CalcBuilder Forum

link an item in the list

User anonymous 2011-10-18 12:59:54

Dear sir/madam

I was wondering is there a way of linking an item in the list to an article, image or pdf?

So what I would like is the ability to search the database (which is believe your list manager already does) and then click on the item found in the list to look at the actual document. Is this possible?

User anonymous 2011-10-18 13:05:27

I tried to display the defined list with another tool. So I searched within all tables of the database, but I could not find tables of List Manager.
Are you saving all values of all defined lists in only one table and all definitions of all tables in a second one?

User anonymous 2011-10-18 13:07:43

Frontend data editor uses correctly a german "JA,NEIN" as boolean.
But if you open these records in the backend, then the german translation does not work.
So the backend editor form does not recognize the JA/NEIN values and shows English "YES/NO".
Fatal is, that backend even shows "YES" in spite of the german "NEIN" (which means the opposite) and saves the "YES" !

User anonymous 2011-10-18 13:10:15


Is it possible to include also (little) pictures in a table of list manager?

User anonymous 2011-10-18 13:19:53


I was looking into the List Manager component and it looks like it might be a right choice for me. But I have one question: is there any practical limit for number of records stored in one list?

User anonymous 2011-10-18 13:20:55

Hi support

I have some problems with List Manager (running on my Joomla 1.7
I can easily install and configure the component. But after that
problems start.

1. When i chose the component menu I see a pop up with " 0: "
When I close the pop up, I can press "Add" and "Save". After that I
the pop up again. And nothing is stored.

On the backend I see the following error, when I press "Data":

"Notice: Undefined variable: i in

on line 49
Notice: Undefined variable: row in
on line 50"

Can You guide me to a solution?

User anonymous 2011-10-18 13:32:57


I just bought List Manager and I was wondering if there's a way to add textarea to the listfield types, or e.g. change e.g. the list field 'User' to textarea.

Now you can add an inputbox and the length, I wish to add textarea with cols and rows. Maybe its possible just to change the inputbox and make it a textarea. Then if you need to add a text line, you could set the options to cols=45 and rows=1.

Is this possible at all?

User anonymous 2011-10-18 20:30:21

I did not know why, but the calculator only works in position "left"
or "right", but not in "user2" or "user3", from - JT014

User anonymous 2011-10-18 20:31:22


Can I just ask, are you able to add 'if' 'elseif' 'and' and 'or' commands into the php code? I know you can normally, but have tried within the calculator and it doesn't seem to like it?

Also, can you use the value of 2 columns matching input to determine an end value in the matrix?

Kind Regards

User anonymous 2011-10-18 20:32:43


I purchased your calcbuilder a couple of days ago, and I'm just struggling a little...

I'm not really a php programmer, and could use some guidance.

I've set up the calculator, but there is a variable that needs to be pulled from a non output matrix.

When the code calculates the $factor I need it to look up from the matrix the $factorB value of that variable and use it in a later calculation.

User anonymous 2011-10-18 20:33:58

Ladies and Gentlemen,

I recently purchased your very nice program Calcbuilder and I am just about to write an application. I would like to change the "Calculate" – Button and the Alert window ( Some values are incorrect) in German. Where can I change these parameters? Is it possible to integrate a second button "Reset” to reset input fields.

Many thanks for help!

User anonymous 2011-10-18 20:35:45

Hello, I just recently purchased Calc Builde. I keep getting an error on the frontend of this extentiopn, Even if I use the code in the Quick Guide. Here is the errors I keep getting:

Parse error: syntax error, unexpected T_LNUMBER, expecting T_VARIABLE or '$' in /components/com_calcbuilder/models/calcbuilder.php(178) : eval()'d code on line 1

Parse error: syntax error, unexpected T_LNUMBER, expecting T_VARIABLE or '$' in /components/com_calcbuilder/models/calcbuilder.php(178) : eval()'d code on line 1

Parse error: syntax error, unexpected ';' in /components/com_calcbuilder/models/calcbuilder.php(204) : eval()'d code on line 1

Warning: Invalid argument supplied for foreach() in /components/com_calcbuilder/models/calcbuilder.php on line 211"

Please help!!!

Edited by anonymous - 18.10.2011 20:36

User anonymous 2011-10-18 20:38:43

I am sorry but I have read through the documentation and looked at the examples but I am still very confused on what to do. I do not program in PHP. Can you at least give me a start so I can at least have an idea where to begin?

Thank you,

User anonymous 2011-10-18 20:40:18

Works brilliant, thanks alot, but I do have some questions:

I need to have one initial form. I am using RSForms to process that. Is there any way I can pass those variables to the calcbuilder form, or perhaps the calc form variables to RSForms?

Thanks for your help!

User anonymous 2011-10-18 20:41:38

Hello medam, sir,,

I have installed calc builder en started with the variables etc.

Now I am stuck at the matrix. We want to have only one result at the end of our flowscedule and at the end of the calculator.

Can you help us with this?

I have an the excel file with the data flow.

Perhaps it’s possible to skip the rest of the questions when people click on first option. We can’t help them.

Is it possible that the next question appears when they made a choice at the first question?

Hoping for your reaction.

User anonymous 2011-10-18 20:43:47

Hi Moonsoft,

your extension Calc Builder looks like it is what I am looking for. I want

to ask if it supports several languages and can be integrated with
joomfish. Thank you for your response.

Kind regards,

User anonymous 2011-10-18 20:45:39

Hello Moonsoft Team,

yesterday I bought Calc Builder from you and started using it. It looks very powerful, but I did run into one problem with it. Our generated table is rather wide and in the generated pdf file it is not formatted correctly. I attached the calculator I created and the generated pdf to this letter so that you can see it youself. Can this problem be fixed somehow? I guess working with formatting in pdf is rather difficult. For us quite acceptable solution to this problem would be to make this functionality of generating pdf, xls and sending emails optional. That is to introduce to the back-end a switcher for turning this functionality on and off. I guess it is not too difficult to implement. Then we would just switched this functionality off. Can it be done somehow?

Thank you for your assistance,

User anonymous 2011-10-18 20:47:06

Hello Moonsoft Team,

One question. We need the left coloumn in the table to be left-justified. Could you tell me how this can be done? Thank you.

Kind regads,

User anonymous 2011-10-18 20:47:51

Hello Moonsoft team,

now I am trying to make Calc Builder work on my multilingual site. I am running Joomla 1.7.1 and I have two languages installed: English and Russian. I created the ru-RU.mod_calcbuilder.ini file and put in inside \modules\mod_calcbuilder\language\ folder. This file is a translation of the original en-GB.mod_calcbuilder.ini. What else do I need to do to make Calc Builder work in Russian (for example to translate the "Calculate" button into Russian)? Thank you for help.

User anonymous 2011-10-18 21:39:48

Hello ,

I want to make a button ( create your boat ) on our website and i want to add all specs of my products. So client will enter and choose what he wants and at the and when he click to calculate button he will see how much it will cost.

Does your calculator enough for it ?

Because my menü will be may be 40 -100 different choises. Does it work well or is there any limit ?

User anonymous 2011-10-18 21:41:50

Hola Chicos,

Me gustaría saber cómo guardar el cálculo de UTF-8 idiomas. Cuando se guarda en el texto de un PDF y XLS es distorsionada!


User anonymous 2011-10-18 21:45:29


You can write me how to change that by introducing the data you could use a comma?

When you enter a data from a comma, eg 5,40 * 5,30 the result is different than when I enter 5.40 * 5.30.

In my commonly used commas.

User anonymous 2011-10-18 21:46:53

Purchased your module last Friday, however when trying the examples I
this error, can you explain !
"Call to undefined method JDocumentRaw::getHeadData() in

/libraries/joomla/cache/cache.php on line 502"

User anonymous 2011-10-18 21:51:24


I need to build a calculator that can take dynamic data from a database
is this possible with your module or is this something that you can build
for me

User anonymous 2011-10-18 21:53:05

Dear Moonsoft,

We like to instruct you to build a calculator on our behalf using your product or Breezingforms , please can you contact us with detail of what you require to start the build process

User anonymous 2011-10-18 21:53:49


I would like to know whether in your component, you can add dynamic fields;

Example: payroll calculator
In the drop-down list I

If I choose my employer is open to specific fields
and if I select the employee is open to me the other fields

I wish you could insert a field with copying its contents into other fields.

User anonymous 2011-10-18 21:54:58


there raised a problem with installing the Calc Builder. I picked appropriate zip file for Joomla v1.5. After uploading got the message "Error! Could not find an XML setup file in the package."

Is there any solution you may suggest?

Many thanks in advance,

User anonymous 2011-10-18 21:56:11

Is it possible to use external sql tables in calc code field?
To pull data from it and use in calculations.

User anonymous 2011-10-18 22:00:54


I think this "i" image inside calcbuilder. How to remove it?


User anonymous 2011-10-18 22:02:02


I saw your plugin to Joomla (calc builder). I'll tried out the demo, but it was not enough with functions that I wished to try..

So my question is. Is it possible to get a free trial or something. I would love to get one.

Best Regards

User anonymous 2011-10-18 22:03:10


I was purshaced your module today, and have some problem with
exporting data from this.
How do i get Cyrillic sybmols displaying in the pdf file, right now they are displaying as "????" . Can you help me?

And second question. How i can translate to Russian language standard

How to remove 'Calculator from CalcBuilder' from exported data?

User anonymous 2011-10-18 22:04:21


Is there a way i can change the number of lines in the output matrix depending on the input of the form, for example if the user inputs number "9" i will need to have nine lines of results and if "19" i wil need nineteen lines.

User anonymous 2011-10-18 22:05:05

Hello, I purchased Calc Builder and am enjoying working with it. Can you
please give me an example of how you code an 'array' (for the multiple
option function).
Thank you,

Moonsoft support 2011-10-20 12:07:49


today I bought the listmanager extension and
try to use it in my homepage. But I have no luck. I use joomla 1.5.22
an a siteground template. In the backend I can manage the list and I´m
also able to add some entrys.
In the frontend I can not the the list entrys. I only see the form
for adding new entrys. Also the buttons cancel, save or add are not
working..... Have you any idea?!?!?!
Thank you for your help in advance!!!


User anonymous 2011-10-21 14:10:45


I've just bought the "list manager" extension. It's a great
component, but I feel a bit disappointed as the most important function for me is that I would like to have the possibility to insert a link inside a field,
like a link to a pdf file for example, as below :

Ref : A0
Type: T1
Map : see map < http: ///images/plan/1.pdf >

Is it possible or should I plan to seek for an other extension ?


User anonymous 2011-10-21 14:14:23

Hi, my list will have a lot columns, about 15 columns, how do they appear across the page?
Is their an option for a ‘more info’ button on every list?

Kindest Regards,

User anonymous 2011-10-21 14:15:10


I see your demo for list manager but i need to see it in admin panel for
check type of field's .
Did you can help about this ?

Thank you

User anonymous 2011-10-21 14:16:25

Dear Gestion,

I have purchased the ListManager and all is clear and nice, but I do get
an error when I try to import data into a table..

The error is: JUser::_load: Unable to load user with id: 94

Joomla ID 94 is a client existing at db

What happens when importing...

Only the first record contains the user name, the others are empy..

Hope you can help me with this issue..

User anonymous 2011-10-21 14:17:45

Do you perhaps have a document available on how to use the stylesheet opton?
as I want to do basic formatting etc.

User anonymous 2011-10-21 14:18:57

I have a problem with the button PDF.
I press the PDF button an then it Display "FPDF error: Could not include font metric file"
What can i do?
Excel export is ok.
Best regards

User anonymous 2011-10-21 14:21:48


Quick question, is it possible to make the name filed in the calculator admin longer? Is there a piece of code I can change?

User anonymous 2011-10-21 14:23:21

Hello, I purchased Calc Builder and am enjoying working with it. Can you
please give me an example of how you code an 'array' (for the multiple
option function).
Thank you,

User anonymous 2011-10-21 14:24:13


Published the module, but calculator button does nothing. Sent you attached how my page is showing.

Please, help.

User anonymous 2011-10-21 14:25:16

I have just bought your CALC BUILDER, it's exactly what i need for the
website i'm creating.
I have one question for you about *linked list*.

My necessity is to get, in the front-end, unnecessary fields hidden
during the form filling.

For example, I have the following option linked lists (B and C both
linked to A):

*Choice A**:* *Animal* *or** Vegetable*
*Choice B*: *Animal_Cat* *or* *Animal_Dog*
*Choice C*: *Vegetable_Tomato* *or **Vegetable_Apple*

Depending on my choice on A, B and C will be populated or empty. *I
don't want the user to see both B and C field, before choosing A*.

Is it possible to get the field visible (in the front end) only if it is

User anonymous 2011-10-21 14:26:02

I have 2 questions:

1. Not rely sure how to paste calculator in the article... I don’t quite
get what you men by saying “where XXX is the position(1) we write in module,
and menu should be available to show module(3)”

2. Is it possible for the administrator to get results user inputs in
calculation by email or in any other form? So to say if someone is using
calculator - administrator gets copy of the results for marketing

Thank you.

User anonymous 2011-10-21 14:27:15


I was looking at your Calc Builder and have a few questions.
Is it possible to implement it so that logged in users can have their
own calculations stored on a profile?

User anonymous 2011-10-21 14:28:10

Hallo moonsoft,

I'm interested in buying you compnent "calcbuilder", but i have several

1) do i get updateses and new version of the component after i buy it?
2) do you accept other payment methods, such as webmoney?

Thanks for your answers,

User anonymous 2011-10-21 14:29:00


Is there a way of adjusting the code so that it automatically sends us a
copy of the email if the email request button is pressed?

Kind regards,

User anonymous 2011-10-21 14:29:44

Hi Moonsoft team
I can't seem to find out where you change the export pdf matrix. The font size is 16px and I need to make it smaller because it's
overlapping and I need the width table wider too.

Thank you

User anonymous 2011-10-21 14:30:46


If purchased the Calc builder.
It is a very nice program exactly what i was looking for.

I got one question.
When i want to work with numbers with decimals (for example 1.5) it works fine.
however it pretty common that people uses 1,5.

Then the program can't calculate it.

Is there a work around for this?
Maybe something in PHP were i can convert it to 1.5 so the program can calculate with the number?

thank you in advance.

Kind regards,

Moonsoft support 2011-10-28 02:43:42

I need to use multiple options to be sum.

White = 100
Black = 200
Blue = 300

Orange = 100
Purple = 200
Yellow = 300

The user choose the 2 options and the values are sum. Ex.:

Option1: White (100)
Option2: Purple (200)

The sum will be 300.

How would be this code, please?

Edited by billwide - 28.10.2011 06:34

Moonsoft support 2011-10-31 18:19:48

How can I add a submit button to use the selected options to have action "submit" in the form? The Submit button must be side by side with the "Calculate" button.

Thanks for any help.

User anonymous 2011-11-01 19:09:52

i wanted to know how to change the background for the whole module.


User anonymous 2011-11-02 18:45:25

Hello everyone,

I have a question and do not know how to solve:

I created a field optin list with several names and values. For me to just show a value I place the $variable = $variableoptionlist; that will come the selected value.

My question is how to show the name and not the value selected?

Can you show me how to show the name and not the value of an type option list?



User anonymous 2011-11-07 10:05:48

I bought the listmanager component and have a question. Where can I change the language that displays in the frontend?

Moonsoft support 2011-11-07 23:49:51

Before purchasing, I checked the other posts about this, and even tried a link on your demo and it worked until I tried to place the kind of link I need in the text field and it's not seeming to work.

Here's the affiliate link like I'm going to need to place in every listing.

a target="_blank" href="">Trance Sitar

Is it too long? For some reason it's not working on my site and you have a limit placed in that field on your demo.

And the down limit and up limit fields won't accept values so I can't try to make them longer.

Your extension is unusable to me unless I can add these links to my list.


Edited by bramsan - 07.11.2011 23:50

Moonsoft support 2011-11-08 02:44:37

I've looked everywhere I can think of for where to change the color that comes up when hovering over a listing. (on my template it's the same color as that on your Best Sellers demo)

Thanks in advance.

Moonsoft support 2011-11-08 20:41:17

Can someone please give an example of how to wrap the results table cells. All I get is one line of text and if it is long it just overwrites on top of itself.

Thank you for your time.

User anonymous 2011-11-10 13:43:09

I meant to ask two quick questions or one maybe a feature request.

A Free Text field so that you can add some descriptions/titles above or below the fields. I take it that this is not possible at the moment?
I wish to remove the down pdf excel file links. Do I have to "hack" to module to do this?


Moonsoft support 2011-11-14 20:57:32

Your extension seems very interesting, but I have a question. I have a list, let's say a products list, with numerous fields. I don't want to show all fields in the list, but only selected ones. Is there a way to view all fields while clicking on the product ? I don't think so, reading your documentation. But is it a future task you're planning ?

Moonsoft support 2011-11-18 11:54:35

I have installed the component and module and i have also uploaded some example files (calculations) from you webpage.
The problem is as follows. When i have opened a calculator i can not change anything. Even a the button save, matrix etc. do not work. it shows on the bottom "error on page"
There is also no result field displayed on the page. Also the export to pdf or excel does not work.

Hope you can help on that.

Thank you very much.



Moonsoft support 2011-11-20 15:43:55

I am trying to make my 1st form but I get errors.
The formula is
HbA1c X 33.3 – 86 = MBG

I want for a given HbA1c to calculate MBG.

So I made 1 variable hba1c and the formula $result=$hba1c*33.3–86;

but I get tis error:
Parse error: syntax error, unexpected T_STRING in /home/netlabgr/public_html/components/com_calcbuilder/models/calcbuilder.php(202) : eval()'d code on line 1

and no result. Any help please?
Thank you!

Edited by hariskar - 20.11.2011 15:47

Edit: I found the solution: The problem was the wrong big minus sign that was pasted in the formula.

Edited by hariskar - 20.11.2011 16:01

Moonsoft support 2011-11-20 16:36:24

Can we hide the title of the module that we have put in the article with {loadposition XXX} ?

Thank you!

Moonsoft support 2011-11-27 20:31:04


I wanted to buy your program, but my friend told me that he read somewhere that your program has SQL Injection Vulnerability. Is that true?

He send me this link

Thank you

Moonsoft support 2011-11-30 10:05:22


I just bought your extension cause I need a simple directory listing for a spareparts catalog.

Now I have created a spareparts listing with five fields.

We have about 5000 spareparts, so this results in 25000 records in the listmanager vlues table.

(imported it with CSV, that worked although it took a while)

now i cannot open the data in my list, I get a memory allocation error:

Fatal error: Allowed memory size of 33554432 bytes exhausted

How can I get this working?

The data list shouldn't try to pick up every record at once, should it?

kind regards,


Moonsoft support 2011-12-01 02:24:55

I have purchased the Calc Builder via PayPal but cannot find the file to download. How do I get the component?

Moonsoft support 2011-12-06 00:19:54

after some operations, i've gotr a result. However i would like the result to be a 2 digits result, like 215.60€. I can only have an answer like 215.5985€.
Is there an easy way to obtain that kind of result ?
Thanks for your help.

Moonsoft support 2011-12-08 12:21:36

I have tried to create a calculation form for box prices , and I keep getting an error , I am sure my calculation script is incorrect.
Error :
" Parse error: syntax error, unexpected ',' in /com_calcbuilder/models/calcbuilder.php(202) : eval()'d code on line 9

Parse error: syntax error, unexpected ';' in /com_calcbuilder/models/calcbuilder.php(204) : eval()'d code on line 1

Warning: Invalid argument supplied for foreach() in /com_calcbuilder/models/calcbuilder.php on line 211 "

This is the calculation I am trying to create ;
The formula:

(2x length + 2x width + 63 (mm))
(1x width + 1x debth + 20(mm))
divided by
equals amount of m2

(m2 x 479)
divided by
Equals the weight in gram


price per ton in gram (1ton: 10,600.- therefore 1gram R0,01- this is a variable figure and will have to be adjusted as per current price/price increases)


price of box
Below is a copy of the current XML export of my calculator :

Box Price Calculator$mm1=63;


Any help would be appreciated.

Thanks in advance'

Moonsoft support 2011-12-12 11:35:54


I accidentally massacred the default css - where can I find another original?
Also I wondered how I simplify the top bar, I don't need the search box or the next/previous or "show all" buttons - how can I remove them? I just want a simple sortable list without background.

Thank you very much for your help!

Moonsoft support 2011-12-14 23:33:39


I am having some issues installing 0.0.3 of listmanager onto my joomla 1.7.3 website. 0.0.2 installed without a hitch but there are some features in 0.0.3 that i really want/need

The component installs fine but the module fails with this error:

JInstaller: :Install: Error SQL DB function failed with error number 1146
Table 'catsailor_joomla.aoayz_listmanager_field' doesn't exist SQL=ALTER TABLE `aoayz_listmanager_field` ADD COLUMN `total` tinyint(4) NOT NULL default '0';

ALTER TABLE `#__listmanager_field` ADD COLUMN `total` tinyint(4) NOT NULL default '0';

Component Install: SQL error file DB function failed with error number 1146
Table 'catsailor_joomla.aoayz_listmanager_field' doesn't exist SQL=ALTER TABLE `aoayz_listmanager_field` ADD COLUMN `total` tinyint(4) NOT NULL default '0';

ALTER TABLE `#__listmanager_field` ADD COLUMN `total` tinyint(4) NOT NULL default '0';

Please advise how to get this working.



Edited by darren_flanagan - 14.12.2011 23:35

Moonsoft support 2011-12-22 18:38:32

I am trying to include some text with some ROI calculators to explain to the user how the calculationis done. As I cannot include text in the Calc Builder itself, I've added some PHP to the pdf creation module but I'd like to have different calculators use different explanatory text. Can I pass a variable from the calculation entry area to the pdf, Excel and email creation modules?

Moonsoft support 2011-12-22 18:40:40

Is there a way to have Calc send an email with results when the user clicks the calculate button?

Moonsoft support 2011-12-23 15:23:48

Just found one rather minor issue. But it's kind of annoying though:

When you hover the mouse cursor above the "info" icon two pop-up hints appear. One bacause of default browser behaviour showing the pop-up when a TITLE parameter is defined inside <IMG> tag. And there is the second one I can't figure our where is it from.

Please take a look, how it appears in the latest versions of IE, Firefox and Chrome:


Internet Explorer:


Edited by jennik - 23.12.2011 15:27

Moonsoft support 2011-12-29 13:29:55

Hallo everyone.

I have just encountered an interesting problem in my calculations... I need to round up numbers sometimes normally (1.1 -> 1; 1.5 -> 2) and sometimes I need to force rounding down (1.9 -> 1) sometimes up (1.1 -> 2). Why? Because when the result of 2.9 business cards to be printed together on one A4 paper means that there will only be 2 of them usable.

While unable of any advanced PHP coding I have seemingly solved it via this formula:

// Let's have the input number $num rounded normally

// Let's substract the rounded value from the input one

// Let's force $num to be rounded up everytime
// If the result is biger then 0, add 1 to the rounded number
if ($subst > 0) $num_round_up=$num_round+1;
else $num_round_up=$num_round;

// Let's force $num to be rounded down everytime
// if the result is bellow 0, substract 1 from initial rounded number
if ($subst < 0) $num_round_down=$num_round-1;
else $num_round_down=$num_round;

This works quite well with any bumber up to 999... but, above thousand it's messed up thanks to the fact, that the initial rounded number features "," divider - 1,000 and it's broking any other math processes.

Please, could you recommend any other reliable solution for rounding the resulting number up and down while letting it be pur number in the end?

You can download my calculator here:

Moonsoft support 2012-01-01 23:04:36

I've purchased and installed List Manager 0.0.3 in a Joomla 1.7.3 site. I can create a new list and add entries using the administrative screens, but when I put List Manager for that list on a menu item and try to access it from the frontend I get this message:

Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, xxx and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Apache/2.2.3 (CentOS) Server at xxx Port 80

The Apache error log shows:

PHP Warning: Invalid argument supplied for foreach() in modules/mod_listmanager/tmpl/content.php on line 717
PHP Warning: Invalid argument supplied for foreach() in modules/mod_listmanager/tmpl/content.php on line 749
Premature end of script headers: index.php

Where shall I send the URL so you can see this error for yourself?


Moonsoft support 2012-01-04 06:04:13


J'ai acheté le composant "calc builder" il y a une semaine environ. Depuis j'ai jamais réussi à faire de calcule. Poutant, le calcule que je souhaite faire est très simple.

Exemple :
Départ : Paris
Arrivé : New york
Nombre de personne : 2
Prix : 1000 €

Je voudrais mettre en place plusieurs destinations. Je ne comprends pas le principe de fonctionne de "calc builder". J'ai générer la matrix de sortie j'ai eu page d'erreur à chaque fois. Du coup, j'ai tout effacé et maintenant je ne sais pas comment m'y prendre.

J'ai fouillé sur le forum mais rien à faire.

Pouvez-vous m'aider svp ?

Voici la page :

Moonsoft support 2012-01-11 13:05:57


I'm looking to build a salary calculation tool based on some research we have had done. This involves...

A form with a series of questions

Each question has a 'mark' or score

The scores are added together to give total out of 110

This total is then used to calculate the salary. Our data includes three data points an upper, lower and median salary. We would output these three values from the mark.

Am I looking at the right component to do this?

Thanks for your help/input


Edited by theblackbubble - 11.01.2012 14:08

Moonsoft support 2012-01-11 14:43:13

Upon attempting to upload the sample calculators into Calc Builder component I get a blank screen and nothing happens. I am using Joomla 1.7.3.

Moonsoft support 2012-01-12 14:23:17


I installed list manager on my joomla site Versie 1.7.3.
Installation of component plugin and module works fine.

I can make a list, but on the frond end i can add data (rights and settings in menu are good)

When i want to add data in the back-end i get a lot of errors.

What could this be ?

See this link for a print screen of the errors



Moonsoft support 2012-01-13 03:05:46

Hi. I'm no php coder so some of this may seem really noob. I am trying to build a calculator that has 2 input fields.

Field 1: input number
Field 2: input number (percentage) but has a starting default number (6%) that can be changed
Calculation: Field 1 multiplied by Field 2 (percentage), dvided by 2 then multiplied by 20% = answer

Can u give sample code I can start working off of? I need to create a variety of these that use simular formulas.


Moonsoft support 2012-01-13 12:14:23

Hi I've bought and installed your product and everything is good, it does just what I wanted.

However I have a slight problem with sending email. Every time I try to send I get the message "Error sending Email, Try again later".

I'm running Joomla 1.73, PHP 5.2.17 Mysql 5.0

Any ideas?
Many thanks

Moonsoft support 2012-01-13 16:37:35


I'm trying to use a Linked list following the Guide -- but it is not working:

- I have an option list with variable "sistema" and a linked list with the variable "sistema_modulos"

- After that I've tryied to link the options the same way but it is not working

You can see the lists here

I can send you a login to back end if you want it -- send by e-mail


Moonsoft support 2012-01-19 02:07:09


I've recently used ListManager on my site and am looking for a way that a user can edit only their own records but be able to view everyone's records.

Is there a way to achieve this?
Please advice.


Moonsoft support 2012-01-22 07:56:50

I purchased LIST MANAGER component, I installed and tested in joomla but it seems to be having a bug.
I'm getting an error when I view the list manager page: 505 - INTERNAL SERVER ERROR
Could you please assist.

Brian Mwashi

Edited by moon_239 - 22.01.2012 07:57

Moonsoft support 2012-01-22 19:34:31


Is it possible to have many views of the same table, I've a table with 50 colomns, I thought it would be easier to have 5 lists with 10 colomns than 1 with 50 colomns.


Moonsoft support 2012-01-24 03:15:29

I created a List with Chinese contents. It shows Chinese contents on the web site without problems. However, when I export my List to either pdf or Excel format, the Chinese contents do not show up instead showing with ?????. How can I show the contents with Chinese characters in pdf or Excel? Thanks.

Moonsoft support 2012-01-24 19:18:14


when I want to edit an entry and click on the pen, the entry appears and all field are filled in but the text area. It is empty. What can I do here?

Then when I edited the entry and click "save" it creates a new entry and the old one which I wanted to edit still exits.

Moonsoft support 2012-01-24 21:57:23

I have downloaded both 0.0.2 and the 0.0.3 files, when I try to upload them through extension manager, it gives me an error code saying there was an error uploading the file to the server. Am I doing this right? How do I successfully upload the file?

Moonsoft support 2012-02-02 12:58:47

I just updated my Joomla from 1.7 to 2.5 and hoped that this extension would work in 2.5 like almost all other 1.7-extensions. It seems though that it has problems with views (like Jevents had) or something else because I have white screen when I try to view the component from frontend. Or is it just me doing something wrong? Backend works fine though. I hope you're working currently with new version because this extension looks like a perfect piece to my puzzle. ;)

Moonsoft support 2012-02-04 18:56:57

Hi. List Manager not working with some templates.
For example

Moonsoft support 2012-02-04 21:51:53


I have downloaded this great tool a few days ago. Luckily, this tools only works on the home page, but not on the targeted page. When I push the calculate button, nothing happens. The result matrix does not show up. I have tried many things and still did not work. Please advise.

Here the link below for my website:


Moonsoft support 2012-02-10 18:30:21

Dear Moonsoft,

How can a date field be filled in automatically?

Many thanks for this great tool.


Moonsoft support 2012-02-11 20:08:48


Your component don't work with Yootheme i try lot of solution but nothing!
I need help pleased.

I have this error
Warning: require(/homez.380/nsvge/www/test/modules/mod_listmanager/tmpl/content.php) : failed to open stream: No such file or directory in /homez.380/nsvge/www/test/components/com_listmanager/views/listmanagerfront/tmpl/default.php on line 26

Fatal error: require() : Failed opening required '/homez.380/nsvge/www/test/modules/mod_listmanager/tmpl/content.php' (include_path='.:/usr/local/lib/php') in /homez.380/nsvge/www/test/components/com_listmanager/views/listmanagerfront/tmpl/default.php on line 26"

Moonsoft support 2012-02-13 08:15:51

I love your product. The only problem is, that i have absolutey no knowledge in writing the calcbuilder codes. Is it possible to make the Calculation first in an Excel sheet and convertet it then into the right code automatically. For example with a converterprogramm ? I would like to build at least 15 Calcbuilders for alle kind of bicycle calculations.

Thank you very much.



Moonsoft support 2012-02-14 23:26:56

Hi everyone,

Just having problems setting up List Manager on Joomla 2.5. The entries appear blank and the entry box doesn't show up.

Could this having anything to do with Mootools or jQuery conflicts

Please see

Any ideas would be greatly helpful

Moonsoft support 2012-02-15 20:39:34

Link to page I'm working on:

The search and show options look out of format... and truthfully, I would prefer they not be there... my list should never grow past say even 12 players per team, and if they are all on one page that's all I need to show.

Also, when I refresh the page I can see the "edit" screen pop-up then go away... no one on the front end should ever be able to change players... is there a way to stop that?

Moonsoft support 2012-02-23 12:06:41

I just purchased and installed Calc Builder. I then imported the BMI sample calculator and displayed it on this page:

It is on the bottom left of the page.

Any attempt to return the calculation results in this error

Fatal error: Call to undefined method JDatabaseMySQL::escape() in /home/content/XX/XXXXXXXXX/html/fmiosa/components/com_calcbuilder/models/calcbuilder.php on line 68

I've tried a couple of calculators and they all give the same error. Also, I have no javascript errors on the page. I noticed that is the cause for many here.

I have tried disabling plugins but that has not helped either.


Moonsoft support 2012-02-25 19:04:31


I can't select calculator in module (screen:

On the page - - I've errors:

Warning: Invalid argument supplied for foreach() in /modules/mod_calcbuilder/tmpl/user.php on line 335

Warning: Invalid argument supplied for foreach() in /modules/mod_calcbuilder/tmpl/user.php on line 374

Moonsoft support 2012-02-26 07:26:18

When I use the Simple Calculator the correct sum is given but I keep getting the follwing message:
" Warning: array_diff_assoc() : Argument #1 is not an array in /home/*****/public_html/ on line 612 "

I changed the global system error reporting to simple but no change.


Moonsoft support 2012-02-27 12:06:36

Dear Moonsoft,

I would like know the last version for Listmanager, actualy I use version 0.0.3, this version is ready for Joomla 2.5.1?

I try to download directly the lastversion in your new website and I have error 404 "category not found"

Best regard.

Fred - France.

Moonsoft support 2012-02-29 00:39:22

I could write only 44 letters into the input-field (name). If I change in administrator / components / com_calcbuilder / views / tmpl / edit.php Linie 228 + 408 from size=10 to size=20 the input-length only is changing. If I write longer sentences and save the documents the letters are cut after 45 letters. I would like to write input name as longer description with several sentenses. Can you help me?
I use Joomla1.5.25
Thank you

Moonsoft support 2012-02-29 13:15:59

I have a problem. I translate en_GB to czech and use cs_CZ, but calc builder isnt support diacritic. Not on buttons and not in export to XML and PDF.
Diacritical marks are represented by a question mark. Please help, I need that. Thank you.

Moonsoft support 2012-03-02 10:05:30

Hello! Could you please tell me how could I create discounts like in your demo sample "Mail post service?" I just would like to show a discount, in a case if client orders multiple items!

Moonsoft support 2012-03-05 11:35:50


If I use module class suffix, then export and send to email functions does't working! How can I fix this problem?

Thank you

Moonsoft support 2012-03-05 11:50:04

Hi, this is the 1st time I have used ver 2.0 you have done a great job of adding the features we needed from ver 1.

When I tick Send Form Results in Preferences I get the following error on calculation

Warning: file_get_contents() : URL file-access is disabled in the server configuration in /homepages/40/d406059736/htdocs/samsungehs/components/com_calcbuilder/models/calcbuilder.php on line 322

Warning: file_get_contents( : failed to open stream: no suitable wrapper could be found in /homepages/40/d406059736/htdocs/samsungehs/components/com_calcbuilder/models/calcbuilder.php on line 322

The email is being sent and I am receiving it okay, just need to remove the error file.

Moonsoft support 2012-03-06 18:09:30

Hi, I am using version 0.1.1.
I have two option lists in my calculation page.
When "Enter" key is pressed after selecting items from the option lists, we are directed to a results page instead of showing the results of the ajax request on the same page.
The results page is a white page consisting only the calculation results.
Is it possible to have the results shown on the same page instead of being directed to the results page when enter key is pressed from the keyboard.

The "calculate" button works as we wish.
We need the "enter" key to work like clicking "calculate" button.
Please let us know if you can understand why this may happen.

Thank you in advance.

Moonsoft support 2012-03-09 15:08:32

It´s possible that i can have the tutorial or help documentation in spanish

Moonsoft support 2012-03-13 01:49:50

I ve installed the component and I am able to show the sample formating numbers on a certain article. However when I press the calculate nothing happens. Please can you help
I am getting this as a debug $("13283_cb_result").dissolve is not a function

the link is

Moonsoft support 2012-03-13 09:33:25

I have some troubles getting Calc Builder to interact with a table in a MySQL database.

The database name is ‘ifabrix_com’ and the table is called ‘Konstruktioner’.
You can see the table on the homepage
Each row in the table is a ‘Konstruktion’.

At the bottom you can see the calculation module. I want the drop down menus a1-d1 to contain values from the column Konstruktion.

I have tried following in the field type ’Option list’ under add SQL string but it doesn't work:
SELECT ‘Konstruktion’ from ‘Konstruktioner’
USE ’ifabrix_com’; SELECT ‘Konstruktion’ from ‘Konstruktioner’

I also need to pull out the value ’Døgnlagringskapacitet’ attached to each ‘Konstruktion’ for further calculations.

I’m looking forward to hear from you.

Moonsoft support 2012-03-14 20:09:04


I have a mysql database with names of cities, each city has a zone value.
Please, help me to write SQL to get list values from database.

MySQL database name is 'tr_bilet'

Table name is 'city_zone'

Columns are 'city' and 'zone'

Thank you!

Moonsoft support 2012-03-15 15:32:01

Warning: simplexml_load_file() : /tmp/phpXsZdI4:1: parser error : Start tag expected, '

Warning: simplexml_load_file() : PK in /home/atyafsa/public_html/home/administrator/components/com_calcbuilder/models/utility.php on line 421

Warning: simplexml_load_file() : ^ in /home/atyafsa/public_html/home/administrator/components/com_calcbuilder/models/utility.php on line 421

Fatal error: Call to a member function children() on a non-object in /home/atyafsa/public_html/home/administrator/components/com_calcbuilder/models/utility.php on line 440

Moonsoft support 2012-03-21 09:18:32

The Component and the Module works. But if i push the Calculate Button, nothing happens. I`ve read the other treads with same issue, but it seems the problem would be an another. The Page runs with K2 … here is the link


Moonsoft support 2012-03-22 15:49:34

how can i change the template,

i want to add for the multiple option.


Moonsoft support 2012-03-24 14:26:04

Hi everyone,

First of all, I would like to thank you for the good product.
I am not an expert in php, so I have been trying to create a simple calculator using your "Business cards" template. I still can not find a way to round up numbers, even tried the solution described in a previous post here.

Here is my code:
//base price



if ($language=='NL') $base=16.00;
if ($type=='E') $base=$base*1.5;
if ($pages>30) $base=$base*0.97;
if ($pages>50) $base=$base*0.93;
if ($pages>100) $base=$base*0.90;


The exit lay-out:

Number of pages ##pages##
Price per unit ##base##
Total price ##var1##

As I said, I took as a base the Business cards template and modified to my needs.
The calculator will have to calculate the price for translation services from one language to another. So, the normal price is 13, if from NL: 16. As you can see on the code, there is also discount depending on the number of pages.
So, I would like to have the 'base' (price per unit) and the '$var1' displayed with 2 numbers after the comma.
I would even go even deeper and put an 'if', so the discount is displayed on a separate row below the number of pages and the price per unit only the cases when a discount applies and then the total. But I suppose it's too far for my php knowledge :-)

Second issue that I experienced is the display of the calculator within an article. It does not include the main menu on the left. I am using the standard Beez5 template from Joomla and I tried everything, but I could not get the menu displayed on the article with the calculator. Strangely enough, I have the same issue with the Xmap.

I do realise that it might not be part of your support tasks to help anyone with the php codes etc., but I would really appreciate if you could help me with the above issues!

Many thanks in advance8

Moonsoft support 2012-03-27 22:47:18


I have tried many methods to get a CSV file loaded into a matrix but can't seem to get the matrix to format correctly with 6 columns.

I end up with 1 column and all 6 column values per row entered into the 1 cell of each row in the single column.

Please advise.

Aaah, I have this sorted. No problems.


Edited by moon_336 - 28.03.2012 09:55

Moonsoft support 2012-03-27 22:49:27

I have tried all suggestions in various threads as well as attempted my own solutions to change the Exit Layout.

Nothing seems to work.

Please advise.

Moonsoft support 2012-03-29 03:55:15

When I point to next page or search, get a Tool Tip. How can I disable them



Edited by moon_396 - 29.03.2012 08:28

Edited by moon_396 - 29.03.2012 08:28

Moonsoft support 2012-03-29 11:28:09

I cannot explain what happens.. You just have to take a look.

Moonsoft support 2012-03-29 14:20:46

I've purchased and installed List Manager Version 0.0.3 in a Joomla 2.5.1 site. I can create a new list and add entries using the administrative screens, but when I put List Manager for that list on a menu item and try to access it from the front end then only add entries form appears but list added by is not appearing in the front end, and event i am not able to add list from from end also.

I am using this list manager here on this site (url given below)

Can you tell me the problem.


Moonsoft support 2012-03-29 19:16:16

I have purchaed the calc component.I have joomla 1.6 installed and i installed the 0.1 v ersion in my site.

But i am unablet to see the admin menu options for eg no options there to display such as Genereal, fieldcode,sections, prefrences etc.

Please let me know the solution

Also let me know if you have any query for me


Moonsoft support 2012-03-30 15:59:14

We remove the container console error form the page and still we are facing issue on this page. Now we have still one console error on this page which is
$(“_lisr_adminform”).task id undefined
This error is appear on line no. 1441 in modules/mod_listmanager/tmpl/content.php this files
Please help us to sort out this issue.

Moonsoft support 2012-04-02 13:50:15

I have Joomla 1.5.26 installed, installed the Calc Builder Component and Module, but cant install the model files. Getting the following error:

Warning: simplexml_load_file() : /tmp/phpSgWubU:1: parser error : Start tag expected, 'odels/utility.php on line 421

Warning: simplexml_load_file() : ^ in /home/exlifn/public_html/demo/administrator/components/com_calcbuilder/models/utility.php on line 421

Fatal error: Call to a member function children() on a non-object in /home/exlifn/public_html/demo/administrator/components/com_calcbuilder/models/utility.php on line 440

Any advice ?

Moonsoft support 2012-04-11 07:06:13

I am attempting to insert my very first "cost calculator" i've created into my webpage. Using Joomla 2.5, I go into the Module Manager and click Add but I do not get an option to select 'Calc Builder' as a module type. If I can't create a Calc Builder module and set a position, then I can't insert my calculator into an article using the {loadposition XX} either. Am I missing something or can someone help me please?

Moonsoft support 2012-04-11 14:02:15

Calc Builder 2.0 is a great Joomla Extension, worked perfect!

but don't display all statistics (like an older version):


Moonsoft support 2012-04-12 00:28:22


I want to send an email to administrator not on calculate but as a kind of submit-button.

Is there a way I can make a default email address instead of the inputbox that shows when the "Show send by email?"-option is active.

In that way a customer can try to calculate various combinations of diffenrent goods and when satisfied click the submit-button and the administrator gets the preorder- or enquiry-form.


Moonsoft support 2012-04-17 12:19:41

Not logged in the list is showed perfectly!

As soon as you logged in on the frontend I get a 500 error. The page isn't showed :-(.

It's a Joomla 2.5.4 installation.


Moonsoft support 2012-04-23 22:19:20

After clicking calculate the space where the results are supposed to show up drops down then slides back up and no results are shown. What is happening??

To see example please go to

Moonsoft support 2012-04-24 02:02:33

I sent this in as a support ticket as well, not sure where you want it...

I am unable to run any calculator.

Here is the Simple Calculator:
When I click calculate on the simple add calculator I imported from your site I see

500 - Unable to load renderer class
No matches found

Alternative actions:

Home Page
Search for: index
If difficulties persist, please contact the system administrator of this site.

Unable to load renderer class

My php error log shows:

PHP Parse error: syntax error, unexpected = in /home/*********/public_html/components/com_calcbuilder/models/calcbuilder.php(197) : eval()d code on line 1

Moonsoft support 2012-04-25 21:54:53

How do I create a calculator that is already set up in excel? Don't know php

Moonsoft support 2012-04-26 06:13:51


Is it possible to remove the calculate button and have the exit layout variables visible and populate and update instantaneously (1 - 2 seconds) when a user enters a value into the form?

I'd like to skip the user having to click the calculate button to see the results and have the results display in real time as they are manipulating the form.


Moonsoft support 2012-04-26 14:09:10


I know we have had a few threads in the past...

Can you quote me to do some customisation of calcbuilder?

I need...

Secure PDF output
Results stored against a logged in Joomla user
Option for results only to sent via PDF i.e. not on screen
Data stored in MySQL table for statistical analyses/export later

I've got a demo of our code so far if it helps.

Many thanks!

Moonsoft support 2012-04-26 14:40:36


Don't know if this is possible. On the list out put the text in the 'Text Area' box loses it's format when saved.

For example I input it like this

Line 1
Line 2
Line 3

But it comes out on the saved page like this

Line 1 Line 2 Line 3

It's as if the carriage return is being ignored. Is there a way to retain it's format?

Also is it possible to change the date output format? It reads 2012-04-26 I would like it to read 26-4-2012.

And lastly (sorry) under the basic options there is an option to order the output by the column name. I tried it by date and it works but it orders it by the oldest date first. I need it by newest date first.

Thanks :)

Edited by moon_459 - 26.04.2012 16:06

Moonsoft support 2012-04-27 01:23:02

Why is there no tutorial or documentation showing different code? The downloading examples does not show me to much. This app is very difficult to use. The code portion needs to be drop down as well such as multiply this to that. I am trying to do this, Where the agent can input his policy #'s for the month in different lines of business and input Avg premium which would already be set but can be changed. And it would calculate years of commissions from 1-5 real easy. I understand I can create field for each cell.

For example lets say the agent inputs $500 for average auto premium and he sells 10 policies.

I need (num1 500)*10%= 50 (num2 10)*50= 500 500*80%=400 400 new business commissons

then After 1 year (num2 10)*50*2 = 1000*60%= 600

So it would look like this

avg. premium: $500 # of polices: 10
New Business Commissions = $400 /month
After 1 Year = $1000 /month
2nd yr. ect..
3rd yr ect..


Business: Avg Premium: Comm Comm # month:Income/mo:
Auto $500 10% $50 30 $1,500
Homeowners $800 14% $112 5 $560
Umbrella $250 15% $38 0 $0
Life - $500 40% $200 0 $0
Life - $0 50% $0 $0
Speciality $0 15% $0 $0
Sm Business $2,500 15% $375 2 $750
Work Comp $0 15% $0 $0
Comm Auto $0 10% $0 $0
Total Renew 37 $1,686
Total 1st Year 101 $3,686 ---This calculates new business and renewals---

After 2nd Year

Business: Premium:NB Comm: Commission: # month: Income/mo:
Auto $500 10% $50 60 $3,000
Homeowners $800 14% $112 10 $1,120
Umbrella $250 15% $38 0 $0
Life - Term ins $500 40% $200 0 $0
Life - UL Target $0 50% $0 $0
Speciality $0 15% $0 $0
Sm Business $2,500 15% $375 4 $1,500
Work Comp $0 10% $0 $0
Comm Auto $0 10% $0 $0

Total NB /month: 74 $3,372
Total 2nd Year Commissions 101 $5,372

Moonsoft support 2012-04-27 03:20:06

whats wrong here


the only two variable fields are p1 and num1 im trying to have all the math done on the back end and display results when i try this it says something is incorrect.


Moonsoft support 2012-04-27 15:27:57

Ok I have no idea what I am doing wrong. I have been working on this for awhile and it is getting annoying. There is NO preview button so I have to keep going back into the website to view if its working.

Variable ap1 is number default at 500
Variable nb1 is number default is 10% or .1
Variable num1 is number NO default




This results in some values are incorrect??

Moonsoft support 2012-04-27 16:45:56

Even when I try to copy the simple calculator into another calc. it gives me the some values are incorrect. It looks like the same exact calender the php code is the same I copied and pasted it and same as the layout. Yet the simple calender works and the new one gives the error. I have no idea what the deal is. Thinking I will take a refund here real soon.

Moonsoft support 2012-04-27 22:07:01

Ok I got the value error to go away now I need this to calculate three things commissions for years 1-3 and display like this

New Business Commissions $100
Monthly Commissions @1yr $300
Monthly Commissions @2yr ect.
Monthly Commissions @3yr ect.

I think the top is correct the way it calculates results is messed up. Heres the code



/*New Business Commissions*/

/*Monthly Commissions @1yr*/

/*Monthly Commissions @2yr*/

Moonsoft support 2012-04-28 22:35:34

Do you have an email address to quote a calculator? Its in excel format

Moonsoft support 2012-04-29 14:46:11

when i try to export calculator it gives me the following message

No webpage was found for the web address: http://websiteaddress/index.php?option=com_calcbuilder&controller=utility&task=export&format=exml&cid=11

Error 6 (net::ERR_FILE_NOT_FOUND): The file or directory could not be found

Moonsoft support 2012-05-08 16:18:00


is it possible to change the text area field (after clicking the 'Add' button) customized width and height? At this moment a visitor needs to drag the area to have a good look at the words that are typed. In my case I want a text area field width from 500px an 50px height.

Kind Regards,


Moonsoft support 2012-05-14 06:54:41


cahnged templates a few time but always end up with the screen show the add a record button

Tha workd

The search works and when you click on the pencil edit you can edit but the area where the records should be just has the grey arrow block with no text showing., view source reveals the page is not populated,

Source from body follows. joomla 1.7


if (typeof jQuery == 'undefined') { document.write(unescape("%3Cscript src='/www/templates/perma_2.5/modules/jquery171.js' type='text/javascript'%3E%3C/script%3E")); }


Manage Members

Calendar._DN = new Array ("Sunday", "Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday", "Sunday"); Calendar._SDN = new Array ("Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat", "Sun"); Calendar._FD = 0; Calendar._MN = new Array ("January", "February", "March", "April", "May", "June", "July", "August", "September", "October", "November", "December"); Calendar._SMN = new Array ("Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"); Calendar._TT = {};Calendar._TT = "About the Calendar"; Calendar._TT =
"DHTML Date/Time Selector\n" +
"(c) 2002-2005 / Author: Mihai Bazon\n" +
"For latest version visit:\n" +
"Distributed under GNU LGPL. See for details." +
"\n\n" +
"Date selection:\n" +
"- Use the « and » buttons to select year\n" +
"- Use the buttons to select month\n" +
"- Hold mouse button on any of the above buttons for faster selection.";
Calendar._TT = "\n\n" +
"Time selection:\n" +
"- Click on any of the time parts to increase it\n" +
"- or Shift-click to decrease it\n" +
"- or click and drag for faster selection.";

Calendar._TT = "Click to move to the previous year. Click and hold for a list of years."; Calendar._TT = "Click to move to the previous month. Click and hold for a list of the months."; Calendar._TT = "Go to today"; Calendar._TT = "Click to move to the next month. Click and hold for a list of the months."; Calendar._TT = "Click to move to the next year. Click and hold for a list of years."; Calendar._TT = "Select a date."; Calendar._TT = "Drag to move"; Calendar._TT = "Today"; Calendar._TT = "Display %s first"; Calendar._TT = "0,6"; Calendar._TT = "Close"; Calendar._TT = "Today"; Calendar._TT = "(Shift-)Click or Drag to change the value."; Calendar._TT = "%Y-%m-%d"; Calendar._TT = "%a, %b %e"; Calendar._TT = "wk"; Calendar._TT = "Time:";

window.addEvent('domready', function() {
$$('.hasTip').each(function(el) {
var title = el.get('title');
if (title) {
var parts = title.split('::', 2);'tip:title', parts);'tip:text', parts);
var JTooltips = new Tips($$('.hasTip'), { maxTitleChars: 50, fixed: false});
token: "wfa988f8ba644e63ce67cfbe84fcc59509",
base_url: "",
language: "en",
directionality: "ltr",
theme: "none",
compress: {"javascript":0,"css":0}

HomeAbout Mudgee MBAWhat We DoOur CommitteeEventsMeetingsMBA MembershipMember BenefitsCommittee LoginMember DirectoryContact UsManage Members

Custom slogan


var arrDatos1535801389_;

var arrCabeceras1535801389_;

var altoform1535801389_;

var arrEditores1535801389_="";

function validateForm1535801389_(f) {

if (document.formvalidator.isValid(f)) {

f.check.value='d4cac78253cea7bb8d2ac359e55768e3'; //send token

return true;


else {

var msg = 'Some values are incorrect';



return false;


function showMessage(param){

/* efectos 5



$('1535801389_divmessage').setText('Record saved');




$('1535801389_divmessage').setText('Record deleted');


new Fx.Style($('1535801389_lm_message'),'background-color', {duration: 1000}).start('#fff','#FEFDC3');

new Fx.Style($('1535801389_lm_message'),'opacity', {duration: 1000}).start('0','1')

new Fx.Style($('1535801389_divmessage'),'opacity', {duration: 1000}).start('0','1').chain(function(){

new Fx.Style($('1535801389_divmessage'),'opacity', {duration: 7000}).start('1','0');

new Fx.Style($('1535801389_lm_message'),'background-color', {duration: 7000}).start('#FEFDC3','#fff');

new Fx.Style($('1535801389_lm_message'),'opacity', {duration: 6000}).start('1','0');

}); */



$('1535801389_divmessage').set('text','Record saved');




$('1535801389_divmessage').set('text','Record deleted');


$('1535801389_divmessage').set('tween', {duration: 1000});

$('1535801389_lm_message').set('tween', {duration: 1000});

/* efectos 6*/


duration: 5000,

transition: Fx.Transitions.linear,

link: 'chain'


$('1535801389_divmessage').tween('opacity', '1').tween('opacity', '0');


duration: 5000,

transition: Fx.Transitions.linear,

link: 'chain'


$('1535801389_lm_message').tween('opacity', '1').tween('opacity', '0');


function editValue1535801389_(key){




for(var i=0;i0&&nuevapag=parseInt(('1535801389_pagtotales').value)){





function goToPage1535801389_(page){







function repaginar1535801389_(){

var numreg=0;

for (var r in arrDatos1535801389_) {






var porpag=$('1535801389_porpag').getProperty('value');

var total=Math.ceil(numreg/porpag);



function orderForColumn1535801389_(ordercol,numcol){





var arrCopy=new Object();

var arrTemp=new Array();

var ind=0;

for (var r in arrDatos1535801389_) {



//TODO aqui cambiar funciones para especificar tipo de campo (is_numeric??)


arrTemp.sort(function(a, b){

var nameA="";

var nameB="";

if(a!=null) nameA=a.toLowerCase().replace(/]+(>|$)/g, "");

if(b!=null) nameB=b.toLowerCase().replace(/]+(>|$)/g, "");





if (nameA nameB)

return -1

return 0 //default return value (no sorting)




arrTemp.sort(function(a, b){

var nameA="";

var nameB="";

if(a!=null) nameA=a.toLowerCase().replace(/]+(>|$)/g, "");

if(b!=null) nameB=b.toLowerCase().replace(/]+(>|$)/g, "");





if (nameA nameB)

return 1

return 0 //default return value (no sorting)



for(var i=0;iarrTemp.length;i++){







function recogeDatos1535801389_(){






var nameorder="Surname";

var numorder=-1;

var idorder=-1;

var colorder=-1;


for(var i=0;iarrCabeceras1535801389_.length;i++){












if ($('1535801389_filtertext').value!=""){




function filtraDatos1535801389_(){

var busca=$('1535801389_filtertext').value.toLowerCase();

for (var r in arrDatos1535801389_) {

var arrReg=arrDatos153501389_;


for(var o in arrDatos1535801389_){


if(arrDatos1535801389_.toLowerCase().replace(/]+(>|$)/g, "").indexOf(busca)>-1) arrDatos1535801389_='0';









function createTableData1535801389_(){

var arrtotales=new Array();


var thead=new Element('thead');

var trhead=new Element('tr');

for(var i=0;i(pagact-1)*porpag&&numreg=pagact*porpag){

var trdato;


trdato=new Element('tr',{'class':'lm_trwhite'});


trdato=new Element('tr',{'class':'lm_trblack'});

for(var i=0;iarrCabeceras1535801389_.length;i++){



var tddato= new Element('td');










var valordato=arrDatos1535801389_];

var intervalo=arrCabeceras1535801389_-arrCabeceras1535801389_;

var valorreal=valordato-arrCabeceras1535801389_;

var porc=parseInt((valorreal*100)/intervalo);












var imgedit = new Element('img').setProperties({src:'','class':'lm_selectable lm_hasTip2',

'title':'Edit :: Edit record contents',



var imgdelete = new Element('img').setProperties({src:'','class':'lm_selectable lm_hasTip2',

'title':'Delete :: Delete record',



var tdopt= new Element('td',{'class':'lm_lasttd lm_lasttdoff'});








///linea extra de totales

///linea de totales

///////////////////////////////////////////////////////fin totales/////////////////////////////

//fin linea extra de totales


// add onmouseover tr

var numElems=0;


if (numElems>0){

var bgcolortr=$(elemtr).getStyle('background-color');




















$('1535801389_list_table').getElements('img').each( function(elem){



$('1535801389_list_table').getElements('img').each( function(elem){



var toolTips = new Tips($$('.lm_hasTip2'));


function submitAjaxForm1535801389_(param,validate){

// Validar formulario

if (!validate||validateForm1535801389_($('1535801389_list_adminForm'))){


// Guardamos la consulta

$('1535801389_queryString').value = $('1535801389_list_adminForm').toQueryString();

if ($('1535801389_lm_intform')!=null){





// Create form element

var form = new Element('form').setProperties({

action :"index.php",

'id' :'1535801389_lm_intform'


//var code="";


if(validate) eval(arrEditores1535801389_);





if (elemTag=='select'){


elemValue= $(elem).getElements('option').get('value');







} else {

//si el class no es lm_text para evitar el textarea


if (elemTag=='textarea'&&!($(elem).hasClass('lm_text'))){

var str=WFEditor.getContent('xxxx');+"";








var elemTemp = new Element('input').setProperties({










var elemTemp = new Element('input').setProperties({











var myAjax = new Ajax("index.php", {

method: 'post',

data: $('1535801389_lm_intform').toQueryString(),

update: $('1535801389_cb_resultado'),

onComplete : function(){







onFailure : function(err){






var req = new Form.Request($('1535801389_lm_intform'), $('1535801389_cb_resultado'), {

requestOptions: {

//'spinnerTarget': $('1535801389_cb_intform')


onFailure : function(error){alert(error.status+" : "+error.statusText);},

onSuccess : function(){









var req = new Request({


url: '',

method: 'post',

onSuccess : function(){









// $('1535801389_list_adminForm').reset();




return true;


return false;


function ocultaForm1535801389_(){


//resetear textarea





var fin=$('1535801389_cb_form').getStyle('height');


// new Fx.Style($(elem),'opacity', {duration: 1500}).start('1','0');


duration: 1000,

transition: Fx.Transitions.linear,

link: 'chain'


$(elem).tween('opacity','1', '0');



duration: 1000,

transition: Fx.Transitions.linear,

link: 'chain'


$('1535801389_cb_form').tween('height', '0').tween('display', 'none');


new Fx.Style($('1535801389_cb_form'),'height', {duration: 2000,transition: Fx.Transitions.Elastic.easeIn}).start(fin,'0').chain(function(){

$('1535801389_cb_form').setStyle('display', 'none');



function showForm1535801389_(){

if ($('1535801389_cb_form').getStyle('display')!='block'){

$('1535801389_cb_form').setStyle('display', 'block');

//var fin=40*arrCabeceras1535801389_.length;

var fin=altoform1535801389_;

//$('1535801389_lm_message').set('tween', {duration: 1000});

if ($('1535801389_cb_form').getProperty('height')==null){


//new Fx.Style($(elem),'opacity', {duration: 1500}).start('0','1')

// $(elem).tween('opacity', '1');


duration: 1000,

transition: Fx.Transitions.linear,

link: 'chain'


$(elem).tween('opacity', '0','1');


//new Fx.Style($('1535801389_cb_form'),'height', {duration: 2000,transition: Fx.Transitions.Elastic.easeOut}).start('0',fin+'');

//$('1535801389_cb_form').tween('height', fin+'');


duration: 2000,

transition: Fx.Transitions.Elastic.easeOut,

link: 'chain'


$('1535801389_cb_form').tween('height', '0',fin+'');




function setPorpag1535801389_(){


var val = parseInt(str);

if(isNaN(val)||val==0) val=10;






function showAll1535801389_(){

var totalrecords= parseInt($('1535801389_pagtotales').value)*parseInt($('1535801389_porpag').value);




window.addEvent('load', function() {


$('1535801389_porpag').addEvent('keyup',function(e) {


str = str.replace(//g,''); // remove everything except the


if (e.keyCode == '13'){




$('1535801389_porpag').addEvent('blur',function(e) { setPorpag1535801389_();});

$('1535801389_porpag').addEvent('change',function(e) { setPorpag1535801389_();});

$('1535801389_cb_form').setStyle('display', 'block');


$('1535801389_cb_form').setStyle('display', 'none');

$('1535801389_btadd').addEvent('click',function(e) {





$('1535801389_queryString').setStyle('display', 'none');

$('1535801389_exportpdf').addEvent('click', function(e) {




return true;


$('1535801389_exportexcel').addEvent('click', function(e) {




return true;


$('1535801389_saveform').addEvent('click', function(e){



$('1535801389_cancelform').addEvent('click', function(e){



$$('#1535801389_list_adminForm input').each(function(el) {

el.addEvent('keydown',function(e) {

if (e.key=='enter'){








window.addEvent('load', function() {

document.formvalidator.setHandler('elem22', function(value) {


if (!regex.test(value)){

alert("Value must be numeric");

return false;



if (!patron.test(value)) {

alert("Value must contain 0 decimal(s)");

return false;


return true;



window.addEvent('load', function() {

document.formvalidator.setHandler('elem23', function(value) {


if (!regex.test(value)){

alert("Value must be numeric");

return false;



if (!patron.test(value)) {

alert("Value must contain 0 decimal(s)");

return false;


return true;



window.addEvent('load', function() {

document.formvalidator.setHandler('elem24', function(value) {


if (!regex.test(value)){

alert("Value must be numeric");

return false;



if (!patron.test(value)) {

alert("Value must contain 0 decimal(s)");

return false;


return true;









Export to  

Export to  

Monday the 14th.

Custom text here

Copyright 2012©

Site by Graphical Constructions

var pkBaseURL = (("https:" == document.location.protocol) ? "" : "");

document.write(unescape("%3Cscript src='" + pkBaseURL + "piwik.js' type='text/javascript'%3E%3C/script%3E"));

try {

var piwikTracker = Piwik.getTracker(pkBaseURL + "piwik.php", 6);



} catch( err ) {}

Moonsoft support 2012-05-14 14:42:13


when a user is logged in, he can see all records. Is it possible to configure list manager so that a user only can see his own records?

Kind Regards.

Moonsoft support 2012-05-15 05:09:26


I am having a strange issue with the "send an email" feature and I am uncertain what is causing it. After the formula is calculated the send an email box pops up and when i enter an email address and click send a random error appears.

Sometimes the error is just three numbers like; 901, 121, etc and sometimes its the sum of the form. I does not say email sent or anything like that - but heres the storage in it all, the email does get sent.

Here is the code that I am using for cubic weight calculator, figured I add this just in case something was wrong here:

if ($actual > $cubic)
echo ($sum=$actual);
echo ($sum);


Moonsoft support 2012-05-15 21:50:19


your component runs great, except when I try to save a record within IE. When I click the save button, nothing happens. Do you have a solution for that?

Kind Regards.

Moonsoft support 2012-05-17 20:53:32


is there a way to change the color of the text balloon that show up when you go with your mous pointer over the 'add' button?

I can't find it by myself in the css. Do you have a hint for that?

Kind regards,

Davy Conaert.

Moonsoft support 2012-05-18 04:38:49

I bought LM a few days ago and initially had problem installing. After installing, I found the setup rather easy. But when I tried to set up the front end to view, it came out blank.

I am using Joomla 1.5.15 and I realized that there have been some postings on the same issue for other Joomla version.

I am not sure if the issues are the same but I did expect everything to be easy to use as I read the initial reviews and thought so.....I guess I was wrong.

Hope someone can assist as the idea behind this is really good but unfortunately, for me, the error is a major one since it cannot even be visible in the front end.

Moonsoft support 2012-05-18 13:09:04

The progress bar is showing NaN% no matter what numbers are added.

Moonsoft support 2012-05-20 10:20:47


I'd like to change the word 'Add' in 'Toevoegen'. That is the dutch word for Add. Is there a file that I can customize? I'd rather like to translate everything in dutch if that is allowed of course.

Kind Regards,


Moonsoft support 2012-05-21 06:19:26

Dear Support,

Thanks for this component. I installed it on my site and its working well. However, I am facing a problem with internet explorer whenever I try to save it says "Some values are incorrect" and it fails to save.

I have discovered that this happens only with internet explorer. I have also found that it happens only when I have a field with type "user"

Could you kindly assist me in making this work with internet explorer too



Edited by moon_504 - 21.05.2012 06:20

Moonsoft support 2012-05-21 07:18:41

Dear Support,

Using list manager, I conducted a search and then exported the results. Unfortunately, the export included all the items in the list and not just the search results.

Could you kindly help in ensuring that only search results are exported when required



Moonsoft support 2012-05-21 07:22:49

Dear Support,

I use the CKeditor component as the default editor for my site because of its advantages.

Using listmanager, I have field of type HTML Editor. However, all items I enter in these fields do not show after saving.

I have howvever, found that they show if the default jJoomla editor is TinyMCE

How can listmanager be made to work with CKeditor so that entries will show



Moonsoft support 2012-05-21 20:03:44

Hi -

I recently purchased the list manager and am trying to include it on my website. I added a menu item a with a link to the list manager component, however when I click on the menu item, I get: HTTP Error 500 (Internal Server Error): An unexpected condition was encountered while the server was attempting to fulfill the request.

Need to launch site in 24 hrs. Please assist.

Moonsoft support 2012-05-22 10:55:23

Dear Support,

Is there any way for adding a field where users can upload a file?



Moonsoft support 2012-05-22 21:39:38


I configured LM so that users can see only there own records in frontend. Is there a way for a SuperAdmin that he still can see and edit al user records in the frontend or is that only possible in the backend?

Kind regards,

Davy Conaert.

Moonsoft support 2012-05-23 22:05:09

Hi at all,
I ask if it's possible to link one of field of record for addressing to site page.

Moonsoft support 2012-05-25 18:44:27

Hi, i bought your calculator component yesterday and i am trying to make it work BUT it seems even with a small calculation like your demo 2 numbers sum, the calculator button does not do anything.

My web site is on a localhost at the moment and i am using the rockettheme PANACEA. (rt_panacea_j15)
though i tried other tempaltes as well and again the calculation button DOES NOT work even with the default joomla template.

I have read the forum and i have seen all the similar topic's but what you recommend to them it seems is not good for my site.

I am including the header of my site so that you can see what i load. (also i have tried to include jquery using the jQuery Includer ( as it is not clear but i also tried to include that just in case it solved the problem .

I really hope you can help.

Edited by moon_515 - 25.05.2012 18:46

Moonsoft support 2012-05-26 16:58:43

I need to import file (pdf or txt or rtf or Html ecc) into a text area field of my site page.
For example I saved an excel sheet selected area in HTML therefore I copied into an HTML area field of Listmanager but It does not work properly. I read in my site page only the its code.
Is there other way I can import also in an automatic manner?
Thank you so much.

Moonsoft support 2012-05-26 23:29:58

I build this sequence:

menu-->ListManager ____page1
|___________page 2
|___________page 3
|.................. and so on.

How can I publish other LM module only onto the pages?


Moonsoft support 2012-05-29 10:23:31

Why using Html field I loss style of my code? I copied a chunk of Html code from excel but in front-end I'm be able viewing well formatted text but no colours.
Can you help me?

Moonsoft support 2012-05-30 21:31:07

Fatal error: Allowed memory size of 268435456 bytes exhausted (tried to allocate 71 bytes) in /storage/content/94/144694/ on line 271

I try to import a large series of records (100 000) but it stops with the error.

What to do?

Moonsoft support 2012-05-30 22:46:50

Hi is it possible to add a URL to a Option list box field?
Thanks for any help

Moonsoft support 2012-05-30 23:28:10

Goal: to grab the calculated total sum("total square feet"), and populating that onto another form(RSform) on another page automatically.

Step 1: My client wants his calculator to look exactly like this:$oGridControllerW&UserForm=SpaceCalculator.ascx&AppModule=ConnectPopups/SpaceCalculator&PostBack=true&WaitPage=true&Title=Space%20Calculator&WaitTitle=Processing%20Your%20Request

Step 2: He wants the total rentable square feet to calculate then automatically grab the information and shove it onto a survey on a totally different page>>> This will make it user friendly for a customer. The survey is actually an RSform, totally different software, but i'm sure the php code is the same in the background right?

Is this possible? Please help.

Moonsoft support 2012-05-30 23:50:36

sorry my error i just found out how to :-)

Edited by moon_531 - 30.05.2012 23:55

Moonsoft support 2012-05-31 12:06:43

i created a section and i want my guests to choose up to 5 products.
The link for my demo version:

First combo box ($cat_1) is an option list and the other 3 (cat_1_link, cat_1_link_link, cat_1_link_link_link) are linked lists.

I have 2 problems:
1)Linked list works only for the first section. When changing option list in sections 2 to 5, all the other linked lists aren't refreshed.

2) How can i calculate which option selected in each section? I am using $cat_1 for the option list to get selected item, but this doesn't work for the 3 linked lists.

Moonsoft support 2012-06-01 19:26:09

Dear support,

How can I get the column lines to be displayed in the PDF export.

This is useful for us to show the separation of data in the different columns



Moonsoft support 2012-06-03 19:46:42

Dear Support,

I have some fields types as HTML Editor. I am using Joomla's TinyMCE as the editor.

The problem is that I cannot save when using Internet explorer. Please help is solving this. Mine is Joomla version 1.5



Moonsoft support 2012-06-05 15:23:10

In my site I'm using Cronoforms. I'm realizing that the modules created with Calcbuilder working perfectly with PHP code no longer work. What can have happened? You can be of help?
Thank you.
Max Monti

Moonsoft support 2012-06-05 21:29:19


I'm having an issue with this formula:

if ($actual > $cubic)

On the site I have a cost calculator that takes the Length X Width X Height - The Actual Weight - and then multiples it by the chosen Rate.

I seems to work accurately with small numbers but when I enter 100x100x100 then 250 (for actual weight) and choose 1.57 per pound on the cost the results are not accurate.

The way this calculation is supposed to work (it does with smaller numbers) is it first calculates the cubic weight LxWxH which in this case would be 1,000,000 then compares it to the Actual Weight which is 250, then chooses the larger between the Cubic weight and Actual Weight and then multiples by the Rate..which is $1.57.

When I click calculate it spits out $9.49 when it should be $9457.84 - now if I take the LxWxH and use say 20x20x20 and 250 for the actual weight and $157 for the rate it calculates correctly at $392.50

I'm not sure why it is doing this...I figured a second set of eyes might see something I'm not.

Moonsoft support 2012-06-06 14:17:30

Dear support,

With the excel and pdf export buttons, the bullets and numbering are lost.

Could you kindly assist by adding a print button so that one can print out the list entries both the entire list or just search result entries



Moonsoft support 2012-06-07 10:13:16

When I click the configuration menu inside Listmanager, I get an incomplete corrupt page. The full admin template does not load up.
All I see is the following, in the top left hand corner, on a white background:

Date Format
Number Format Decimal Format Thousand Format
Pdf orientation Portrait Landscape
HTML before list

Moonsoft support 2012-06-07 14:27:06

Could someone please explain what is going wrong here? I can't get the results nor is the calculate button working here. Also its seems like the PDF / Print button won't work (when selecting the template)

Is there also an option to rename the calculate button etc.?

Moonsoft support 2012-06-09 18:02:29

Dear Support,

For some reason I cannot type anything in fields of type HTML editor using firefox and chrome browser. I am using joomla 2.5.4 and the TinyMCE editor.

Surprising the editor works well with internet explorer. I have also tried this with several defualt joomla templates

Please help


Moonsoft support 2012-06-11 10:45:41

I added the user field to track which user has added a record, however, when a record is added the user field in the view is blank (has no value).

If I choose a user in the backend, it will show up in the view, however when admin add comment or the user update the record the "User" file is blank in the view.

Could you please advise how to fix this.

Edited by moon_541 - 11.06.2012 10:50

Moonsoft support 2012-06-17 15:14:40

I need to put one of a ListManager module on a page that is not attached to any menu, how can I do?
Thank you so much.

Moonsoft support 2012-06-18 18:24:08

How can I remove the edit sign from a list in a page?
Thank you!

Moonsoft support 2012-06-19 13:36:42


I bought LIST MANAGER and when i want export to PDF or XLS with Cyrillic, I have problem.

I get only "???".

Anybody help me.


Moonsoft support 2012-06-21 15:00:52

Is there a way to put the toggle editor in HTML mode by default insted of clicking on the button to switch mode?

Moonsoft support 2012-06-21 17:25:16

I built a table with Calc Builder. When I ask the calculation, I get the following warning: Some values ​​are incorrect.
What it can depend from.
Thank you!

Solved!! my mistake!!

Edited by moon_383 - 22.06.2012 00:15

Edited by moon_383 - 22.06.2012 00:16

Moonsoft support 2012-06-22 00:21:09

Hi at all,
I take two more questions:
1. - After applying for calculating how can I delete the answer you get?
2. - How can I put in a column on the right numbers of a field?
Thank you.

Moonsoft support 2012-06-26 22:16:53

No problem installing the module but I am getting an error message every time I try installing the component.

Nevermind, I got it.

Edited by moon_584 - 27.06.2012 02:47

Moonsoft support 2012-06-29 17:39:37

I want to add the same information that ends up in "show pdf export" into an emailed pdf. I'm having trouble figuring out how to write the code. I tried copy and pasting the html code from the Exit Layout into the area of the PHP code under //pdf text. Am I on the right track?

Moonsoft support 2012-07-02 21:02:40

I can't get the date feature to work. The little calendar pops up, but I am unable to select a date from it. Any suggestions?

Moonsoft support 2012-07-03 14:22:56

Hi is it possible to add some CSS to the INFORMATION box (the box under the listing name in LISTING) I whant to add somme color, link and space to my information texte

Moonsoft support 2012-07-03 18:29:55


We have a date column on our website which is wrapping, making an unpleasant looking display:

Is there any way this can be fixed, or, to hard code a width into just this one field?

Thank you in advance,


Moonsoft support 2012-07-04 05:59:39

Fatal error: Call to a member function isAdmin() on a non-object in /home/tosee360/public_html/business-directory/plugins/editors/jce/jce/libraries/classes/editor.php on line 153


When pressing Form Layout.

Please advise.

Moonsoft support 2012-07-05 05:03:14

when i upload batch information in the admin the HTML field put a (\) symbol beford the (_) symbol in my HTML code for no reason? Can you help me?

Like this

Original code:

<a href=" xclick&hosted_button_id=DUMTYB8Q94SR2" />

After batch upload:

<a href=" xclick&hosted_button_id=DUMTYB8Q94SR2" />

Moonsoft support 2012-07-05 15:47:40

Is it possible to put the LOAD DATA field in the front end with permission set to admin or editor?

I want to be able to paste my batch information in the front end and not log in the backend

Is this possible?

Thank you

Moonsoft support 2012-07-05 16:14:05

Wen i export my data to PDF or XLS the default file name is LISTMANAGER.PDF/LISTMANAGER.XLS I want to change to anything.PDF/anything.XLS how can i do that? thanks

Moonsoft support 2012-07-06 02:00:42

When i check the box to select all my data it dosent do anything...When on roll over on the select all check box it say JGLOBAL_CHECK_ALL.... in my joomla site its working not working only in the listing data page... Can you help me?

Moonsoft support 2012-07-06 14:13:55

How to dissable tooltip in the listemanager front end?

Moonsoft support 2012-07-06 17:18:52

Hi all,

I have implemented ListManager for a list of books. I have used the Load Data screen to load more than 500 records. The data is showing on the frontpage but on the admin page I can only see the first page (for ex. 20 records). If I change the number of records or click on the navigation buttons (next page) I see a blank page and no fields on top. Also the search function is not working.
It is clearly a bug, I hope you can help me with this.

If you need to reproduce the error, I can give you access to the administration or send you some screenshots.



Moonsoft support 2012-07-07 15:11:17


Documentation says, we can find CalcBuilder in Module Manager. But I can't find it there. What can I do?

This is my system configuration:

PHP Built On Linux wp172 2.6.37-he-xeon-64gb+1 #1 SMP Thu Feb 17 09:41:57 CET 2011 i686
Database Version 5.5.25-1~dotdeb.0-log
Database Collation utf8_general_ci
PHP Version 5.2.17
Web Server Apache
WebServer to PHP Interface apache2handler
Joomla! Version Joomla! 1.7.3 Stable 14-Nov-2011 14:00 GMT
Joomla! Platform Version Joomla Platform 11.2.0 Stable+Modified 27-Jul-2011 00:00 GMT
User Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:13.0) Gecko/20100101 Firefox/13.0.1


Moonsoft support 2012-07-07 19:21:26

Is there a way change the Calculator button to say other things like, "submit" or "qualify", etc?

Moonsoft support 2012-07-07 23:22:09

I have two calculators built and I'm trying to figure out a way to have a set of pre-qualifying questions, and depending upon the answers, would send the user to one calculator or the other. Do you have any ideas on how I can do that?

Moonsoft support 2012-07-10 13:09:31


Can I download exemple in demo listmanager, so I can undestand what's happen with differents list.

Possible ?

It's possible to trnaslate listmanager in french ?

thank you


Moonsoft support 2012-07-10 14:27:37

Hello Moonsoft team,

I have a problem with last version to ListManager 1.0.1. In frontend, I cannot edit or add item. I create a new joomla website version 2.5.6 and you can see and check with this link

Best regards.

Frédéric Mégrier

Moonsoft support 2012-07-10 21:58:52

Dear Support,

I have used listmanager to create a tool where users can input data of numerical type and I have selected "YES" for the "Show totals" option. However, when I export to pdf or excel, the totals are not being exported along and it is very useful for us that the totals are exported along

Could you kindly assist on how we can have the totals also exported along with the data.

I have done this using joomla 2.5 and using listmanager version 1.0.1

Looking forward to your assistance


Moonsoft support 2012-07-10 22:22:51

Is there a way to increase the size of the calculate button?

Moonsoft support 2012-07-11 11:22:17


I'm working on Print Preferences Layout and want to access the names of some Multivalues.

For values it would be the ##value## option that gives me the result of the corresponding value, but how do I pass its name?


Edited by moon_602 - 11.07.2012 11:27

Moonsoft support 2012-07-12 21:16:31

Hi I have installed Calculator and "First steps: Adding two numbers" Example Calculator. After this I am pretty lost. I go to Components and select Calc Builder, click on Simple Calculator (That I have installed), what do I do next and is there a test area where I can actually see the changes I made?


Moonsoft support 2012-07-13 17:13:48

Is it possible when the user clicks the calculate button that the results can be displayed in a pop-up window? If so, what do I have to do to do this?

Moonsoft support 2012-07-16 03:03:14

I have a directory I am using your software, listmanager, to manage. I purchased the 0.3 version and recently discovered the 1.X version. Per your instructions, I exported the directory (almost 1500 entries), uninstalled the old, installed the new, and imported the data. Unfortunately when I imported the data, nothing appears when I view the directory from the front-end. The back-end shows the data. I removed the menu, re-created the menu, and several other things; but could not get the directory to appear. I opted to create a second directory with the same layout, which has 11 fields/columns. As I was manually entering the records, I noticed the directory was showing the records on the front end. I attempted another re-import. I was refreshing the directory on the front-end while the data was being imported and I could see the listings grow. When the import finished, the directory no longer showed on the front end. I began deleting 20 rows from the back-end. I deleted about 60 rows and noticed the directory appeared on the front-end. I began manually entering the deleted 60. I think I manually entered about 30, refreshed the front end, and the directory no longer appears. I went back to the back-end and deleted 40 rows and the directory has re-appeared. The data I am entering is nothing unique--i.e. name, street, city, state, zip, country, phone, E-Mail, web, and fax. The only thing I considered was a limit of your software.

Any help would be appreciated.

Moonsoft support 2012-07-16 14:37:51

Hello, i paid for the component and for some reason everytime i try to download it, i don't seem to get the zip file, instead i get a blank html page. How can i get to the zip file. The client really needs this calculator like immediately as they have paid for it.

Moonsoft support 2012-07-16 14:53:14

Linked List: Name=12 months Value=A1_678

Please tell me how to get 678?

Moonsoft support 2012-07-19 19:04:03

I want to export the statisics to excel.

Preferably, I'd like to find a way to have the statics automatically emailed to me daily.

Any suggestions?

Moonsoft support 2012-07-20 09:34:02

Here is the solution to add an email validation to one of your form fields, which you have typed 'text'.

Go to javascript events, and write this:


Where 'x' is the field ID (from fields and code tab).

Moonsoft support 2012-07-23 13:09:37

Estimados Sres.,

DEspués de instalar el componente, no puedo ver otras calculadoras como la de amortización o envio...

¿debo instalar algo adicional?

muchas gracias.

un saludo.

Moonsoft support 2012-07-29 00:05:55

I just bought LISTMANAGER and installed it on a Joomla 1.5.26 site. I set up a list in the component, and then enabled the module and attached the module to one of my pages. When I go to the page, I get the heading of the list, but the data for the list shows up in a popup dialog, with text of the following:

Moonsoft support 2012-07-29 05:51:05

Fatal error: Call to a member function children() on a non-object in C:\inetpub\wwwroot\entrustedmail_1\administrator\components\com_calcbuilder\models\utility.php on line 440

Moonsoft support 2012-07-31 21:51:56

My calculators have been working great but I just noticed one major flaw. If the user types in a comma in the number (for example 1,000,000), it's recognizing that number as zero. How can I fix that?

Moonsoft support 2012-08-01 18:55:52


I have one question, hopefully you have faced this before. Is it at all possible, for when the user clicks the calculate button, the form layout hides as the exit layout shows, and when the reset button is clicked, the form layout is displayed again?

kind Regards,

Moonsoft support 2012-08-04 11:57:34

Is there a way to create a date field but fill it automatically (not by the user) with a date stamp when a user add an new entry instead of having the user using a date picker manually to fill it.

The goal is to have a field that I can sort on that is based on the date on which an entry is created.

Moonsoft support 2012-08-04 20:45:59

Cant install

get message "There was an error uploading this file to the server."

plz help

Moonsoft support 2012-08-05 18:04:14

Is there a way to make the page scroll down after pressing calculate?

Moonsoft support 2012-08-06 10:48:47

I want to create quick guides list but i have some problems.

Please check it

I have css problem i think.

Please help me (Sory for my English)

Moonsoft support 2012-08-06 17:04:02

Is it possible to generate a sequential number field ie 1000,1001,1002

Moonsoft support 2012-08-11 15:28:00


how can I load data from database tables into lists?

Best wishes,

Moonsoft support 2012-08-11 18:59:58

Is there a way to have the form list the fields without a break?


Now it shows:

First Name
(fields are broken now)
Last Name

I would like it to show:

First Name Last Name (without a break)

Moonsoft support 2012-08-12 06:57:21

MY hosting company installed an SSL certificate on my website. All of the calcbuilder modules are not working on the https website. They still work fine on the http website. Any suggestions?


Moonsoft support 2012-08-13 04:13:05

Sometimes the calculate button shows up centered and sometimes it aligned to the left. Is there a way to control that?

Moonsoft support 2012-08-16 18:14:07


we recently bought your software Listmanager.

please give us a way to disable the last column. we don't use that last column.
we already searched and tried the solutions purposed in forum.

Edited by moon_658 - 16.08.2012 18:14

Moonsoft support 2012-08-21 09:36:43

Is it possible to imbed a calculater into a "Blue Flame" form as a module?

Moonsoft support 2012-08-22 03:48:40


Is it possible to associate multiple options with one name?


I have name and committee the person serves on. I have people that serve on more than one committee and when I create a view would like to have them show on both views?

Moonsoft support 2012-08-22 11:09:37

Dear Moonsoft,

I would like know if possible to create a list with other table. I use composant "community builder", I would like create users list with ListManager. It's possible to create field with SQL requet?


Frédéric Mégrier

Moonsoft support 2012-08-23 17:07:05

By default in my front end it shows 10 list items i whant to know how can i put 0 result by default and result apper only wen i start typing in the search box? thank you

Moonsoft support 2012-08-24 11:47:00

as we have received during last days several questions about slider
integration with fields of calcbuilder, here you have instructions to
make a third party js library work together with number or text fields
(many thanks to Keith for sharing the final solution).
The library can be found here:

You should download the slider control and upload/include the script
libraries and styles (codebase folder), adding them to your template and
setting the right paths, insert inside a script tag:


And import the following js files:


Also include the stylesheet:


Then use the 'Javascript events' tabs at calcbuilder to link the fields.
It executes on onload event, so all fields are already present at the page.
To identify each input field, please check the 'fields and code'
section, to find out the ID number of the field you want to link. The
html id of each field would be


where 'x' is the ID number. Then use that identifier to link the slider,
for ex, a text field with ID=8 :

var sld1 = new dhtmlxSlider("fld_wrapper_8", {
skin: "dhx_skyblue",

Hope this helps, regards

Edited by MSTeam - 24.08.2012 11:56

Moonsoft support 2012-08-28 19:44:40

Can the results table have a $ sign in front of certain fields and % in front of others?

Moonsoft support 2012-08-29 15:11:38

I have what I thought was going to be a simple calculation but can't work out how to include it in to Calc Builder. As I said it is simple and I am sure that the answer is simple.

I want a visitor to be able to enter a value (no decimal) - No problem create a field

I then want to take that value and divide it by a constant (85,000) = A

I then want to round the result up to the next whole number (I would add .99 and then drop anything after the decimal point) = B

I also need to divide the result 'A' by a constant of 2 and then round it up to the next whole number.

The result are to be displayed in a column fashion (I think I have this sussed)

Calc one = Round down((amount/85,000)+.99)
Calc two = Round down(((amount/85,000)/2)+.99)

Moonsoft support 2012-09-04 00:14:27


I'm trying to do a calculator, and all it's ok, but the only problem that I have, is when I try to write a negative number, in this case, the program says that I need to put a correct number (with a positive number, function correctly). Does someone knows what could it be the problem??
thanks in advance!

Moonsoft support 2012-09-04 21:17:50

When you see a module-list of plugin-list in Joomla, the background switches each line (white, light blue, white, livht blue, …)

The Listmanager is all white.

Is there any possibility that we can do the same type of background?

If you have a long or wide list, it’s easier for the viewer to read the line with info.

Moonsoft support 2012-09-07 23:21:32

My table listing shows with a very tiny font that is unreadable.

I found the CSS file in modules/mod_listmanager/assets/css/default.css

Could you point to the css selector that controls that?


Moonsoft support 2012-09-14 04:42:29

2 quick questions...
1. On the bottom of the results table there is the "export to" pdf or excel. The text and icons are very small. I was able to make the pdf and excel icons larger but couldn't find where to edit the "export to" text. I wanted to change the actual wording to "export as pdf or excel; Click on the following icons" or something like that

2. We have created a custom financial calculator with a lot of variables. It would be great to be able to add a popup javascript event when you hover the mouse over a field that says something like "enter $125,000 for example" or "ie 15%"

This is an awesome component with great customer support

Moonsoft support 2012-09-17 15:07:45

Hello, thank you for such a good tool. It works great. I have just small issue with large numbers = comma does not show up after 3 digits. I set "Frontend Number format" in preferences, but when I fill form click on calculate, numbers show without commas. Could you please help me? Thank you

Moonsoft support 2012-09-19 12:32:32

I have created a couple of calculators for a site but my client would like to output a text line rather than the normal output when one of the results is negative.

I had a quick look at the 'Javascript events' but I am not sure if this is the area where I should be looking.

I see that in the guide there is a 'Ship costs' calculation that used Java but I can't find it to download and look at.

Thank you for a great component.

Moonsoft support 2012-09-20 12:41:35

Hi there,
Sorry, but probably a NooB question:

I downloaded the matrix example, but cannot install it. I am getting:

The website encountered an error while retrieving It may be down for maintenance or configured incorrectly.

HTTP Error 500 (Internal Server Error): An unexpected condition was encountered while the server was attempting to fulfil the request.

The other examples did install successfully.

Any help will be appreciated.

Don't know if there are any other place where the matrix example is documented further or how to lookup values in a table to do calculations. I am looking at calculating unit prices and installation prices based on options the user selects.


Moonsoft support 2012-09-22 02:04:40

Hi my calculators work fine on our regular URL but not if you go to the www URL. Do you have any suggestions?

Moonsoft support 2012-10-03 13:14:59

search box appears, but does not work.

The List Manager Quick Guide says:

Searchable-Searchlink: Used with search plugin. If the list is marked 'searchabe', the search plugin will search inside list manager tables to locate the link.

Where do you mark the list 'searchable'?

Moonsoft support 2012-10-05 15:20:23

Hi there,

I hope you can reply me ASAP as i am in a rush to finish this.
My web is:

Could you please guide me how do i get all the information from what they fill in including name, package detail to my email instead of just the total result? Currently in preference i have request to send an email of result to my email but it is only the result i received. How do i get calcbuilder to email with the break down detail and result?


Moonsoft support 2012-10-13 19:27:45

In fields and code section, in php code, I try to get url param, but it doesn't seems to work.
For example : $_SERVER doesn't show param, and $_GET) show the ID of my homepage (instead of the ID of the page where my form is).
How can we get params from url within this php code section ?
NB : url of the page where form is published is index.php?option=com_community&view=groups&task=viewgroup&groupid=24&Itemid=581&lang=fr and I would like to get "groupid" param.

Edited by moon_740 - 13.10.2012 23:44

Moonsoft support 2012-10-14 19:21:11

When I clic on "reset" button on my form, input fields are reset but not output form.
How can I hide output form when user reset the form ?

Edited by moon_740 - 14.10.2012 19:21

Moonsoft support 2012-10-15 20:49:32

I am using Joomla 2.5.7 and ListManager 1.1.0. I have checked the forum and it suggests at


...that I have a JScript conflict. The check was to change the template back to the default, which I did, but this did not clear the error, thereby suggesting another problem.

Can you help?

Thank you - select Matches from the topmenu. thanks

Edited by moon_272 - 15.10.2012 20:58

Moonsoft support 2012-10-18 21:06:19

I have several problems with calcbuilder form layout at bottom right of this page :
- I would like to hide title of calcbuilder. How to do that ?
- reset button has not the same layout as calculate button (see "réinitialiser" ),
- Yes/No button appears on 2 lines (when you clic on "impots sur le revenu" in the drop list).

Could you help me to solve this problem ?

Form layout code :
<div style="margin-bottom: 20px;">
<div style="vertical-align: top; border: 0px; text-align: left;">Calculez l'économie d'impôts que vous pouvez réaliser avec vos dons</div>
<div style="vertical-align: top; border: 0px; text-align: left; width: 100px; padding-top: 10px; float: left;">Votre don (€) :</div>
<div style="vertical-align: top; border: 0px; text-align: left; padding-top: 10px;">##don##</div>
<div style="vertical-align: top; border: 0px; padding-top: 10px; padding-bottom: 20px;">##impot##</div>
<div id="opt1" style="display: none;">
<div style="vertical-align: top; border: 0px; text-align: left; display: inline;">##select_opt1##  Le bénéficiaire est un "organisme d’aide aux personnes en difficulté"</div>
<div style="vertical-align: top; border: 0px; text-align: left; display: inline;">Le bénéficiaire est un "organisme d’aide aux personnes en difficulté"</div>

Moonsoft support 2012-10-20 15:47:05

My new calculator works perfect when using Google Chrome, no problems. However, when I use the latest version of Internet Explorer or Safari (iPhone 3GS) I get error messages. With IE, I get 'error on page, with no results. With Safari I receive error message "0 :" Can you please tell me what I'm doing wrong?

Moonsoft support 2012-10-24 19:56:50

I need to know how I can simplify the top bar, I only need the search box but not the next/previous or "show all" buttons - how can I remove them? I just want a simple searchable sortable list that limits results.

I am using the Module for display in front end for I'm getting an error when using the component for display.

Any help would be great.

Edited by moon_765 - 24.10.2012 20:33

Moonsoft support 2012-11-03 21:44:47

hy, y have some problems with the component. I make changes in the backend but in the front doesn't appear. I try with an exemple from with your page but the result is the same. I reload the page from another computer but the same. I try to change the "sum" it doesn't change. what am i missing?? how can y do some chenages? when the changes appear?

Edited by moon_777 - 03.11.2012 22:28

Moonsoft support 2012-11-05 16:59:18

Good Morning,

My calculator is working well but it is not centered in the middle of the displayed module. The entire thing is shifted to the right.

Any suggestions?


Moonsoft support 2012-11-10 14:38:59


New to calc builder but not to Joomla

Cant get it to work on a live site so I installed j1.5.26 on a test site

Installed moonsoft tester and get these results

Init test -> Javascript
Mootools version:1.2.5
jQuery version:1.4.2
Init test -> Server/PHP
PHP version 5.2.17
POST Max size: 10M
Upload Max size: 10M

installed the com_ and mod_ of calc builder
imported the simple calc from the downloads page
Fields show, calc button shows but nothing happens (No output)

If i use a letter or decimal i am warned so something is working on the page

but still no output

Test site



Moonsoft support 2012-11-14 18:13:19


This component is very well !
But, i've a question : it's possible to import a CSV file from front-end ?

Thank you !

Moonsoft support 2012-11-14 19:00:50

I've Another question, sorry ;)
It's possible to change order of fields in view ?

Thank you !

Moonsoft support 2012-11-15 10:17:16


I need more information this. Inside an article you should use {loadposition XXX} where XXX is the custom position(1) we have defined for the module. How i can find XXX ?

Moonsoft support 2012-11-20 16:23:41


The CSS-file I'm trying to edit for the layout is at: /modules/mod_listmanager/assets/css/default.css
I hope this is the right one.

I found in some other topics, that I have to edit .lm_trblack en .lm_trwhite to create difference in colors for the result-lines.

In my test-case its now:
.lm_trblack {
.lm_trwhite {

but the result is a full white background, without any colors.

For some reasen, at +/- line 173 I have ".lm_list_table{"
Is it normal that there is a "/*" before that ?

Also, where can I find the CSS-part to edit the fontsize of the titels of the colomns?

preview of my table:

Moonsoft support 2012-11-20 16:52:43

I removed my previous installation and setup a whole new table.
Now I'm using version 1.1.1 for Joomla 2.5

I've setup the table, enabled the component but I have blank page.
When I go to the table properties, and want to see a previeuw, it's fully loaded with data. The preview in the component is ok, the output on the front-end is blanco.
Even when I press 'show all' it's empty

Also in the Module Manager: Module mod_listmanager, under the "List Manager View Options" I've set the both email-fields to NO.
When I look at the front-end, there is still a emailfield under my (blanco) table.

Moonsoft support 2012-11-29 02:54:42


I get always following error when clicking on "manage data" in backend:
Fatal error: Call to undefined method JDatabaseMySQLi::loadColumn() in /administrator/components/com_listmanager/models/listing.php on line 554

In Frontend I get following error:
Fatal error: Call to undefined method JDatabaseMySQLi::loadColumn() in /components/com_listmanager/models/serverpages.php on line 799

Can you help?


Moonsoft support 2012-12-02 15:28:38

Hello. How do I upgrade ListManager from 1.1.0 to 1.1.1. without losing all my data?. I have found only the full download. Thankx

Moonsoft support 2012-12-05 14:44:23

The list display is stuck on "loading" when a field contains an apostrophe, for example in french: l'itinéraire

Thank you !

Moonsoft support 2012-12-06 13:02:32

I want to make in the list in a column / cell a link to a file. This link should be rendered as PDF file. Furthermore, my system 2 is speaking.

1) my field is set to "HTML editor"

2) <a href="../datenblatt/test.pdf" target="_blank">
<img src="../images/pdf-icon.gif" border=" " />
In the front end, the images are not displayed.

3) <a href="../datenblatt/test.pdf" target="_blank">Download</a> (without image)
When download link is error
- (Http://localhost/Jommla170/de/Datenblatt/test.pdf)
- 404 - category not found

- I will take away the "de", the download works
- (Http://localhost/Jommla170/Datenblatt/test.pdf)

Can you help me??

I send a couple of them could also Screeshots

Edited by moon_822 - 06.12.2012 13:04

Moonsoft support 2012-12-06 13:51:54

Where does User Name for a particular record created in the component stored? I am developing a form and wanted to access the TABLES to get the records associated for a user? How to do this?

Also, i wanted 2 custom fields which i know i can create and NOT exhibit in the form. But these custom fields should be populated by my logic which will be stored in my SESSION variable. How do i do this?

Thanks for your quick response and support.


Moonsoft support 2012-12-07 19:20:58

If I leve scjquery disabled CalcBuilder does nothing and gives a system message (sort of a pop-up window) that says "Internal Server Error" on evaluation.

If I enable scjquery it gives on evaluation the following error:

Fatal error: Call to undefined method JDocumentRaw::getHeadData() in /home/funwiths/public_html/plugins/system/scjquery/scjquery.php on line 84

How can I fix this?

Moonsoft support 2012-12-10 06:01:50

How do I display my list on the Front End? I created it, but when i linked it through Menu, it just shows Search and not the list.

Thank you

Moonsoft support 2012-12-10 21:35:20

On this code

$result='<table><thead><tr><th>What</th><th>How much</th><th>Cost</th><tr></thead><tbody>';
$result.='<td>'.$howmuch.' m€</td>';
$result.='<td>'.$matrixlist."] *$howmuch.'</td>';

i'm getting only the first character in my first section , second char in my second section and so on

how can i get $what_linked to extract the exact value from matrix es. T1_S1 insted of T

Moonsoft support 2012-12-11 11:15:05

I have just purchased List Manager. I'm running a Joomla 2.5.8. Before installing the component I installed and published in a position at the home page the module Moonsoft Tester. However, the page displays for a second and then goes blank, going into a state that seems to be loading endlessly.
Before I install Lm, could someone help me in this issue?

Moonsoft support 2012-12-12 05:05:48

Setup the Module for List Manager, connected to menu item and it would display table but not the data entered (5 test items) It would have a circle spinning that indicated loading but would never load. Tried making a menu item that was just a List Manager menu item and then linked the List Manager module to that menu item and return a 500 error. Been playing with this and reviewing forum for about 6 hours with no positive results.

Moonsoft support 2012-12-12 11:28:50


when creating a new record or edit appears a window with Cancel or Save. Next I see no fields.

can you help me?

Moonsoft support 2012-12-12 20:20:21


how can I hide the detail button (LM_DETAIL_TOOLTIP)

thank you!!

Moonsoft support 2012-12-13 09:58:58


I've created a link in the backend
<a href="Datenblatt/Maschine.pdf" target="_blank">Download</a>

I open the link in the frontend in HTML mode, it looks like this:
<a href="" target="">Download</a>

I then save the record, the link will be destroyed
<a target="">Download</a>

I hope they can help me!!

Thank you

Moonsoft support 2012-12-17 12:52:20


I have built my calculator and i've enabled "Show send by email?"
but when i enter an email and click on "send by email":

- an alert window pops up with the html code of the "exit layout" of my calculator
(eg: <table border=" " /><tbody /><tr /> etc.)
- and the email is not sent

any ideas why?

Moonsoft support 2012-12-17 13:26:44

I purchased and installed Lm. However I see that the component is in English. I cannot see a Spanish version nor language files anywhere at moonsoft's page. Does a Spanish version exist?

Moonsoft support 2012-12-17 22:38:46

I'm running a Joomla 2.5.8 with Brightfuture Joomlage template. My list displays Search Pannel correctly placed within the front-end component area. However, both Filter and Field titles rows extend beyond this area, hidding behind my module positions in the right-hand side of the page, and showing a scroll bar at the bottom.
Youcan see this at

Any help?

Moonsoft support 2012-12-20 17:09:24

Is there a way to add a captcha to the form?

Moonsoft support 2012-12-21 13:33:47

Hi there and sorry to bother.
I'm working with CB and I find it very useful. My problem is that I'm italian and, in our language, the apex is very much used.

I have a textarea for my customers, and if they write in it a string without apex, there's no problem. Otherwise, they get a 500 html error.

I tried
str_replace("'", "-", $note);

but it doesn't work.

But, if I try

str_replace("a", "-", $note);

it works...

Any advice?

Moonsoft support 2012-12-24 01:48:00


I'm having a little issue. I have CB inserted into an article but I cannot see the numbers i put in the field unless it's highlighted!!!!! How can I correct this?

I have other questions but will start a new thread or is it ok to put it in the same thread??


Moonsoft support 2012-12-24 16:39:31

Ho do I create a list and place it in alphabetical order?

Moonsoft support 2012-12-26 12:00:59

Hi, after install component and publish listmanager modules i can't shown the details button in each row, i'm looking for the parameter for activate it in the "configure access control" option, but i check the detail item for all category users but in my site don't shown the detail button, please help me. The url of listmanager module in my site is:

Best regards

Edited by moon_848 - 26.12.2012 12:03

Moonsoft support 2012-12-29 22:44:48

We just upgraded to 2.2. When I try to save changes to a calculator, clicking "save" or "save and close" takes me to the Joomla control panel and no changes are saved.

Moonsoft support 2012-12-31 03:29:18

I'm trying to understand this code I grad from your "Estimate business card" example. Can you please explain this?:

for ($i = 1; $i

Moonsoft support 2012-12-31 23:29:32

I have extracted a rate table out of a spreadsheet into an exported xml calc. Made sure the syntax and formatting is correct. Reason for doing it this way is that there are over 2000 multivalues that need to go in there, impossible to do it manually so I created a macro to convert the data.

When I try importing final calc into Joomla it goes into a blank screen and wont complete the import. Please advise how else it could be done or is Calc Builder unable to import fields with a few thousand multivalues?
I can email you the file I'm trying to import so you can look at it.

Moonsoft support 2013-01-02 05:44:07

I get an error message anytime an apostrophe is entered into a text field. the calculation still comes out accurately, but the error message comes up first.

Moonsoft support 2013-01-02 20:03:43

As your demo (Dictionary:, could you instruct me how to have the details viewable? On my site we intend to display / list some data within a table, but one of the columns would have the detail link, to showcase a description (within the pop-up).

Moonsoft support 2013-01-03 22:57:03

I just installed List Manager and am in the admin area, about to create my first list. I clicked the "new" button and got a mostly blank page with the error:

Fatal error: Call to undefined method stdClass::onDisplay() in /data/24/2/155/9/2318987/user/2546929/htdocs/rev/libraries/joomla/html/editor.php on line 459

Suggestions? I know I did turn off a few plugins earlier today, but thought I had all of the standard ones turned back on. I do not know if a disabled plugin is the issue, but thought someone here with more experience would be able to look at the error and help me out.


Moonsoft support 2013-01-07 03:08:22

Hello is their a limit on how many lines can be forms for calc Builder???

I'm putting together a cost cal for the IRS form 1040 its about 71 lines and I'm trying to add options to it but keep getting this error everytime I save:

The website cannot display the page

HTTP 500

Most likely causes:
•The website is under maintenance.
•The website has a programming error.

What you can try:

Refresh the page.

Go back to the previous page.

More information

This error (HTTP 500 Internal Server Error) means that the website you are visiting had a server problem which prevented the webpage from displaying.

For more information about HTTP errors, see Help.

What is this?? Will this hinder me in getting this done.


Moonsoft support 2013-01-09 17:55:08

I need help with the calculation. I need to have the product between Prezzo and Qta as totale (for several voices) then I need to calculate the global total.
So I have these fields:
Voices, Price, Qta, Total(Price*Qta)
and then the global Total.
The Price values are defined by the administrator of the site, the qta are input by the user.
The form should be like a table with four colums and the Global Total as final calculation.
May you give me some advice?
Thanks Marco
If you want you can contact me at

Edited by MSTeam - 09.01.2013 18:16

Moonsoft support 2013-01-13 23:03:33

I;m looking to have a signup/subscribe form with mailchimp right after a the results of a calculation. However, I tried to input the html code in the form exit tab and when i did that i receive an error. So is there a way I can do this/???


Moonsoft support 2013-01-17 12:25:48

Hi there,

I would like to ask which mootools function that are not in the core file, but in the "more" file, are used by this extension, since I would like to make my webpage as slim as possible and only provide the mootools functions really needed.

Thanks for your reply!

Moonsoft support 2013-01-18 16:01:58

Dear Support,
i´ve several problems: When i compare the look of the extension, f.e. under page 6 of the quickstart guide:

Then my extension looks wrong and different. I´m missing the code tips on the left (where can i upload a screenshot?), I cannot decide between "Fields" and "Code", there only a combined "Fields and Code"-Link.
Under Preferences i cannot set a name for result button, which is also not showing up, when i´m doing the first example´, the num1 and num1 fields are working fine, also "reset"-button is there.

The installation of the extensions worked fine without problems, also the installation of module was without problems.

Any ideas?

Moonsoft support 2013-01-19 17:24:26

Hi all,

I would like to change in the table from type "Yes/No" the symbol "Y" to an image (or at least to another text). How can I do this?

Thanks for your help!

Moonsoft support 2013-01-19 17:31:08

Hi there,

Is a new German package for LM 1.1.1 in development? Since the language file for 0.0.3 misses many important language variables!

Moonsoft support 2013-01-23 16:03:06

Great component! Love how flexible it is :)

Question about the Search within the header row. Is there an easy way to 'pre-populate' it with a search term?

I.E. take your example here:

How could we change it so the page comes up with 'wall' in the search box and then the results below. I know we could build a list view for each, but we have several dozen and also wanted to allow user to search for other results too.

See here:

Edited by moon_858 - 23.01.2013 16:03

Moonsoft support 2013-01-23 23:17:18

I've installed Calcbuilder 2.1.1 on Joomla 3.0, everything works right, but I cant set module class suffix for my calculator, because there is no field of module class suffix.

Edited by moon_362 - 24.01.2013 11:04

Moonsoft support 2013-01-23 23:58:20

Since the Joomla Search with your plugin only lists the view the search result is located, how can we separate the AJAX search from the table header and locate it within a true module position (i.e. Left) and then let it render the data view with the results?

So it would look like below in the left column: Ref -->

and then would pull up the page with the search results there.

Thanks in advance for the help :)

Moonsoft support 2013-01-24 12:48:01

There was a field "Size" at Calcbuilder 2.0, but I can't see it at Calcbuilder 2.1 on Joomla 3.0. Tell me how to set input field size in calculator forms.

Moonsoft support 2013-01-25 19:48:27

How can I have the header of my table properly displayed? See table developed at:

You will note that the search, show, show all and pagination sections are not properly displayed as in your demo. It seems the height of the row is a bit higher than normal. Can you tell me how to correct.

Moonsoft support 2013-01-25 21:23:44

When I try to enter any Russian character, it replaces it with "?" in any field (Name, Description, Pre-form HTML...). How to fix?
Joomla 2.5 and last Calc Builder version.

Moonsoft support 2013-01-27 22:14:16

Hi, I am wondering how to adjust the column widths when the list view is on my website, I seem to get the icons at the end 'Edit' 'Detail' and 'Delete' rolling over onto the next line. If I can make the column widths shorter on my other columns then that would make sure they're all on the same line.


Moonsoft support 2013-01-28 14:50:38

I have two questions:
1) How can I change column order in View?
2) How can I set the order of items by field "Id" (I don't create this field, it is automatic create). I need descending order by "Id".


Moonsoft support 2013-01-28 15:16:55


I can't edit my HTML fields when I edit or create an entry from the front-end.
If I change the field to text or textarea, no problem but with HTML all I get is a blank field.
I tried to change my editor from JCE to TinyMCE : same result.
I must add that both JCE and TinyMCE do work in front-end article editing.
Any idea ?

Pascal Conil-lacoste

Moonsoft support 2013-02-03 21:35:17


I would like to Know how in the front end visitors can view all data clicking on the row... I mean that I have visible only 4 columns but I have more fields (8 fieds) to show .

The website page is:


Moonsoft support 2013-02-05 14:18:35

Hi there, is CalcBuilder capable of dealing with if/else/elsif statements?

IE something simple like this:



Edited by moon_907 - 05.02.2013 14:18

Edit, Nevermind! figured it out! had forgotten brackets


Edited by moon_907 - 05.02.2013 14:22

Moonsoft support 2013-02-08 17:40:31

I want to generate a cost calculator for roofing.

1m x 1m
1m x 2m

2m x 2m
2m x 3m

etc etc

Can this be done with two drop downs each with 1m, 2m, 3m, 4m etc and then calculate a price depending on the user input?

The prices would be supplied in a grid format?


Moonsoft support 2013-02-10 11:33:50

Hi, im using ListManager 0.03 and i would like to show the data as d%m%Y% is it possible? And is it possible to show data ordered by date (recent first)?


Moonsoft support 2013-02-10 17:05:57

Hey guys,

Our calculator works perfectly on Chrome, Firefox and Safari - however, when you hit "Calculate" on Internet Explorer 8, even when you haven't selected any of the tick boxes, their original values are automatically added to the total, even though they have not been chosen. Any ideas how to fix this?

Here is the relevant web link if anyone wants to check it out:


Moonsoft support 2013-02-12 15:51:56

Could you please tell how can I multiply option list value with linked list value.
if option list value is 5 and linked list is 5_10, so logically, the formula must contain 5x10, but unfortunately I can't get to this line.

$result=$option*$option_linked (but the result is 5*5, not 5*10)

so, the question is how correctly write a formula to get the multiplation 5*10

Moonsoft support 2013-02-12 17:35:58

also we met a problem with data import to PDF file.
we put ON Show export to PDF, we get the PDF button, but the PDF file itself comes empty. so the problem is - how can we edit the PDF file, also the PDF file preferences(put in logo, company information etc) and make all the chosen preferences in calculator shown in PDF. also how to rename PDF file button.

2. question is based on CSV file import to CalcBUilder. we do have excel approx 40x50 matrix, we will make CSV from it, but it comes too difficult to import the data to CalcBuilder, cause we've installed your program only last week.

Looking forward to your answers

Moonsoft support 2013-02-13 09:12:33

For example i have 3 buttons in option list and 3 in linked list
When i open my page i can't see result of 1st option in linked list
I also can't just press on first option and get result in linked list.
It is possible only when I press 2 or 3 option and come back to 1st.
How could i automatically have 1st option selected in linked list when i visit page?

Moonsoft support 2013-02-13 09:28:11

pdf file after calculating showing me values of option list and linked list, but i need NAMES of option lists there
How could i solve this problem?

Moonsoft support 2013-02-14 10:41:36

I added date option and nothing happen when i choose the date.
Also calendar form looks a little moved.
Will it be possible change day names to another language name?

Moonsoft support 2013-02-19 15:38:19

Hi there,
is there any way to allow math filters on data values? e.g. Values greater then, (>) or Less then or equal to (e conventions (, . separators) etc) in next versions?

Thank you in advance.

Moonsoft support 2013-02-20 15:35:51

Hello there,

I have noticed 2 things since the last version:

1) the multilanguage status link,
instead of staying on the top of the joomla backend menu (near visitor number, admin, link to view site etc),
when i enter calcbuilder, it starts floating in a set length below the top.
I believe it has something to do with the .modal class of your css style.

2) is the option "Show last calculator inputs in frontend. Select type of saving." working?
I tried both settings but the last user input didn't seem to be saving for me. Am I missing something?

Thank you in advance for your answers!

Moonsoft support 2013-02-21 13:57:38

Mi formulario tiene dos listas que depende la segunda de los seleccionado en la primera. Mi problema es que quiero que tanto en los resultados, como al exportar a PDF, me salga que lo se ha seleccionado en la primera lista y en la segunda. Por ejemplo si el usuario en la primera lista selecciona entre las opciones, "Color amarillo" y en la segunda lista "Tamaño estandar", en los resultados que escriba: Usted ha seleccionado, Color: Color Amarillo y Tamaño: Tamaño estandar.

Moonsoft support 2013-02-25 09:54:10


Strange thing here : Whenever I try to edit a number type field in the front-end form (no ajax), it fails with the message "This value must have 0 decimals" and then "Incorrect values" no matter it counts 0 or any number of decimals. This only happens in the front-end editing.
I tried to change the number of decimals allowed to no avail, same problem.

Please help.

Pascal Conil-lacoste

Moonsoft support 2013-02-25 14:53:31

Can i use the nice red and green Yes/No button in my frontend calculator? (just like the in de administartor) Now i only get a checkbox.

Moonsoft support 2013-02-27 01:42:39

I'm using Listmanager 1.1.1 and joomla 2.5. How do I get the text in a field to wrap?

I tried switching the field from Text to Text Area but still all one line. I am looking at your very nice "Countries" demo, trying to have the cells wrap like that.

Edit: I found the line in the CSS and commented out 'white-space: nowrap;'

I would still like to set column-width in the UI, though.

Edited by moon_682 - 27.02.2013 02:18

Moonsoft support 2013-03-02 19:37:16

Cant make new matrix
Just installed calcbuilder on joomla 3

I press NEW matrix and get empty page with this link: administrator/index.php
Could you please help me solve this problem

also installed matrix example, when i press non output matrix i get empty pagewith this link:

Edited by moon_912 - 02.03.2013 19:46

Moonsoft support 2013-03-04 23:49:21

I have a table of rows, one column is specified as a sort column. When I am showing a partial number of rows (say 20) and use the sort up/down arrows, when I select a first-to-last sort it shows no rows.

It works fine when I select last-to-first.
It works fine when I show all rows, either first-to-last or last-to-first.

Moonsoft support 2013-03-11 15:40:50


I am trying to get a simple calculator working on a site just updated to Joomla 2.5.9. I exported the calculator from Joomla 1.5 and it was working fine, but since the upgrade to Joomla 2.5 it no longer works (I purchased the updated component for Joomla 2.5 and installed it, then imported the calculator from Joomla 1.5).

I have tried importing your example calculators, but none of them work either, so I cannot see what is wrong. The only error message that I can find in my Firefox browser is "TypeError: $(...).addEvent is not a function
Source File:
Line: 561"

You can see the error if you go to, but nothing happens when you click the calculate button.

Please help urgently.

Moonsoft support 2013-03-12 01:58:37

Is a ListManger list in a Joomla article indexed by search engines such as Google?

Moonsoft support 2013-03-13 15:35:09


I built a form, and added the decimal points in php as the commas and dec points weren't rendered even though I added in preferences.

I do have joomla 1.5 version. My calculations do else work fine, but not the last one:







Frontend result:

result_1 ok
result_2 ok
result_3 ok
ratio ok
result wrong


Anybody out there who can tell me what I did wrong?

Thank you in advance

Kind regards


Moonsoft support 2013-03-19 02:50:18

I have created a list which allows users to enter data.


However, the pop-up modal entry form for new records on the front end (or in-page form) shows truncated entry fields which only show 2 or 3 characters.

This doesn't allow enough space to enter data. Data can be entered and it will show up in the front end.

All of the field lengths are set to 20 in the List Fields section of the back-end.

It would be great if you enabled forum users to upload a JPG or PNG so you could see.

Edited by moon_934 - 19.03.2013 02:50

Edited by moon_934 - 19.03.2013 03:10

Moonsoft support 2013-03-19 15:47:46

Hello there.

I wanted to integrate an redform kontakt me form with the variable as else used in articles:


I also tried with ##{redform}15{/redform}##

but it is printed instead of showing a form..

Can you help?
example for form output else:

Thanks again

Moonsoft support 2013-03-19 16:56:28

This might be a wishlist item.

My list includes an email field in it. Currently, ListManager displays this email field in the clear.

Would it be possible instead to display this as a cloaked link to prevent spamming? Or, to use a contact form with a captcha?

Joomla does this with email fields by default.

I don't want to make my users have to enter HTML code to encode their email (they will have no idea how to do that).

Moonsoft support 2013-03-20 16:41:43


My probleme is here

Can you help me?

thank you


Edited by moon_605 - 20.03.2013 16:42

Moonsoft support 2013-03-23 23:34:20

Hi, is it possible to pass a variable to the name of the generated pdf?

Moonsoft support 2013-03-26 03:40:58

My moonsoft user name is : moon_984
Hi Helpdesk,

  A) Please refer to
  I am using your 2.1.5 calc builder. And I cant use Please see note A below.

  B) I cant create template in the joomla under calc builder component, please advise if I missed out in anything...

  c) Even if I managed to upload the xml file, when I edit the fields and codes and even other parameters, it cant be saved or 'saved and close' under your component. Some issues are happening.

  d) the submit/calculate button is blank.

  e) i cant set the preferencess in calc builder also as even I save the saving of the setting is not effected at all... Please kindly assist.


  Please kindly advise.....


Note A

  I just click submit and there is error message -

  1) ******A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.

Script: ******

  Further check on the TOOLS -> WEB DEVELOPER -> ERROR CONSOLE I found the below.
  2) It is Timestamp: 25/3/2013 10:53:02 PM
Warning: Use of attributes' nodeValue attribute is deprecated. Use value instead.
Source File:
Line: 3522

Moonsoft support 2013-03-26 11:29:07


I am so frustrated as it seems that my updates in default.css in modules/assets/css simply are ignored

I adjusted:
.cb_result tbody tr {
border: 2px solid #ffffff;
border-radius: 5px;

.cb_result tbody th {
padding: 8px;
border: 1px solid #009e00;
border-radius: 5px;
-moz-border-radius: 5px;

.cb_result tbody td {
background: #ffffff;
border: 3px solid #FFFFFF;

and cleared cache. I even made som inline style with white borders.

...but still I do have grey borders..

please help

Moonsoft support 2013-03-26 19:25:54

Buenas tengo creado una lista, pero cuando añado una descripción y lo guardo desaparece el texto y por lo tanto no lo muestra en la web, estoy utilizando joomla 2.5.

Un saludo.

Moonsoft support 2013-04-01 18:56:46

Buenas tengo una lista de paises creada y por defecto el componente muestra los primeros 10 registros en orden alfabético, me gustaría saber si es posible que apareciera por defecto un pais (en mi caso quiero que aparezca España) al acceder al componente.

Un saludo.

Moonsoft support 2013-04-04 14:53:53

Hey guys

I have recently started using Calc Builder and noticed whenever i click on the Calculate button at the bottom i get a Parse Error.

"Parse error: syntax error, unexpected '=', expecting T_VARIABLE or '$' in public_html/******/components/com_calcbuilder/models/calcbuilder.php(400) : eval()'d code on line 1

What can be causing this and what is the way around it?

Thanks for your time.

Moonsoft support 2013-04-04 18:41:08

Dear calc builder support:

I want to add new field but can not be saved after click the save button of joomla.
joomla 3.03
what is wrong here?


Moonsoft support 2013-04-05 17:36:03

Good afternoon,

when try to show the component by the lan I don't see the correct list.
If I try to click "Export to Excel" or "Export to Pdf" the function doesn't work.

I try it in many version of joomla (1.7.3 and 2.5.9) and many browser:it only works correctly connected to localhost (hosting site).

Best regards,

Moonsoft support 2013-04-11 14:34:55

I work on an iMac and have just started using ListMaker. I have a Business Listing working fine and on my local host. I want to move the dB to production. I thought I would Export to Excel, then use Excel to create CSV which I could then import on production site.
However the Excel Export file can not be opened by Google Spreadsheet and when I use Apple's clone called Numbers, it also says invalid Excel format. I have an image of the Numbers screen which pretty well describes the details but I don't see how to attach that to this thread.

Moonsoft support 2013-04-18 19:27:03

Hi there, hope you are well

Can you tell me how to move the result of the calculation to the right of the 'calculate' button please.

Which file do I need to edit? And can I float (css) both elements etc?

Thanks for your time, luego.

Moonsoft support 2013-04-18 19:37:25

Hi again

If I type in a wrong figure etc into the field it says the following:


Seems like a problem with the language file?


Moonsoft support 2013-04-19 14:46:48

sorry forget this

Edited by moon_1034 - 19.04.2013 15:50

Moonsoft support 2013-04-23 16:42:51


I have a calculator that has the following fields..

Annual Salary

Then in the code I have the following:


This obviously take the two hours divides it by 8 (number of hours in working day) and times it by the salary.

Layout is currently:


Sum =

What I want to do is allow the calculator to display an hours1+hours2 sum after the two fields then I want to also introduce another sum display to work out the cost per day (depending on the salary)

So the display would be:

Hours1 (field)
Hours1 (field)

sum display (1+2) =

Salary (field)

Sum display per day =
Sum display per year =

Can you help me with the code and how to do the display please.

Many thanks

Moonsoft support 2013-04-25 18:16:18

Buenas, hemos detectado que algunos usuarios no pueden teclear en nuestros formularios, si les aparece el cursor pero no pueden teclear.
Al que le pasa le pasa en todos los formularios.
Podéis indicarnos donde puede estar el fallo? Será cuestión del explorador?

Moonsoft support 2013-04-29 13:45:48


The Joomla theme I am using includes a nice CSS class for forms which I would like to use. How can I use this class for Calc Builder forms? I've tried assigning this class to the input CSS fields but it doesn't work.

Finally, there is some space above the input form. How can I remove/ reduce this?

Many thanks,

Moonsoft support 2013-05-06 17:16:55

I imported csv data. It works ok
But i want to edit data in the backend. When i open manage data on the listings manager and select a datarecord, i can see the fieldnames but no data and there is nothing to edit.

Can you help me with this?

Moonsoft support 2013-05-07 20:28:59

I have created a new entry form for people to add themselves to the list but I cannot get it to show on the front end. I made sure it was selected in the Select List/View in menu settings but it still doesn't appear anywhere. I am sure I'm missing a step but I can;t find it. Can someone please help?

Here is the URL of my list

Thank you!

Edited by moon_1052 - 07.05.2013 20:39

Moonsoft support 2013-05-09 11:55:12

Buenos días,

Por favor, agradeceríamos saber si es posible el siguiente escenario:

Dado un campo tipo radiobutton (pj.: ¿Quiere el servicio especial? Si / No), si el usuario selecciona "Si" que realice una operación y despliegue el resultado en el Exit layout, y si marca "No" que dicho campo no aparezca en el Exit layout (no que despliegue valor 0 o similar, sino que no se despliegue).

Joomla 2.5.11
Calc Builder 2.1.2 (no utilizamos 2.1.5 porque colisiona con la template).

Muchas gracias por vuestro tiempo.

Moonsoft support 2013-05-12 16:43:54

J! 3.1.1
Calcbuilder 2.1.5

When I publish the module, the page starts auto reload automatically into a loop.


Moonsoft support 2013-05-13 05:12:56

Hey all.
Is there a way to replace the normal calculate button with a graphical button image.

Would like something larger to make it easier for the users.
(Button right down the bottom)


Moonsoft support 2013-05-13 13:16:05

Hi, it seems that the page where I have included the calculator is effecting the sites accordion menu on load.

In the source of the page your module seems to be loading calender and upload js files, can these be removed somehow to speed up the page load?

site is


Moonsoft support 2013-05-16 02:16:33

I would like to be able to disallow duplicate entries in one of my lists. Is there a way to do this?

Thank you!

Moonsoft support 2013-05-16 21:21:34

i am trying to make a list of restaurant menus. I need the layout look like the on please provide me the css codes i need i cant make my custom table in lm.

Moonsoft support 2013-05-18 09:45:03

i get this errors;

with spinach , mushrooms , onions , tomatoes and cheddar cheese. ","3":"8.95"},{"id":"14","1":" Grilled Chicken Omelet

with grilled chicken breast strips , onions , bell pepper , salsa and cheese blend . ","3":"10.95"},{"id":"15","1":" Ham and Bacon Omelet

with crispy bacon , diced ham , hash brown , tomatoes and cheddar cheese. ","3":"11.95"},{"id":"16","1":" Smoked Salmon Bagel

with tomatoes and cream cheese. ","3":"7.95"},{"id":"17","1":" Croissant Ham Sandwich

Ham, fried egg, bacon, onions, tomatoes and lettuce with Harrisa Aioli. ","3":"10.95"},{"id":"18","1":"Veggie Panini

with tomatoes , basil and cream cheese. ","3":"5.95"},{"id":"19","1":" Turkey Ham Panini

with tomatoes , onions and cheddar cheese. ","3":"6.95"},{"id":"20","1":" Boubouffe Lamb Burger

with grilled focaccia topped with a fried egg and served with fries . ","3":"10.95"},{"id":"6","1":"Liege Waffles

Traditional and authentic belgium waffle infused with pearled sugar and fresh fruits.","3":"8.95"}]}'/>

Moonsoft support 2013-05-24 14:58:13

If the data contains asians languages, the exported PDF cannot display, any solutions?


Moonsoft support 2013-05-27 08:41:29

Buenos días,

Por favor, quisiera saber si es posible cambiar el icono del botón que permite imprimir el resultado en PDF, o bien cambiarlo por texto.

Gracias y un saludo.

Moonsoft support 2013-05-30 14:37:54

Hi there we have set the result to diplay to two decimal points. Could you help us witha small problem. the results show up and work fine but if the result amount does not need two decimals it removes the zero

For example if result is 3.56 it works but if result is 3.30 its drops the zero and displays it as 3.3

Because this is a currency value i need the zero to show up please help with this

Moonsoft support 2013-05-30 23:58:51

Can the Detail / Delete / Edit icons display on the left of the list view table, instead of the far right? I looked at the modules/mod_listmanager/assets/css/default.css file, but I don't know enough CSS, etc. to know how to modify that file or to override in a custom.css file

Moonsoft support 2013-05-31 22:56:18

I just installed the component and I am trying to setup my first list.
First, the component were not saving the list long description nor the fields details. After checking the forum, I did installed JCE Editor and now it is saving the long description.
But it is still not saving the fields details (names, type, etc.).
I can't add any field. I meant, It will let me create it but it will not be saved.
I did follow the instructions. What am I missing?
Using Joomla 3.1. Nothing else be installed, but the JCE Editor.

Moonsoft support 2013-06-03 22:44:35

I'm not a programmer, hence the apparent simplicity of the formula. It works but when I enter a higher data calculator go wild and show 0.
I do not know what I'm doing wrong.
I would be grateful for any clue.


thank you in advance

Moonsoft support 2013-06-04 17:31:37

I have registered users setup with the ability to add information to the list, but I don't want them to be able to modify, edit or delete other users items on the list.

Moonsoft support 2013-06-04 22:08:59

When I type the & symbol the line does not show the link to view more details, it instead shows the whole line?


Moonsoft support 2013-06-04 22:13:02


I can see data from my form at the backend.
On the frontend i see the searchbar but no data at all.
In the database i can see all data is correct.

Data is imported from a csv file

What can i do?

Regards Andre

Edited by moon_699 - 04.06.2013 22:38


Edited by moon_699 - 05.06.2013 10:17

Moonsoft support 2013-06-07 15:07:10

Hi Support,

Not sure if I have missed something but I want to create a main list and then a staff list. When adding a record in the main list I have a field titled staff name which is linked to the staff list and should allow the user to select the staff name from the available staff members in the staff list. I have successfully done this using SQL to other tables on my site but am not sure how to do it within list manager. I know I can set the field type to "Link to other list or view" but can not find any documentation in either the manual or this forum on how to use it... Some basic instructions would be greatly appreciated.

Moonsoft support 2013-06-08 11:46:50


Component is fantastic and currently doing testing. I am loading two select boxes using SQL statements (Thanks for the info previous thread)When I set to a Select Filter for the column where it sources data either from an external table or from within List manager the rows are there but nothing shows? Any assistance would be great!

Moonsoft support 2013-06-08 11:48:51


Columns that I store the ID of the data from either another table of from within List Manager show with the actual data value but when emailing show the ID and not the data value?

Moonsoft support 2013-06-08 11:50:20


When I click the export to pdf button a white page shows up with the list title at the top and line then line and page number at the bottom but no contents?

Moonsoft support 2013-06-13 20:20:41

Good afternoon. I need help to install the List Manager. I'm from Brazil and I downloaded the package ListManager with component and modules. The problem happens when I try to install com_listmanager the following message appears:

Can help me install?
thank you

Moonsoft support 2013-06-17 20:25:16

good afternoon
I'm conducting some tests. I created an address field and it looks like this on the front end: Endereço/Rua ##Endereço/Rua## No option to edit or fill.
Deletes the field and he continues it without the option to edit or fill.
I wonder also how to create a new field and leave him in second position
Please I need help.
thank you

Moonsoft support 2013-06-19 13:26:51


It's impossible, In firefox to create un list option

Why ?



Edited by moon_605 - 19.06.2013 16:22

Moonsoft support 2013-06-19 15:01:19

Good day.
I wonder why the button detail right from the lists does not work?
I made an example of registration and does not display the same data.
Can you help me?
thank you

Moonsoft support 2013-06-20 15:56:34


I have created an options list and everything is working but when i export it to PDF or Excel it displays as a number and not the original field name?

How can fix this please/

Thanks in advance

Moonsoft support 2013-06-22 18:18:51

when i clic on export pdf i have a blank page witch fifefox and a erreur with google chrome


my joomla is not at root and i think it's for that
i trie with another joomla in root and it's ok

Edited by moon_1139 - 23.06.2013 00:40

Moonsoft support 2013-06-24 10:23:27


How Can I translate in french "Search, Add, Show, Show all, and filter in fronted please ?

thank you


Moonsoft support 2013-06-25 19:09:59

As the topic says I'm trying to get it to hide/show tabs depending on whether a field type yes/no or multiple-option is checked.

First off the tabs is working fine.
The reason I'm using tabs is that in the end, there will be many fields in my calculations. So it's simply to make it more userfriendly and dont show fields that the current user dont need.

The calculations is for house renovations and energysavings.
The idea of ​​it is to let the user choose what to calculate.
For example:
New windows: Yes/No
New roof: Yes/No

If "New roof" is checked a new tab is added or shown.
And If "New windows" is checked a new tab is added or shown.

And of course in the end we can add it all up.

Is it possible to do something like what im describing?


Moonsoft support 2013-07-01 12:31:08


I installed List Manager on Joomla 2.5 and IIS 7.5 (PHPISAPI5). It went succesful and I made a list, fields and put in some data.

The backend works ok, but the frontend generates an Error 500.

Please help.





Error Code

Requested URL

Physical Path

Logon Method

Logon User

Moonsoft support 2013-07-01 14:52:44

Hi again,

Still busy getting it to work.
I see the blue layout on the frontend, but the list is not populated with data.
I tried almost anything, but I cannot get it to work.

My browser says: waiting for....
It suggests that not all data is loaded.

Please help.

Moonsoft support 2013-07-02 19:48:36

I insert demo "Simple calculator" and it not working (NO RESULT)
cashing of page are "off"

Can you help me (with other demo have some problem too)

Moonsoft support 2013-07-10 17:01:35

I'm trying to allow a front-end user, which is filling a new record in an existing table, to choose, for a specific field, among the values already present in another table.
As an example: I have a pre-compiled table with a number of car's models (let's say: car-1, car-2, car-3). Then a front-end user inserts its own data in a different table (having fileds: name, address, ..., car model), where the owned car can only be selected (with a drop-down menu?) among car-1, car-2, car-3.

Would it be possible?
Best Regards

Moonsoft support 2013-07-11 15:19:37


When I create a text field, I canb select URL as a validation method. This gives me a nice way to create a URL database for external documents.
To make it useful, it would be nice if the listed URL is clickable, thus generated with a hyperlink. How can this be done?

Moonsoft support 2013-07-18 01:24:00


perhaps you can help, I would love to use this exelent extension.
I have test it with your exemple Simple Calculator, when I give the two numbers and press calculate, nothing happens, developerTools shows me:
TypeError: CB is not a function
SyntaxError: JSON.parse: unexpected none-whitespace character after JSON data

I use Joomla 3.1, Widgetkid and Zoo from Yootheme, and Breezinforms on the site.

You can look at:

The same happens on my localhost, where I have installed jqueryEasy with no-conflicts.

What can I do?

Thanks in advanced

Moonsoft support 2013-07-23 08:59:05

tried loading the component and also tried adding a couple of fields.
worked ok, but now getting "PAGE OK" and a completely blank page

complete joomla installation is showing blank page with just page ok written in left hand side top corner of the page.

what should I do now ?

Moonsoft support 2013-07-24 09:21:08

I created a list, but saw after a while I needed to add some fields.
My last field should fit it, after the 3th field I already had.
How can I change the order of my fields ?

I found it already in the from & detail layout.
And under the VIEW-option, I can make the order of some fields, but it doens't change on my front-end

But not for the frond-end listing.

Moonsoft support 2013-07-25 08:08:22

Dear Sir,

Consider a simple scinario like this.
A Table having three fields. Out of which one should be option list.
Now as such, when trying to import from CSV,
wherein the value is exactly same to on of the option list value,
csv import imports the rows, but the otpion list value is displayed as blank.

what should I do

Moonsoft support 2013-07-26 20:32:05

I've installed the component. After I tried to fill as example a description field in russian I've got ??????.
In phpMyAdmin I see all calcbuilder tables in latin1_swedish_ci charset.
How to change them to UTF8 and how to make utf8 as default charset. Or tell me please other way to solve the problem with russian language.

Thank you.

Edited by moon_1193 - 28.07.2013 12:02

Edited by moon_1193 - 28.07.2013 12:07

Moonsoft support 2013-07-28 21:27:19

How to get matrix's keys as array (as example row's keys)?
Or could I get values from option list as array?
Thank you.

Moonsoft support 2013-07-29 12:56:28

Hello to Moonsoft,

is there an option to activate this? The field is field but the mails come with empty subject.

Thanks in advance for your help

Moonsoft support 2013-07-29 13:23:10

I have a new calculator but need to be able to format the structure and styling of the output report (PDF, email or excel). I need to be able to move the results around on the page to make it easier to read and format the text styling using CSS. Can anybody help.



Moonsoft support 2013-07-29 19:07:30

On my book with retina I see very uncomfortable editor's window.
Like on print screen.

Could I change the editor?

Edited by moon_1193 - 29.07.2013 19:07

Moonsoft support 2013-07-30 17:06:45

I try to make tabs view as written on quickstart pdf, but it doesn't work.
1. I made simple html structure on Form Layout
2. I wrote the same code at javascript section on "Executed on loaded page". (but in pdf it written to place code "using the first option Javascript events")

Edited by moon_1193 - 30.07.2013 17:32

Moonsoft support 2013-07-31 02:27:42

I am running Joomla 2.5 and upgraded Moonsoft Calc from an old version and now my complex calculator is broken. I also am unable to create and save a new form as I get Error Saving Form.

I have my form export saved, but really need to get my quote form back working. This was a quote form we originally had you guys custom build.

We just repurchased a subscription to do the upgrade. The backend is pretty! Can you help me get it working again?


Moonsoft support 2013-08-02 01:40:05

Tried the package install. No go. Unzipped pkg and installed one at a time. All OK except, the important one, plg_listmanager.,zip

Can I just unzip it on my comp and FTP the files to joomla folder///admin?

I trie4d the install from directory but "access restricted", and changing permissions did nothing to help.


Moonsoft support 2013-08-04 08:54:31

On my site there two customer groups (managers and customers) .
I want that one group can see only result and another - detailed result.
I think I need to duplicate calc and make some changes in exit layout.
I could use copy-paste but is there an easier way?

Moonsoft support 2013-08-04 11:49:17

Does the "css class" option box in the "fields" tab alter the look of the input form when viewed in the module on the page? Can I write custom CSS to override bootstrap and my template CSS?



Moonsoft support 2013-08-05 22:09:22

I try to modify CSS _cb_tools_send. And I can't understand how to make some changes.
Now I have icon-envelope like on pic
I want to insert my own icon.

Where should I make changes in CSS, if I turn OFF Import CSS Bootstrap?
Joumla 3.
Thank you.

Moonsoft support 2013-08-06 05:01:46

Is it possble to insert a back button into a frontend form so clients can go back to the last step if they want?
I also want to print directly after I hit the calculate button is this possible or is it just missing from the output?



Moonsoft support 2013-08-06 20:29:27


I have an existing sql database that was created with a similar program as List Manager. It is a simple sql database. I've tried the copy * paste a CSV version, and the SQL - well, " SQL Query to load " is another language for me. The "Help" icon just says "You can use joomla table prefix (#__) in query" - whatever that means.

Is there a way I can import the existing SQL dbase, without having to re-do the whole dbase in to List Manager?


Moonsoft support 2013-08-07 09:37:48

I need to put exit layout next to form layout, because the article is wide, but not height. Exit layout will contain lots of detailed information.
Could you help me?

Moonsoft support 2013-08-07 17:44:12

I have problem with validation of multiple sections.
I do not know too good php, and sorry for my english.

My code:

$result='SzerokośćWysokośćFelcKolor ramkiNazwa ProfiluOścieżnicaSkrzydłoIlośćUwagiTyp';

It is checked only the first section, after adding the next section code does not check it anymore.

Also do you have solution for send pdf by mail after click custom button which shows in "Exit Layouts", after calculation (something like submit button).

Please help.

Moonsoft support 2013-08-07 18:15:36

After updating from some older version to 2.11.11 linked fields with level two linking wont pull multivalues anymore. Variable "from_state" works but next one "from_state_to" (linked to "state") will not. Did something change or is it a bug?

Moonsoft support 2013-08-07 22:24:33

I was looking for 'Style PDF' in this forum and found that I should put some CSS styles into default.css for change style in PDF layout. Is it right?

I put "div._cell" class into default.css and that works in Exit Layout (&#60div class="_cell"&#62) but not in PDF layout.
Where I did mistake?

The second question is where I can change the default size of textarea field?
The third is How could I change default indents on PDF?

Best regards.

Edited by moon_1193 - 08.08.2013 16:23

Moonsoft support 2013-08-09 11:55:03


i have install the ListManager on my Joomla 3.x Testpage

I have Problems to select a Date with the internal calendar.
It is always taken only the current days date...


Edited by moon_1210 - 09.09.2013 11:27

Moonsoft support 2013-08-09 23:33:11

I am trying to use this component for creating a list of members for a non profit organization. Basically I want 3-4 fields (fname, lname, business name, email) to show up in a list but then I want to have a "view details" option that will let me see all of the other information about the person (address, phone, etc)

What is the best way to do this?



Moonsoft support 2013-08-18 18:21:17

Trying to put a custom design on the module but there is no suffix option in the module

Moonsoft support 2013-08-19 12:42:07

Hello. I'm testing the calculator on local computer first. The calс works. Then I tried to test on web and got
"Fatal error: Only variables can be passed by reference in /home/advprint74/ : eval()'d code on line 16"

Moonsoft support 2013-08-20 14:39:46

Could I add fiellds more then 15?

Moonsoft support 2013-08-20 23:34:06

When i try to add "name" and "value" for option list or multioption in "Action" the field stay whiout nothing in backend. Impossible to fill all field. But no problem with the popup for "CSV Actions" or sql in Multivalues.
I used Firefox 21.0

Moonsoft support 2013-08-21 09:18:47

I cant find the file to change the css for the Calculate button and the rested button


Moonsoft support 2013-08-26 09:41:33

I'm setting up the feild as text, and also trying as textarea but both give me this error

Value must be greater than 0

Moonsoft support 2013-08-28 23:34:41

I just installed the example in my Joomla 2.5 site of"Hide/Show form fields depending on select combo box" and it doesn't do anything other then have a drop-down to select Text or Date. Once selected nothing happens. The file downloaded and imported is called Filtered_Sections.xml.

I'm trying to get a couple fields to show only if a check box is selected and was hoping this example would guide me in the right direction. Any ideas on how to get it working properly? The other examples seem to be working fine.

Moonsoft support 2013-08-30 13:16:02

Hi there,

Can anyone advise the best way of embedding a YouTube video within the 'Details' view?

At the moment I am trying the standard iframe embed code from YouTube within a text area field, but unfortunately Listmanager seems to strip the code from the editor field when I save it.

My TinyMCE plugin settings and Text Filter settings within the Configuration menu is set to permit the iframe tag.

Any advice/help would be appreciated.

Moonsoft support 2013-08-30 15:45:33


I'm am trying to figure out a way to make the form display the result to the user before clicking the submit button and sending the form results to me.

I noticed the field option "Inline result" but i can't figure out how it works? Does anybody have a description or an example I can see?

Or maybe you have another suggestion for me to make the form show the result befor e clicking a "send results"-button.

Btw. I tried the "Hide Calculate button and get results on change value of every field"-option in combination with the "Send form results to" but that does not work very well, because every time you click or change any value in the form, a new e-mail is sent...


Moonsoft support 2013-09-01 17:11:25

Im trying to make a calculator like

if there a sample already made so i can see the basic code for the sliders and take example.

I think many can use suck a function.

Moonsoft support 2013-09-19 03:15:21

I am a new user of CalcBuilder in a Joomla! 2.5.14 installation.
I have a problem with radio buttons. The values ​​are set to JA and NEJ (YES and NO). When I select Ja (Yes) displays the results all the time NEJ (NO) and the result is displayed without counting the value.
If I change to Option List with the same values​​, it works properly


Niels - DK

Moonsoft support 2013-09-20 18:21:06

hi, i have several modules using jquery and using jqueryeasy i dont have any problem with them, recently i installed list manager on my joomla, and that module disables the whole site. how can i do for fix it?


Moonsoft support 2013-09-23 15:55:46

Is there a quick way to add a record count to my list?

Moonsoft support 2013-09-24 18:26:04


Today my client called to tell me that his website did not display one of its list properly, i.e the list was truncated to 4 lines although it counted twenty-some records.

So I checked, found the records evaporated (probably my client mistake but I can't say for sure), and decided to reinstall a recent backup... but before that I exported the other lists in CSV to be sure I won't lose any records my clients had created since the backup.
After that, things went haywire :
- No lists are displayed anymore (loading, and nothing)
- When I check the records in the backend, some of the colums are empty (multiple value fields and option lists) but the value do appear if I export the lists inCSV.
- Values in Multi-value types get repeated
- When I export in CSV I can hardly use the resulting tables : I have HTML fields that get some data with ";" (usually blanks  ) that mess my resulting tables up.
- But in interestingly, I can create records from the front-end which get displayed but only if I search for them (If I search for other records I get nothing)

You can check the site here (the list is at the bottom) :
You can type 'test' in the search box to see the record I entered in front end.
I already tried to disable my other jQuery scripts but to no avail.

I can give you backend access, just mail me.

Pascal Conil-lacoste

Edited by moon_1262 - 24.09.2013 18:29

Moonsoft support 2013-09-26 16:32:48


I noticed that apostrophes in field names prevent corresponding fields to appear in Form. For example, with the field name 'Maître d'ouvrage' I will get ##Maître d'ouvrage## in the form instead of a fillable text field.
Unfortunately there is a heavy use of apostrophes in french and I can't always avoid them. Furthermore this problem appeared in the last version it worked with previous versions.

Pascal Conil-lacoste

Moonsoft support 2013-09-27 15:36:51

Hi, everybody.

Here is what i am looking for one an instructual video on how to use this List manager..

two here is the situation i have i need to be able to add on the back end several table and be able to see only one list on the front end.. like a master list.

thanks for the help..

Moonsoft support 2013-10-03 14:37:40

Hi there,

I want to send ALL my form results to an email address, including my "inline results". But when I try to configure this in the preferences tab, it seems that the only fields that can be included are textfields!

Is there any way to include other field types than textfields?

Please help!

Moonsoft support 2013-10-05 02:29:44

I'm having trouble with the file upload field. Files that I upload don't show up in the results. I'm using version 2.1.9. Any suggestions?

Moonsoft support 2013-10-07 05:27:26

I bought this a year ago, and could never get it to work. I talked to somebody there recently, who said I had to buy it again, just to get it to work, but it STILL does NOT work. So, right now, I've bought it twice, had it for a year, and have never been able to use it. It won't show up on the front-end, it just shows as any empty list that it wants you to search. This is urgent, super frustrating, and I'm out money twice for a product that is NOT WORKING.

Moonsoft support 2013-10-09 12:25:19

Hi I just bought Calc builder and LOVE IT,

I have a form that lets the user enter their email address to send the results (so it isn't a field i set up) i also have the result set to send me an email every time someone presses calculate.

my problem is if i ask the user to enter their email address to get the price they wont do it, so what i want to do is get the form results and capture the email address the person enters to get the results sent to them by email. Is there a hack i can do to include their email address in the email it sends me.

I hope this makes sense


Moonsoft support 2013-10-16 15:12:22

In detail layout I create the view:

But when I control it on the frontend I see only:




The values are empty...
Can anyone help?

Best regards

Moonsoft support 2013-10-17 07:06:47

Is there a way to make the results show up on a new page rather than below the input fields or in a pop-up? It would be helpful for conversion tracking.

Moonsoft support 2013-10-18 07:57:45

Please can you give me some examples from List Manager Support.

I tried now for hours but can not update or add records in the frontend.

I created a simple table with name address and mail but during creation I already get errors when I try to save a field.

After that when I look I see the page on my frontpage with the data but can not update the field or add a new name

Please can you sent me a document or a zip file how to fill in the fields of the table.

Nice would be an example of a club with name category mail address and how to combine the joomla user database with this club database.

warm regards,


Moonsoft support 2013-10-18 15:44:06

When users register on my site they fill in several user fields, the most important is the Membership Number. I have a list of data that relates to each member and I want him to be able to add entries to the list, update existing entries and delete them but only for himself.
I have set up a form for editing the list and I have loaded the list using a csv file but the user has not added these records so I cannot use your 'user' option to filter the data so the member only sees his records and not other member records.
Can you suggest how I can filter the records by Membership Number which is a field in the user profile data base records.

Moonsoft support 2013-10-20 03:04:19

I'm upgrading to J3.0 and with it resubscribed for the great ListManager. I've having two areas of trouble.

1. Listing Edit error: Some values are incorrect
2. Search list not showing in front end despite back end list populated and set to searchable.

Please let me know what I can provide to assist.


Long time subscriber and fan.

Moonsoft support 2013-10-22 16:53:26

How can I place the calculators next to the products?
And how can I add the standard price to the calculators.

Moonsoft support 2013-10-24 18:32:58

Where can I put the translation for : This field is required.

can't find it in de lang. files

Moonsoft support 2013-10-27 22:25:01

I looking for the code where the pdf is made,
I want a diverent name for the pdf file is is now mpdf.pdf but like an other name
cant find the the creation of the file in the code

Moonsoft support 2013-10-31 09:59:34

show / hide

on the screen I manange to hide radiobuttons based on the value of a selection box

used the {display: none;}

but on the pdf I got the default value visable

I try {color:white;} but don't do the trick

url: Removed (no longer there)

Edited by moon_1209 - 31.10.2013 12:36

Moonsoft support 2013-11-01 17:26:16

I would like to be able to include certain variable values in the admin email ("Send form results to") only, without them displaying in the results or being included in the user email.

Specifically these:


Which I have included in the exit layout.

I can use CSS to hide them in the results and probably the PDF, but I can' find a way to keep them out of the user email.

I have tried just adding the variables to Preferences/Send form results to, but I guess that feature only works for text fields.

Thanks in advance for any help.


Moonsoft support 2013-11-02 13:19:13

Is it posible to use the content of "Name" in de form or code

name: posible
Variable: _pos

in code $_pos
in form ##_pos##

But can I call the content of the field name in the form and or code?

something like ##_pos## can't find it in the manual or forum.

Moonsoft support 2013-11-03 15:41:47

After pressing the calculate button:

The content of the email send to is only the content of the print pref. But without the (Include Form input) and (Include Result) content

The PDF include all information with the same settings.

Moonsoft support 2013-11-03 22:35:34

In the userdata log is see colums for the vars of type inline but they are empty


title vat = var

Edited by moon_1209 - 03.11.2013 22:36

Moonsoft support 2013-11-04 15:43:30

After results are generated, there is an option to send an email. After entering an email address and clicking send (the envelope button) a styled dialog box is generated. I assume that it is generated by JavaScript.

The issue is that the box has no text, so in some templates it's collapsed, and it has a close "X" button, a resize handle, a title bar, etc. Also it's z-order makes it appear under other elements.

Is there a way that we can use a system "OK" modal dialog box, such as is generated when an invalid email address is entered? For example, in the text field it could say "Email sent" with an OK button. Alternatively, a brief message could be inserted under the email address field, similar to how validation error messages appear.

Many thanks,


Moonsoft support 2013-11-04 16:05:24

Com_listmanager will not install. Tried installation from directory still does not install. Get the following error however I try to install.

0 SQL=insert into bme5k_schemas (extension_id,version_id) values ((select extension_id from bme5k_extensions WHERE name = "listmanager" and type="component"),"1.1.1")

Tried on hosted and local test server (running xamp)same error.

Mod's install okay.

Moonsoft support 2013-11-09 13:09:04

I am trying to generate a form to add or edit the list items. I have used the form generator to do this so the field names are correct. Instead of getting the entry boxes I get the fieldname surrounded by ## at both ends. The problem is the same for the Add function or the edit function where the fields are not loaded. This is the last problem to fix before going live with the new feature. This product has helped me very much and thank you for your support.
As you know I have made some changes to your code but not in this area.
Further investigation shows that the fields work in the form for the FULL list but do not work on the view. The generation was exactly the same. Should the update work for views?

Edited by moon_1284 - 09.11.2013 13:24

Moonsoft support 2013-11-12 15:24:46


Super user edits data in the backend.
i.e modify a value of a column of a list, save it.

Q: Could this modification be reflected in the SQL table as well ?

LM 1.2.14 / joomla 2.5.14


Moonsoft support 2013-11-12 16:49:40


How to configure to make a column clickable. i.e click on a column value, opens up a contact form and pass the column value as a parameter

I tried html instead of text type but to no avail.


LF 1.2.4 / Joomla 2.5.14

Edited by moon_1320 - 12.11.2013 16:56

UPDATE: I was successful to achieve it by using Link to other list, and field to filter.
Q: How to apply CSS to that field, since there is no option for this type.


Edited by moon_1320 - 12.11.2013 19:48

Moonsoft support 2013-11-13 10:32:36


Sorry to be a pain. After solving my Jquery problem I am unable to edit or add entries on the front end.

The screen slides down to go into editing mode but then it displays the below

Part ##Part##

##Part## is where i have to edit or add the entry. permissions it set to edit all fields.

from what I can see, there are no errors in F12 of IE only these below if it helps

HTML1202: http://jojonet/directory is running in Compatibility View because 'Display intranet sites in Compatibility View' is checked.

SEC7115: :visited and :link styles can only differ by color. Some styles were not applied to :visited.

Moonsoft support 2013-11-14 13:50:24


Help to make a printing calculator:

Moonsoft support 2013-11-19 14:05:36

Is it possible to force uppercase in a text field of a form. There is a CSS Class field but I am not sure how this affect the final input.

Moonsoft support 2013-11-22 20:52:08

I have created a Calculator, which provides you the number of units of product(s) you require to complete a job. To do this I have multiple Yes/No fields, when selected the answer is given. The problem I am having is I do not want the results page to display all the products, just the selected ones.

For example:

Product A: 20 units
Product B: n/a
Product C: 30 units
Product D: n/a

So I want to remove product B and D from the results page. What can I Do?

Edited by moon_1312 - 22.11.2013 20:53

Moonsoft support 2013-11-25 09:55:47

during construction calculator I took the "Example calculators: Hide / Show form sections depending on the select combo box (I)". I would like to get the same effect when using radiobutton. Could I have a short code javascript, which acted to on radiobutton? :)

Best Regards,
Marcel Haberski

Moonsoft support 2013-11-25 14:43:51

Via the front-end, i want to edit a list in a form layout.
When I click on the button edit, I have a list of the name aand the tags of my fields but not the data
Example :
Matricule salarié ##matricule_salarie##
Code nature heure ##Code nature heure##
Date début absence ##Date début absence##

An other question, what is the column Internal Name ? If I type a name, it is not saved.

Joomla 2.5.16
Listmanager 1.2.15

Moonsoft support 2013-11-26 06:13:35

Thanks for the great tool. I was able to accomplish my main goal within a few hours!

I have a few issues:
- The General tab and the Print Preferences Tab
- Html before and after boxes will not "save" data entered. When I enter data, click save, a moment later the page refreshes to have empty containers?
- I used the Form layout to enter Pre-form text, which works fine, except i would still like the PDF to work.

- PDF does not seem to make a proper PDF. Both my Adobe and 3rd party readers will not read the file. I receive
"Error opening document: "mpdf.pdf":
Error : Invalid file format

My biggest concern it to get the PDF working.

you can view and demo here

Joomla 3.1.5
Template: Joomla Art template Zite
JCK Suite 6.5.3
FireFox 25.0.1
IE 11

******** UPDATE **********

With continued testing I found the JCK Editor prevented the saving of input into the HTML Before/After sections. I switched to TinyMCE and it worked fine in IE and FireFox.

IE also has no issues with the PDF creation, but my FireFox still prevents a good file creation?



Moonsoft support 2013-11-26 21:01:02

Hi, I need help. I have a form. In first row I have a option list (A,B,C). In second I have a number line (width) and in third a number line too (height). If I choose A or B set width and height my own size. But If I choose C I would like to set width and height automatically to for example: 25. If I set to code in joomla administration: if ($type_name = "C")
$width = 1; ->it doesn´t work. Do you have any idea? Thank you.

Edited by moon_1350 - 26.11.2013 21:11

Moonsoft support 2013-11-28 05:01:27

There is a email address filed in my form. I need to validate the email address before calculation and sending email.

I wrote the code in Js event before calculation

var emailaddress = cb_getValue('email');
var filter = /^()+\@(()+\.)+({2,4})+$/;

if (!filter.test(emailaddress)) {
alert('Please provide a valid email address');

But after click the button in alert , it still doing calculation and send email to admin. What should I do?

Thank you very much

Moonsoft support 2013-11-28 14:31:58

Hi, mate

I put the calc module in an article by {loadposition XXX}, then I link it to an menu item.

The problem is the name of the calculator always show on the top of web page unless I remove the name from " General " tab of calculator.

How can I get rid of this small title from web page? I check the "preferences" tab of calculator but there is no such option.

Thank you


Moonsoft support 2013-11-29 06:13:11

Hi mate

Should I set field type as "Text" or " Date" ?

Should I type "date" in CSS field? It does not work when I set field type as "Date"

Should I set Frontend Date format in Preferences tab as "%d-%m-%Y" ? but the result include the "%"

I try everything above ,but even I type some random number ,say "456" , the email still can be sent without validation.

Thank you

Moonsoft support 2013-11-29 12:50:47

First of all, what a great component Calc Builder is!

Is it possible to make a Calc Builder form responsive? I have a two column form and that will mess up when adjusting the screen width...

With kind regards,


Moonsoft support 2013-11-29 21:51:59


I have a working calculator in which I have multiple 'yes/no' input fields. If the input field is 'yes' the answer is calculated, otherwise the default is "" allowing the next chosen field to be right under it, like a list.

This works fine when I receive the results in the modal window, however when I export it to PDF there are spaces created in-between the headings/results and I have not been able to remove them. The number of spaces do not correlate to the number of "" in between the fields. Some don't have spaces some do. The output code is identical so I don't see any problems there.

Any help would be greatly appreciated.

Thanks in advance.


Moonsoft support 2013-11-30 00:06:19

Hi! I would like to use the voting to display current relationship status with our partners. So instead of basing it on the average of several votes i just want it to display the last entered value.
Is this possible?



Moonsoft support 2013-12-04 21:39:58


My calculator consists of sets "multiple->YES/NO".
payment must occur by summing the checkboxes (YES/NO) field

But the FIELD, (YES/NO - type), has no option where you can enter a value.

How can I set the "number" of the "field"?
(Option list)
Actions: Add Delete All-------------------------Name_______Value_____
SQL Actions: Add Del
CSV Actions: Add

Moonsoft support 2013-12-05 06:24:16

Does ListManager use Mootools?

We are struggling more with Mootools and jQuery conflicts, so I an trying a plug-in to turn Mootools off. ListManager stopped showing lists so I think it must use Mootools?


Moonsoft support 2013-12-05 18:06:21


I have a calculator with multiple YES/NO fields, if the field is selected the output layout restates the field name followed by the calculation. However it is not pleasing to the see as the length of the fields vary.

I would like to insert a "tab" or "consistent spaces" between field name and the calculation. I have experimented by inserting "\t" in the code, with no luck. The program seems to completely ignore "\t".


if ($a == 'Y') $label1 = "Product name: \t" . ceil ($calculation1) ;

Any help would be greatly appreciated.

Moonsoft support 2013-12-08 13:01:02

Can you explain how the time limit for the historic access list works please. If I set it to say 4 months do the timestamp entries for 4 months get deleted automatically from the list? Is it calendar month? That is an access on February 15th at 9.00 am will be deleted after May 15th at 9.01 am ?
Is it possible to take the list and export it to csv? Thanks in advance.

Moonsoft support 2013-12-08 15:01:27

Hello dear Support Moonsoft,
how can Calendar to Jalali date?
when i select time day and save,then date normal not jalali Calendar.
how can fix it?

Moonsoft support 2013-12-09 16:08:32

Just installed List Manager. Had a list working. Changed the list (added two fields) emptied the table and re imported data) and now the list does not display?

Edited by moon_1371 - 09.12.2013 16:44

Moonsoft support 2013-12-09 21:31:48


I want to show multiple lists, as a kind of categories. But in the menu I can only choose a single list.
Is there a possibility to show multiple lists??

Best Regards


Moonsoft support 2013-12-10 01:55:48

Trying to set up a field that looks up values from a second table. Set type to "Link to other List" but can't find the "URL list" for the list I'm trying to link to.


Moonsoft support 2013-12-12 06:05:44

Is there a way hide the Search Bar for short lists?

Moonsoft support 2013-12-12 21:55:13

I have a Form Layout of 3 Fields configured to display Front View in Cards. Each card shows Field Names in first column and table data in second column. I would like to hide the Field Names resulting in one column of table data starting at left.

Is there a way to hide the Field Names column?

Moonsoft support 2013-12-13 05:31:28

I've just downloaded the package and have installed the mods and plgs, but the com will not install. I get the error "Error
There was an error uploading this file to the server."

I watch the upload progress in the browser status bar and it does make it all the way to 100%, but then fails.

Moonsoft support 2013-12-13 19:00:58

I'm liking what I see, by and large, so far, but there are some issues (actually more than the title suggests once I'd started writing) I'm coming up against. I downloaded last night so have the latest version.

Project: Multiple dealers from the frontend adding records. They need to be able to add, edit and delete their own records, but not even see other dealer's records. The admin will need to see all, and I can do a "Special" menu item for that to an unrestricted list (that's what I seem to read anyway).

1. I want to populate a field called "Dealer" with the name from the Joomla USERS database. I know that I do that with an SQL query which, I believe, should be SELECT ID,name FROM #___users - please let me know if that's correct. The problem is, when I click ADD an SQL query, the pop up is 1/2 off the screen at the top so I cannot see my entry. This is not the only place I discovered this. Seems like the code centers the box left to right but places the top of the box at the absolute top of the screen, but under the browser menus. It's like the Z height is wrong. It should be centered/centered anyway. See image at 4.jpg. (Please allow posting of images in the forum - this is basic functionality!)

2. I read about a parameter called "Only User Records". Can't find this to save myself - where is it? - NEVERMIND - FOUND IT UNDER THE MENU ITEM FOR LM - WAS EXPECTING IT IN LM ITSELF.

3. The splash page when selecting List Manager from the components menu. Please remove - just plain annoying and adds nothing to the user experience - we already know we're going there. Why add another click to the process?

4. My project will only have 2 pages. A front page which will be a basic welcome page for dealers and anyone else who strays onto the site with a login. The other page will be LM and it's functions. On the main page I want to have the list filter module showing. However, I had it selected for all menus originally, so it also appeared on the front page. The main LM component, obviously, did not appear on the front page. Trying to navigate to the front page in this setup gave the following error:

Warning: require_once(/home/unavaila/public_html/access/modules/mod_listmanagerfilterDShelper.php) : failed to open stream: No such file or directory in /home/unavaila/public_html/access/modules/mod_listmanagerfilter/mod_listmanagerfilter.php on line 17

Fatal error: require_once() : Failed opening required '/home/unavaila/public_html/access/modules/mod_listmanagerfilterDShelper.php' (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/unavaila/public_html/access/modules/mod_listmanagerfilter/mod_listmanagerfilter.php on line 17

5. On the add an entry form it's justification and layout are kind of strange. I have set up my form thus:

Date: ##date##
Dealer: ##dealer##
Client: ##client##
Address: ##address##
City: ##city##
State: ##state##
Country: ##country##
Email: ##email##
Phone: ##phone##
ID: ##id##

but 5.jpg shows how it appears. Labels right justified and as 2 lines, not inline, then ID shoved over to the right. It's less of an issue for this project as it's not for the general public, but I would like it to behave if I use it on a more public setting.

6. Please change your forum to a more user useful/friendly package. No WYSWYG editor, file attachment, search, My topics, etc is very behind the times. Thanks.

7. Adding options/selectable items. Currently this must be done 1 at a time. I added just the states - tedious! There should be a bulk way of doing this - either import from a CSV or being able to drop in a whole list of options at once. One at a time is slow.

8. If you use the search box above the record table or the LM filter module, then select export to Excel (Filtered) that works fine. If you try Export to PDF (Filtered) you get a page "500 - View not found : serverpages, pdf, listmanagerView"

9. If you click the filters icon in the main records box, the column names disappear and you're left with empty boxes to type in. I don't mind the typing but I think the column headings should stay. ( 6.jpg)

Edited by moon_1382 - 13.12.2013 19:01

Edited by moon_1382 - 13.12.2013 19:10

Edited by moon_1382 - 13.12.2013 19:33

Edited by moon_1382 - 13.12.2013 20:19

Moonsoft support 2013-12-13 21:51:26

On the project I'm working on, my client wants notification when a new record is added. Is this possible?

Moonsoft support 2013-12-17 02:35:38

I would like to create a Link URL in an HTML field using an ID from another text Field. Is this possible?

Moonsoft support 2013-12-19 15:01:24

Can I add a list directly into an article? I would like to put two lists in Tabs.

I hope there is something like this?
{ListManager list="Example List"}

Moonsoft support 2013-12-24 19:02:05

Is it possible to set the Search Module to trigger the search on "enter" after typing the search term?

It seems now that that the user must press the "search" button.

Moonsoft support 2013-12-29 13:52:32


the link with more math functions is unavailable so I post my question here.

I want my calculator to do: number1*number2*number3*0,01%

My question is how to add the percent?

for example: $myresult=$aantal*$investering*$winstaandeel/10000

Ore does number 10000 also need dollarsign?

Thank you

Moonsoft support 2013-12-29 18:07:48

My button is centered, while all other buttons in my template are left alligned.

How can I allign the calculate button to the left?

Moonsoft support 2014-01-03 22:46:20

I just purchase your component. Made changes and clicked on 'Save'. System message says it was saved, but everything refreshed back to original. What needs to happen for your component to work. I am running on Joomla 2.5.17

Thank you,

Moonsoft support 2014-01-06 07:20:53

how i can fix it Alphabetical Order field of persian?
i create a project list students.
when i want sort or order lastname use language farsi(Persian),just sort of arabi correct ,but not correct for farsi(persian)
how do can fix it?please help me.

Moonsoft support 2014-01-07 11:59:50

Please find below our comments about some questions received:

'Ratings – The Star rating function is an important feature for the data that I am displaying. Is it possible to turn off the ability of a web-user from changing the star rating(in list view)- and to still have the stars appear in the list/table as a filterable column? My intension is to rate each line myself within the csv & to publish the list/table with fixed ratings. Can the javascript code be modified to stop users from posting a star rating? If so, are you able to make changes to the code & provide the modified file?'

In fact, it is intended to be configurable using acl table, marking the ratings as non-editable fields, but we checked its not working properly for all cases. Please download again latest version and upgrade, and you should see this already solved.

'I have added weblinks into the csv file. This has been done successfully & is displayed in the table successfully, however the impact is that editing the data in the backend does not operate. Are you aware of this? Is there a way of inserting weblinks without affecting editing? If not, then will you be considering to improve List manager in the future?
Soon I will also try and add references to images into the data, but expect that this will cause the same problems with editing data as described in item 2 above. Do you have any comments on this?'

You should be able to edit data loaded from csv same way as it was manually stored, please double check the destination column has the type 'html' in order content can be shown inside html editor to be editable afterwards.

Thanks, regards

Moonsoft support 2014-01-08 06:28:06

When the Ratings are disabled from users in list view ....
1. And the triangle icons are activated to sort the column, the stars do not sort in order correctly.
2. And the filter module is used to say select filter 1-2 stars, all data entries in the table disappear, only the column headings remain behind.

Also, is it possible in the backend to:
A) Set' the ratings. Force the rating to a set value, say 3/5 stars in the managed data?
B) Reset the ratings. Force the rating to zero

Thanks, Karl

Moonsoft support 2014-01-08 14:57:34

I just bought ListManager and the downloaded file on my Mac is named:
I never have seen an extension as a html file!
Obviously, when double clicked, nothing happens.
Please, tell me what to do. I feel very silly about this.

Moonsoft support 2014-01-09 23:52:38

when i try to intall the component from the zip downloaded it send mi a white page, so i unzip it an then try to install the component but it send me this mensaje

JInstaller: :Instalar: Error SQL Función de la base de datos fallida con el número de error 1074
Column length too big for column 'thousand_number_format' (max = 255); use BLOB or TEXT instead

Edited by MSTeam - 10.01.2014 09:21

Moonsoft support 2014-01-10 01:35:13

I am trying to output a result from an equation and keep getting a "division by zero" error. None of the calculations results in zero in denominator. Please help.

Moonsoft support 2014-01-10 13:59:25

I want to have two separate lists that access the same data. One list allows the user to edit his own data in the file and another allows him to see other users data but not to update it. This is done by using a key field associated with each user. Is this possible?
The only way I can do it so far is to export the data to csv and load it into the other list - but this is not really satisfactory.

Moonsoft support 2014-01-11 13:01:18


I have a Joomla 3.0.4 site which I just installed CalcBuilder in my site and downloaded and installed the Business card example, which installed properly...

The thing is it doesn't seem to work whatsoever! I even selected a normal joomla template instead the one I have from rockettheme -in the event that javascript has some issues- but even by using beez3 template doesn't seem to help either.

Please could you view it to see if you can help me?

Edit: It seems to work for now, I don't know what happened... Anyway, if I have any problems, I'll let you know!


Edited by moon_1413 - 11.01.2014 13:27

Moonsoft support 2014-01-13 15:17:52

I created a list and added 2 rows in the backend.
I checked in the frontend if the list did show up and it did.
Then I added a few more rows in the backend. This time the frontend shows the page, the list header (with search field etc.) but it shows a circular image "loading" which doesn't stop. Even after several minutes, nothing happens and no data is shown.
In the backend all is ok and the list shows up immediately.
Any idea?

Moonsoft support 2014-01-14 14:45:37

Is it possible to have the Listmanager "Add" button in a separate module?

I want to be able to place it on the page. (similar to the Listmanager Search module).

Moonsoft support 2014-01-15 06:20:43

The validation script doesn't work on my option list fields (I have selected "Required" in the field configuration). I have set a first option without any value with the name "--- Select ---", but when I look into the generated code, there is still a value associated with this option but the "mv_option" is empty, so I guess that the script should look first if the mv_option has a value, and if not, display an error message, but it doesn't seems to be working that way. Do I have to write an extra script in the JavaScript section? If so, could you give me the code to write?

Thank you!

Moonsoft support 2014-01-22 14:04:28

I would like to send out an email with pdf attachment.
The pdf attachment works ok, however I would like to have the full exit layout screen in this pdf.

Moonsoft support 2014-01-24 11:09:52

Hello, i Have placed header and footer images in the print layout, but they dont show when they show in the pdf view online but dont show in the email when it is sent.

is there any way to do this?

Moonsoft support 2014-02-03 01:27:58

Is it possible to have a page that people can add to the list, however not see the complete list?

Moonsoft support 2014-02-04 08:44:00


I would like to write up my issue in Calc Builder.. The problem is the calculator doesn't seems to work and doesn't calculate.

I made a sample calculator in my website:

I am looking forward to hear anything from you.


Moonsoft support 2014-02-13 13:22:28

Hi there

I've just tried to insert those code into "Exit layout" but it seems that it doesn't work, Can you give me some suggestions ? thank you


Moonsoft support 2014-02-18 19:08:27


The sort arrows do not work for any DATE type column. It just refreshes the same data without changing any ordering.

Can someone help? Or do I need to do something for it to work?



Moonsoft support 2014-02-20 12:59:17

I have two lists ( A and B)
The list A has ID,VALUE, User fields (only own records)

In the B list I want to create a custom option list with the values of A list

I put the sql stament for populate the option list, but the list appears with all the values of A inclusive values from others users,
How can i create the option list with the values of A but only the own records not all records.

Moonsoft support 2014-02-20 23:27:10


I need for my project to add a predefined mask in text input.

I had it in js file ; /www/modules/mod_calcbuilder/assets/js/jquery.meio.mask

Line 142 : 'mymask' :{mask:'AA-999-AA-999' }, ...

But there didn't work.

I see which certain mask not appear in the choice like cpf (cadastro nacional...)

Have you a solution for my problème ?


Moonsoft support 2014-02-23 17:57:13


I try différents tests to add input field in hikashop cart.

I'm very surprise to see the "add cart button" create a product in database. They don't call a existing product and add a caracteristic. And, in that way the product have no taxe...

Can we use another variables of hikashop in the code section ?


Moonsoft support 2014-02-24 01:52:25

Is there any complete documentation?

I'm trying to create my first form:

1. I cannot figure out how to make the form work.
I hit calculate and nothing happens.

2. How do I display results variables? I have this formula:

$OnSiteAutoclaveResults=(0.000212142857142857 * $weight )+3.99

How do I display the value of OnSiteAutoclaveResults either on output or in real time?

Moonsoft support 2014-02-25 21:48:42

How to make an order form with a calculator.

Bought Calc Builder.
How to make a calculator, like understood.
This component but I relied soozdaniya order form for goods.
How to make a form, I can not understand.
Could you help me?
For example, as my test site:
The form did not ustraevaet can with your help and your component I get what you need.

Sorry for bad English, it is necessary to use translation Goglev

Edited by moon_1481 - 25.02.2014 21:56

Moonsoft support 2014-02-28 12:52:47

I've just noticed. Calc Builder ignores meta description data which is set up for menu item. It takes default (site defined) meta description instead.
But it make proper use of title tag which is defined in menu item invoking a calc page.
Is it a bug or I do something wrong?

Moonsoft support 2014-03-01 22:31:50


I created a calculator and all was working great. I used it on a menu page. Once I wanted to test it on a module on a selected area of another web page, started some issues...

Currently I am not able to view the Exit Layout text and variables value on the calculator and I am not able to view the Send by e-mail box, Excel button and PDF button, although all of them are set to Green - YES.

Again, everything was working nicely and I was in the stage of finishing the fonts design on the calculator and would be finished.

PLEASE assist.

Thank you!

Moonsoft support 2014-03-10 08:18:02


Im looking how can i make the list ordered by 1 field value that can be changed later.. example sort by hidden number field for sorting.. I can do this on the older version List Manager under menu option but cannot find it on 3.0 joomla version.

Moonsoft support 2014-03-15 15:34:42

Dear Support

I need to know which file i can modify to fix this css issue my data table in the module are shifted left out of joomla content page .

Moonsoft support 2014-03-17 08:12:18


I have a problem after update to version2... My list not showing on my page which was working fine before the update..

Already re-save module/menu after update and checked the configuration.. and play around with other settings but still the list not showing..

Need assistance tq..


Moonsoft support 2014-03-21 05:36:46

Hello, I have a calculator with a description section that is a textarea. In this section, users enter data such as 3'2" x 3"3" . But as you know, special characters like " and ' escape and cause the data to be truncated. I know how to format numbers because of your examples like "$inline1=number_format($inline1,2,".",",");". How then can I format my textarea field to not escape my special characters?

Moonsoft support 2014-03-23 02:34:13

FireFox and Opera both get the following when accessing (This post was made using Chrome)

Warning: fopen(/home/normales/moonsoftt/public_html/logs/error.php) : failed to open stream: Permission denied in /home/normales/moonsoftt/public_html/libraries/joomla/log/loggers/formattedtext.php on line 237

Warning: fputs(): supplied argument is not a valid stream resource in /home/normales/moonsoftt/public_html/libraries/joomla/log/loggers/formattedtext.php on line 241

Fatal error: Uncaught exception 'LogException' in /home/normales/moonsoftt/public_html/libraries/joomla/log/loggers/formattedtext.php:242 Stack trace: #0 /home/normales/moonsoftt/public_html/libraries/joomla/log/loggers/formattedtext.php(137): JLoggerFormattedText->initFile() #1 /home/normales/moonsoftt/public_html/libraries/joomla/log/log.php(367): JLoggerFormattedText->addEntry(Object(JLogEntry)) #2 /home/normales/moonsoftt/public_html/libraries/joomla/log/log.php(334): JLog->addLogEntry(Object(JLogEntry)) #3 /home/normales/moonsoftt/public_html/plugins/system/log/log.php(46): JLog->addEntry(Array) #4 : plgSystemLog->onUserLoginFailure(Array) #5 /home/normales/moonsoftt/public_html/libraries/joomla/event/event.php(48): call_user_func_array(Array, Array) #6 /home/normales/moonsoftt/public_html/libraries/joomla/event/dispatcher.php(115): JEvent->update(Array) #7 /home/normales/moonsoftt/public_html/libraries/joomla/application/application.php(613): JDispatcher->trigger('onUserLoginFail...', Array) #8 /h in /home/normales/moonsoftt/public_html/libraries/joomla/log/loggers/formattedtext.php on line 242

Moonsoft support 2014-03-27 23:29:21


I have a budgeting calculator live and active, but how do i get the "add" button to include a new section field at the top instead of the button. when visitors start adding 10+ line items they will have to scroll all the time going down, then up to add a new section the down again to enter data.

or better still how to get the "add" button be placed at the bottom

secondly if "calculate" button is pressed, when result is at the top, the page do not auto scroll up to display the result.

Please kindly assist

Moonsoft support 2014-03-31 02:35:36

- using List Manager V2.0.1, Joomla! 3.2.3, PHP v5.3.27
- A list with an "Option List" Type field: "Builder", with a SQL Action defined: "SELECT BuilderNumber,BuilderName FROM Builders"
- Builders structure is:
BuilderNumber - int(11)
BuilderName - text

Adding a record, using the front-end "List Manager Form", correctly stores the builder number for the builder name selected in the drop-down list.

Using the back-end "Load Data from CSV", I specify a valid BuilderNumber but the value does not get written to the record - verified via phpMyAdmin. Changing the Type of the "Builder" field to Number, then CSV loading with the same record, of course, does save the valid BuilderNumber value. Then after changing the "Builder" field Type back to SQL Action, the correct buildername shows up in the back-end "List Data" view and the front-end "List Manager" view.

How do I get "Load Data from CSV" to work? I can do my initial load of 3000 records toggling the SQL Action Number type attribute but that is not viable for my client (or other List Manager customers!)

Thank you

Edited by moon_1371 - 31.03.2014 02:41

Moonsoft support 2014-04-01 07:18:05

- using List Manager V2.0.2, Joomla! 3.2.3, PHP v5.3.27

We have a working view for our list. When we add criteria to the "Default view order by" the list no longer works. When we remove the criteria the list works again! Note: We do not have anything defined in the list's "Front view Config" tab for the "Default list order by".

How can we make this work please?

Also tried to set the criteria in the "Front view Config" tab with none set for the view and that didn't work either,

Edited by moon_1371 - 01.04.2014 07:23

Moonsoft support 2014-04-01 07:37:09

A few view data filter related questions please:

1. I would like to be able to have a data filter on a text field that matches when the field is non-blank. There is not a choice of "Not Equal" (to blanks), so how does one do it? Any thoughts of adding a "Not Equal" option?

2. Are the "Less than" & "More than" filters just for number fields?

3. Is the "Contains" filter a regex pattern to match text? or just a string comparison to find the specified character string somewhere in the field's value?

Moonsoft support 2014-04-03 10:53:02


I have a list to display staff directory. And I have menu to display all my staf..

How can I display only for certain division to show-up? For example when i'm in ICT page, the module only show's ICT's staf.. And so on...


Moonsoft support 2014-04-04 04:11:02

Should I be worried about the 'Show All' option when using a list of 1000's of rows?

I appreciate the importance of letting the user select how many records to show.... but I'm worried about the site performance effect of them showing everything with that 'show all' button (or yes, by typing 1000000 too)

Is that a genuine concern? If so do you think it makes sense to switch to a more basic drop down list of say 10,25,50,100 kind of thing?.... or is there I way I can easily HIDE / DEACTIVATE those options on my site? (I see for example on the back-end you can enable / disable many of the export options - but not these display options... unless I've missed it somewhere. I still want to show the pagination and the search feature)

Thanks. It's only my Day 2 using List Manager but I'm loving what I'm discovering!

Edited by moon_1540 - 04.04.2014 04:20

Moonsoft support 2014-04-05 14:11:09

I would like to redirect to a thanks page after send, can this be done?

Moonsoft support 2014-04-07 03:47:21

I have a text field which gets populated with HTML links like... Event Title

When I try and use this field in the filters using SELECT list option... The select list looks great (so with my example above it shows 'Event Title' as a select option) BUT when you apply the filters it doesn't actually recognise any data.

My guess is the system is converting the HTML to Event Title in the filter and then doing a precise search for that on the underlying data - which means it isn't picking up the data which starts with the hyperlink.

I have also tried changing it to a HTML Editor type field - but seem to be getting same result.

Using latest version of List Manager and Joomla 3.2.3

Moonsoft support 2014-04-07 05:24:39

Question from a new starter!..

I LOVE the look of the filter module and much prefer it to the standard filters on the List Manager views... so I'm hoping to use the module on all my ListManager pages and deactivate the default component filter.

Have I understood it right though - unless you select a specific List Manager table in the module settings the filter won't show up.... I was hoping that it would work out what page it was set to show on and simply work based on the filter settings of that page....

Have I understood that right? If so, is it possible to develop the module to be 'intelligent' to whatever List Manager page it is set to show on?


Moonsoft support 2014-04-08 17:23:42

My list includes a USERID field type which is set to OPTIONAL... If I edit the data at the back-end, it pre-populates the USERID field with the first user in my Joomla Users... and so if I save the record, that's what it accepts.. There's no way I can leave that field blank - I can select any other user... but there are many instances when I want it to stay unassociated with a user.

So this looks like a little bug?

I'm on LM 2.0.3 and Joomla 3.2.3

Moonsoft support 2014-04-11 16:36:04


For the exporting on list manager I can get the export to excel to work fine but when I try exporting to a pdf, the pdf opens blank and I get an error message saying "The selected document can not be opened".

Any ideas?



Moonsoft support 2014-04-11 23:43:45

I'm using the excellent Filter module to give my users their filter options all in one place and I'd like to remove the 'search box' that appears on the navigation bar above ListManager results.

You'll already helped me hide the 'Show #' box on that bar with some CSS - and I tried to follow the same kind of idea to hide the 'Search' box using the below... It almost works BUT it messes up the display of the vital page navigation. Can you help me with the right way to hide the search box, but keep the navigation box intact?

Also - Maybe in future version these hide / show options on the Navigation bar could be configurable - like they are I think now on the export bar? Thanks!

/* Hide the Show All Records on ListManager */
#lm_tool #lm-navbar-collapse li:nth-child(1) div{

Moonsoft support 2014-04-11 23:54:46

A little bug I think.... I'm using the filter module and when it uses a text field, it shows the 'Name' of the field for the placeholder text and not the 'Placeholder' of the field. Hope that makes sense!

If above isn't clear, here's some more detail:

1. I create a Text Field. Called it 'Name' which is the title I want at the top of my list columns.... and put 'Participant Name' in the placeholder field.

2. Then I set that Field to be a filter option in the Filter module.

3. Front-end it appears with 'Name' as the placeholder text and not 'Participant Name' (I tested this by changing the 'Name' to something else and then that is what appears as the placeholder text.... so it seems to be pulling it's placeholder content from the name element of the field, and not the placeholder element of the field.

Fixable?! THanks!

Moonsoft support 2014-04-13 19:40:05

Hopefully you can replicate this minor issue... I'm on Joomla 3.2.3 and the latest ListManager. Using Google Chrome browser.

In the back-end configuration of a list... on the front view config tab, there's a link for 'Date format info'... If I click that the pop-up only half shows at the top of the page and I can't see the earlier content which I think exists (for me it starts at options for the Month setting. I'm guessing there's more info above re: day settings?

Moonsoft support 2014-04-14 03:20:48

I have an issue using the wonderful 'VIEW DETAIL' feature... When I configure a Menu Item View for ListManager there is an "Allow Changes?" option.

I want mine to be "No" but that seems to stop the 'VIEW DETAIL' icon from displaying??? If I set it to "Yes" then the 'VIEW DETAIL' icon is there.

Looks like a bug?

Moonsoft support 2014-04-15 04:04:00

In the Advanced Tab of Joomla Module Settings, I'm used to seeing a Module Class Suffix.

In the LM Filter Module I'm not seeing this. There's something called 'Root Class' in the Basic tab but that doesn't seem to affect the module like the standard Module Class Suffix does.

I use a RocketTheme template on Joomla 3.2 and am trying to add module styling that they have in their CSS: "nomarginall nopaddingtop nopaddingbottom" - It works fine in modules using with Module Class Suffix - but doesn't seem to have any affect using the 'Root Class' provided in LM Filter Module.

Is there a reason why the 'Module Class Suffix' option isn't available on the LM module?


Moonsoft support 2014-04-15 15:55:41

Unless I'm doing something silly I think there's a bug here:

I have a OPTION LIST field which has months of the year.. Name and Value of each option are both Jan, Feb, Mar etc.

In my main list the field is set to be not visible.

Then I create a VIEW of the list and everything works fine with all the data showing at the front-end as I'd expect.

BUT if I then edit the VIEW as I want to and set the Data Filter to 'Contains Jan' or 'Equals Jan' or 'Starts with Jan' then no data gets returned on the front-end screen.

I've tried lower case j but same problem - just no results coming back when I activate that filter????

Can you replicate that issue?

Edited by moon_1540 - 15.04.2014 15:55

Moonsoft support 2014-04-16 01:42:03


is it possible to create a view that shows a list with only future dates in it. Of course I hav a list with a date field.
I read something in another thread with the SQL query NOW() but I could not figure out how this works and where I have to put the query.

Thank you in advance for your advice.


Moonsoft support 2014-04-18 15:32:54


I have 2 questions:

1) is it possible to send me a copy (BCC) of the email that a user of my calculator sends to himself?
2) is it possible to remove the form on the page where you show the results?

Thanks in advance!


Moonsoft support 2014-04-22 12:36:08


Whenever I add a new item to my listing I get this error message.
Notice: Undefined variable: field in /volume1/web/joomla/administrator/components/com_listmanager/models/listing.php on line 874

I have looked at the code which is below but I can not work out what to do to correct, any ideas? I can still add items though.

} elseif ($field=='19' && $isNew){ //Autoincrement

Moonsoft support 2014-04-22 17:28:51


I currently have a contact database which I am converting into list manager as it's on old php code.

One feature I use at the moment is ezPdf which I am able to output to it addresses of certain contacts in a label format.

I was wondering if it is possible to alter the layout output from the export PDF? Rather than lines so I can print on label paper. Where would the php code be to alter this?



Edited by moon_1575 - 23.04.2014 00:14

Moonsoft support 2014-05-12 12:59:19

I bought Calc builder and wanted to install it in Joomla, but didn't work. It seemed that I first had to unzip the zip file. In this zip file there are to new zip files: one for the component and one for the module. And there are two other files.
Question: what do I have to do now to get it all working in Joomla? Do I have to install both component and module, and what to do with the other two files?
I tried to install the component, but got an error message.
Please help me, I cannot find any manual about this part and I really want to use this component in my website.


Moonsoft support 2014-05-12 17:58:45


I created a list with a "multiple option (check)" field.
When I add a filter "checkbox multiple" it works perfectly, entries are displayed when I select one of the filter entries. But when I use a "select" filter I only get entries which have only the selected option.

the multiple option (check) is weekdays mo, tu, we, thu, fr, sat, su
When using "checkbox multiple" filter and selecting mo I get the stores opened on mo, tu, we
When using the "select" filter and selecting mo I get only stores which are opened ONLY on mo, if they are for example mo and sat, they are not diaplayed.

Is there anything I can do about that?

Moonsoft support 2014-05-14 06:10:34

I have two Joomla 2.5 template sites. I have uploaded a version of MS List Manager to one site and it is operating fine but I am unable to the same extension to another site. When I upload the site shows uploading taking place but when I go to use the extension in the menu manager there is no MS List Manager option available? Any suggestions?

Moonsoft support 2014-05-15 16:37:57

I want to extract a price value from a matrix (imported from a csv file).
There are two list options: one to choose the width and one to choose the height.
When both are chosen, click the Calculate button to get the price. This price is already in the matrix, so it's not a real calculation, the price is already there in the matrix.
The variable for the width is called 'breedte', for the height it is 'hoogte'.
The name of the matrix is 'duoprice'.
The code I use to get the right price is: $result=.
This doesnot work, for there is no result.

Question is this: how can I make it work, what code do I have to use or what else is wrong in my calculator?
The (not) working calculator can be found here:



Moonsoft support 2014-05-16 15:19:46

Dear Support!

I would like to know if there is a solution to overtake the calculated price from one form to another form - the final calculated price can be the initial price for the second form.

This would be a very good option for me.

Thank you for your help.


Moonsoft support 2014-05-16 15:56:16

Dear Support!

I would like to know how can I add multiple tabs horizontally in one calculator.
The tab content must get hide, when the client is in the next tab, but the result must be overtaken.

There is a good solution for that?

Here is an example for that:

Thank you for the help!

Moonsoft support 2014-05-18 14:52:59


I like your component and I got almost everything working in the way I need it. Only one question is left:
I have a "multiple option (check)" field for languages. In the detail view I get a list like German French English Spanish instead of German, English, French, Spanish.

Is there a way I can configure a separator? I'd like to have either a comma or a br-tag as a separator.


Moonsoft support 2014-05-19 09:05:44

We need to apply a number format to the calculator in the cost table. This is the format we want to follow:


I saw an old post where you showed someone how to do it in PHP (which we don't want to do since our calc is now quite complicated) - but with the new version you have a section on number format for decimal and '000' spacing - why is there no button to turn this on?

Please help!

Moonsoft support 2014-05-21 09:48:08

thanks for the Calc Builder component, it really works fine.
But: I want to use my own language in the popup result screen. Now it shows 'Result' at the top, then my own information in Dutch and then 'Close' on the button. How can I change the language of that? It is not mentioned in the ini-file, so it has to be modified in another file?



Moonsoft support 2014-05-21 09:53:26


in my result layout I give my visitors the opportunity to save the result as a pdf file. It would be better if a text shows up when hovering over the pdf icon saying something like 'save the result as a pdf file'. Is it possible to add this function somewhere?



Moonsoft support 2014-05-25 09:58:28

Dear Support!

Can you please show me how can I add a tooltip icon with hoover info for a field?

Thank you for your help.

Moonsoft support 2014-05-26 16:20:08

Please can u give me sample data because normally I am used to importing instead of pasting and it's taking so much time doing that and don't seems to be working fine. Is their something I am doing wrong?

Moonsoft support 2014-05-28 08:20:24


I want to display by default more than 10 items, now list manager is showing only 10 items by default, i want to change that to 20 or 30, please let me know from where to change that default limit.


Moonsoft support 2014-06-02 00:40:54

Dear Support!

Where I can change the Add to Cart text to Proceed to checkout?

Thank you!

Moonsoft support 2014-06-02 16:58:15

I want to add Place holder text in a search box showing in top of our list manager, can you please let me know the file name in which it needs changes.


Moonsoft support 2014-06-17 14:16:37


I'm currently experimenting with the calcbluider for VM, but in the documentation I found the part to insert the calculator inside an existing VM product where I have to (install &) enable the plugin called; VM Customer - Calculator, but I'm unable to find it in the list with plugins so I decided to reintall this custom Plugins.

But when I tried to install the file it's missing the XML file to install.

So my question is; is there another way to enable this plugin.

Thanks in advance!



Moonsoft support 2014-06-25 10:39:12

Hi there,

we need a field where you can just put in an url and if you klick on it it opens up in a new window. i have not found a way to do that easily. The people who are using the LM are not IT guys at all.

Have you ideas how to do it or have i missed something?

Moonsoft support 2014-06-26 18:11:09

Just installed LM.
How do I config it so both backend and frontend are displayed in Spanish?

Moonsoft support 2014-07-01 17:02:08


I am having problems with the calculation button. It wasn't working on Internet Explorer and now it's not working on any browser.

Once I hit calculate NOTHING happens.

I know this question has been asked several times but everytime I have read it has a different overall problem/solution.

Any help would be greatly appreciated.

Moonsoft support 2014-07-08 12:16:17

It seems list manager does not work with Joomla 3.3.1 or is there something I am not doing right?

Moonsoft support 2014-07-08 13:37:47

Is it possible for me to automate the figures. So, when figures are enterted into the number fields they are automatically calculated and the total placed in the total column

Moonsoft support 2014-07-11 17:31:53


With List Manager Search Plugin enabled, I get strange results for every search I perform within Joomla Search:
The first three results are LM lists not related in any way with the search terms entered. Furthermore, those results are not clickable.

If I disable LM Search plugin, my results get back to normal.

Joomla 3.3.1
LM 2.0.7
LM search plugin 1.2.9 (tried to find a more recent version with no success)


Edited by moon_1262 - 11.07.2014 17:32

Moonsoft support 2014-07-12 16:30:40

I intend to use List Manager to manage a small collection of items. My client, which is a Public Body, requires me to comply with WAI AA rules.
Is there a way to setup LM in order to make it AA-compliant?
Thanks in advance.
Best Regards,

Moonsoft support 2014-07-15 14:05:52


I am trying to build a payment calculator. The drop down list determines the length and the interest rate is a text box. I can get it to calculate properly for the first item in the dropdown but when something else is selected the length stays the same.

I use an if/elseif statement to the calculation and it appears that when the calculate button is pressed a second time, the coding does not assign which dropdown item is selected.

Hope this makes sense and that someone can offer me some insight.

Moonsoft support 2014-07-17 10:24:21

just installed the component !
Just what I needed ! Intuitive, complete, perfect !!
However, I have a little problem with the header main display, wuth the search and navigation toolbar

All the buttons are not aligned on the same line !
I think it's because of the width of the content area of my Template but that doesn't look very nice.

How can I reduce the spaces between the different Tools to get them aligned on a less than 850px width !
I found it's in mod_listmanager/tmpl/tools.php file but nothing I tried works : I just need to reduce spaces between the different Tools.

A link to a sample :
(in which I'd lke to reduce the space between the search button and the "show" N° items AND align the lines)

If anyone has an idea !?

Edited by moon_1726 - 17.07.2014 11:27

Moonsoft support 2014-07-18 11:03:04

Hi All,

I've got a problem.
I need the PDF file to work properly.

I'm building a form that will show the results below the form.
The results have to be saved in a pdf file.

As i click the button, i only receive an error.
The pdf file seems to be corrupted.

I get this in IE / FF and Safari

Using: Joomla 2.5.22
Template with Vertex framework

Any solutions?

testform can be seen here:

Edited by moon_1727 - 18.07.2014 11:04

Moonsoft support 2014-07-18 12:45:17


When i enter calculate, i get the results.
But above the results the following error is visible.

Parse error: syntax error, unexpected T_STRING in /public/sites/ : eval()'d code on line 1

Any idea how this problem could be solved?

Moonsoft support 2014-07-18 14:33:33

I've got a strange difference in the calculations.

Depending on the selected measurement (Deukformaat) each value entered in the fields below are given a certain response.

The fields I've programmed are working perfectly.
Except for the first one (Motorkap)
When the value is not entered and remains 0
The result should be 0 as well.

Other fields are responding accordingly.

Below the code i'm using for the fields.


case 10:
case $Motorkap==1:
case $Motorkap==2:
case $Motorkap==3:
case $Motorkap==4:
case $Motorkap==5:
case $Motorkap==6:
case $Motorkap==7:
case $Motorkap==8:
case $Motorkap==9:
case $Motorkap>9&&$Motorkap12&&$Motorkap15&&$Motorkap18&&$Motorkap21&&$Motorkap24&&$Motorkap27&&$Motorkap30&&$Motorkap33&&$Motorkap36&&$Motorkap39&&$Motorkap44&&$Motorkap49&&$Motorkap54&&$Motorkap59&&$Motorkap64&&$Motorkap69&&$Motorkap74&&$Motorkap79&&$Motorkap84&&$Motorkap89&&$Motorkap94&&$Motorkap99&&$Motorkap109&&$Motorkap119&&$Motorkap129&&$Motorkap139&&$Motorkap149&&$Motorkap159&&$Motorkap169&&$Motorkap179&&$Motorkap189&&$Motorkap199&&$Motorkap209&&$Motorkap219&&$Motorkap229&&$Motorkap239&&$Motorkap9&&$Motorkap12&&$Motorkap15&&$Motorkap18&&$Motorkap21&&$Motorkap24&&$Motorkap27&&$Motorkap30&&$Motorkap33&&$Motorkap36&&$Motorkap39&&$Motorkap44&&$Motorkap49&&$Motorkap54&&$Motorkap59&&$Motorkap64&&$Motorkap69&&$Motorkap74&&$Motorkap79&&$Motorkap84&&$Motorkap89&&$Motorkap94&&$Motorkap99&&$Motorkap109&&$Motorkap119&&$Motorkap129&&$Motorkap139&&$Motorkap149&&$Motorkap159&&$Motorkap169&&$Motorkap179&&$Motorkap189&&$Motorkap199&&$Motorkap209&&$Motorkap219&&$Motorkap229&&$Motorkap239&&$Motorkap9&&$Motorkap12&&$Motorkap15&&$Motorkap18&&$Motorkap21&&$Motorkap24&&$Motorkap27&&$Motorkap30&&$Motorkap33&&$Motorkap36&&$Motorkap39&&$Motorkap44&&$Motorkap49&&$Motorkap54&&$Motorkap59&&$Motorkap64&&$Motorkap69&&$Motorkap74&&$Motorkap79&&$Motorkap84&&$Motorkap89&&$Motorkap94&&$Motorkap99&&$Motorkap109&&$Motorkap119&&$Motorkap129&&$Motorkap139&&$Motorkap149&&$Motorkap159&&$Motorkap169&&$Motorkap179&&$Motorkap189&&$Motorkap199&&$Motorkap209&&$Motorkap219&&$Motorkap229&&$Motorkap239&&$Motorkap9&&$Motorkap12&&$Motorkap15&&$Motorkap18&&$Motorkap21&&$Motorkap24&&$Motorkap27&&$Motorkap30&&$Motorkap33&&$Motorkap36&&$Motorkap39&&$Motorkap44&&$Motorkap49&&$Motorkap54&&$Motorkap59&&$Motorkap64&&$Motorkap69&&$Motorkap74&&$Motorkap79&&$Motorkap84&&$Motorkap89&&$Motorkap94&&$Motorkap99&&$Motorkap109&&$Motorkap119&&$Motorkap129&&$Motorkap139&&$Motorkap149&&$Motorkap159&&$Motorkap169&&$Motorkap179&&$Motorkap189&&$Motorkap199&&$Motorkap209&&$Motorkap219&&$Motorkap229&&$Motorkap239&&$Motorkap9&&$Opendak12&&$Opendak15&&$Opendak18&&$Opendak21&&$Opendak24&&$Opendak27&&$Opendak30&&$Opendak33&&$Opendak36&&$Opendak39&&$Opendak44&&$Opendak49&&$Opendak54&&$Opendak59&&$Opendak64&&$Opendak69&&$Opendak74&&$Opendak79&&$Opendak84&&$Opendak89&&$Opendak94&&$Opendak99&&$Opendak109&&$Opendak119&&$Opendak129&&$Opendak139&&$Opendak149&&$Opendak159&&$Opendak169&&$Opendak179&&$Opendak189&&$Opendak199&&$Opendak209&&$Opendak219&&$Opendak229&&$Opendak239&&$Opendak9&&$Opendak12&&$Opendak15&&$Opendak18&&$Opendak21&&$Opendak24&&$Opendak27&&$Opendak30&&$Opendak33&&$Opendak36&&$Opendak39&&$Opendak44&&$Opendak49&&$Opendak54&&$Opendak59&&$Opendak64&&$Opendak69&&$Opendak74&&$Opendak79&&$Opendak84&&$Opendak89&&$Opendak94&&$Opendak99&&$Opendak109&&$Opendak119&&$Opendak129&&$Opendak139&&$Opendak149&&$Opendak159&&$Opendak169&&$Opendak179&&$Opendak189&&$Opendak199&&$Opendak209&&$Opendak219&&$Opendak229&&$Opendak239&&$Opendak9&&$Opendak12&&$Opendak15&&$Opendak18&&$Opendak21&&$Opendak24&&$Opendak27&&$Opendak30&&$Opendak33&&$Opendak36&&$Opendak39&&$Opendak44&&$Opendak49&&$Opendak54&&$Opendak59&&$Opendak64&&$Opendak69&&$Opendak74&&$Opendak79&&$Opendak84&&$Opendak89&&$Opendak94&&$Opendak99&&$Opendak109&&$Opendak119&&$Opendak129&&$Opendak139&&$Opendak149&&$Opendak159&&$Opendak169&&$Opendak179&&$Opendak189&&$Opendak199&&$Opendak209&&$Opendak219&&$Opendak229&&$Opendak239&&$Opendak9&&$Opendak12&&$Opendak15&&$Opendak18&&$Opendak21&&$Opendak24&&$Opendak27&&$Opendak30&&$Opendak33&&$Opendak36&&$Opendak39&&$Opendak44&&$Opendak49&&$Opendak54&&$Opendak59&&$Opendak64&&$Opendak69&&$Opendak74&&$Opendak79&&$Opendak84&&$Opendak89&&$Opendak94&&$Opendak99&&$Opendak109&&$Opendak119&&$Opendak129&&$Opendak139&&$Opendak149&&$Opendak159&&$Opendak169&&$Opendak179&&$Opendak189&&$Opendak199&&$Opendak209&&$Opendak219&&$Opendak229&&$Opendak239&&$Opendak9&&$Dak12&&$Dak15&&$Dak18&&$Dak21&&$Dak24&&$Dak27&&$Dak30&&$Dak33&&$Dak36&&$Dak39&&$Dak44&&$Dak49&&$Dak54&&$Dak59&&$Dak64&&$Dak69&&$Dak74&&$Dak79&&$Dak84&&$Dak89&&$Dak94&&$Dak99&&$Dak109&&$Dak119&&$Dak129&&$Dak139&&$Dak149&&$Dak159&&$Dak169&&$Dak179&&$Dak189&&$Dak199&&$Dak209&&$Dak219&&$Dak229&&$Dak239&&$Dak9&&$Dak12&&$Dak15&&$Dak18&&$Dak21&&$Dak24&&$Dak27&&$Dak30&&$Dak33&&$Dak36&&$Dak39&&$Dak44&&$Dak49&&$Dak54&&$Dak59&&$Dak64&&$Dak69&&$Dak74&&$Dak79&&$Dak84&&$Dak89&&$Dak94&&$Dak99&&$Dak109&&$Dak119&&$Dak129&&$Dak139&&$Dak149&&$Dak159&&$Dak169&&$Dak179&&$Dak189&&$Dak199&&$Dak209&&$Dak219&&$Dak229&&$Dak239&&$Dak9&&$Dak12&&$Dak15&&$Dak18&&$Dak21&&$Dak24&&$Dak27&&$Dak30&&$Dak33&&$Dak36&&$Dak39&&$Dak44&&$Dak49&&$Dak54&&$Dak59&&$Dak64&&$Dak69&&$Dak74&&$Dak79&&$Dak84&&$Dak89&&$Dak94&&$Dak99&&$Dak109&&$Dak119&&$Dak129&&$Dak139&&$Dak149&&$Dak159&&$Dak169&&$Dak179&&$Dak189&&$Dak199&&$Dak209&&$Dak219&&$Dak229&&$Dak239&&$Dak9&&$Dak12&&$Dak15&&$Dak18&&$Dak21&&$Dak24&&$Dak27&&$Dak30&&$Dak33&&$Dak36&&$Dak39&&$Dak44&&$Dak49&&$Dak54&&$Dak59&&$Dak64&&$Dak69&&$Dak74&&$Dak79&&$Dak84&&$Dak89&&$Dak94&&$Dak99&&$Dak109&&$Dak119&&$Dak129&&$Dak139&&$Dak149&&$Dak159&&$Dak169&&$Dak179&&$Dak189&&$Dak199&&$Dak209&&$Dak219&&$Dak229&&$Dak239&&$Dak9&&$Kofferdeksel12&&$Kofferdeksel15&&$Kofferdeksel18&&$Kofferdeksel21&&$Kofferdeksel24&&$Kofferdeksel27&&$Kofferdeksel30&&$Kofferdeksel33&&$Kofferdeksel36&&$Kofferdeksel39&&$Kofferdeksel44&&$Kofferdeksel49&&$Kofferdeksel54&&$Kofferdeksel59&&$Kofferdeksel64&&$Kofferdeksel69&&$Kofferdeksel74&&$Kofferdeksel79&&$Kofferdeksel84&&$Kofferdeksel89&&$Kofferdeksel94&&$Kofferdeksel99&&$Kofferdeksel109&&$Kofferdeksel119&&$Kofferdeksel129&&$Kofferdeksel139&&$Kofferdeksel149&&$Kofferdeksel159&&$Kofferdeksel169&&$Kofferdeksel179&&$Kofferdeksel189&&$Kofferdeksel199&&$Kofferdeksel209&&$Kofferdeksel219&&$Kofferdeksel229&&$Kofferdeksel239&&$Kofferdeksel9&&$Kofferdeksel12&&$Kofferdeksel15&&$Kofferdeksel18&&$Kofferdeksel21&&$Kofferdeksel24&&$Kofferdeksel27&&$Kofferdeksel30&&$Kofferdeksel33&&$Kofferdeksel36&&$Kofferdeksel39&&$Kofferdeksel44&&$Kofferdeksel49&&$Kofferdeksel54&&$Kofferdeksel59&&$Kofferdeksel64&&$Kofferdeksel69&&$Kofferdeksel74&&$Kofferdeksel79&&$Kofferdeksel84&&$Kofferdeksel89&&$Kofferdeksel94&&$Kofferdeksel99&&$Kofferdeksel109&&$Kofferdeksel119&&$Kofferdeksel129&&$Kofferdeksel139&&$Kofferdeksel149&&$Kofferdeksel159&&$Kofferdeksel169&&$Kofferdeksel179&&$Kofferdeksel189&&$Kofferdeksel199&&$Kofferdeksel209&&$Kofferdeksel219&&$Kofferdeksel229&&$Kofferdeksel239&&$Kofferdeksel9&&$Kofferdeksel12&&$Kofferdeksel15&&$Kofferdeksel18&&$Kofferdeksel21&&$Kofferdeksel24&&$Kofferdeksel27&&$Kofferdeksel30&&$Kofferdeksel33&&$Kofferdeksel36&&$Kofferdeksel39&&$Kofferdeksel44&&$Kofferdeksel49&&$Kofferdeksel54&&$Kofferdeksel59&&$Kofferdeksel64&&$Kofferdeksel69&&$Kofferdeksel74&&$Kofferdeksel79&&$Kofferdeksel84&&$Kofferdeksel89&&$Kofferdeksel94&&$Kofferdeksel99&&$Kofferdeksel109&&$Kofferdeksel119&&$Kofferdeksel129&&$Kofferdeksel139&&$Kofferdeksel149&&$Kofferdeksel159&&$Kofferdeksel169&&$Kofferdeksel179&&$Kofferdeksel189&&$Kofferdeksel199&&$Kofferdeksel209&&$Kofferdeksel219&&$Kofferdeksel229&&$Kofferdeksel239&&$Kofferdeksel9&&$Kofferdeksel12&&$Kofferdeksel15&&$Kofferdeksel18&&$Kofferdeksel21&&$Kofferdeksel24&&$Kofferdeksel27&&$Kofferdeksel30&&$Kofferdeksel33&&$Kofferdeksel36&&$Kofferdeksel39&&$Kofferdeksel44&&$Kofferdeksel49&&$Kofferdeksel54&&$Kofferdeksel59&&$Kofferdeksel64&&$Kofferdeksel69&&$Kofferdeksel74&&$Kofferdeksel79&&$Kofferdeksel84&&$Kofferdeksel89&&$Kofferdeksel94&&$Kofferdeksel99&&$Kofferdeksel109&&$Kofferdeksel119&&$Kofferdeksel129&&$Kofferdeksel139&&$Kofferdeksel149&&$Kofferdeksel159&&$Kofferdeksel169&&$Kofferdeksel179&&$Kofferdeksel189&&$Kofferdeksel199&&$Kofferdeksel209&&$Kofferdeksel219&&$Kofferdeksel229&&$Kofferdeksel239&&$KofferdekselselAE=$KofferdekselAE+190;
case $Kofferdeksel==250:

Edited by moon_1727 - 18.07.2014 14:34

Moonsoft support 2014-07-19 13:06:50

I have the page scroller correctly displayed on the full website excepted on the List Manager pages where it's over the sliders modules instead of being in the page margin

Can be seen in this sample

Normal :

Normal :

What I mean :

It's not catastrophic but...

Moonsoft support 2014-07-24 08:37:33

Hi, I have three calculators that I set up in version 2.0.0 and have just downloaded the latest version 2.2.5. I am having trouble upgrading in Joomla 2.5 and am wondering if there is an upgrade path I should follow or should I just remove the older verion of Calc Builder and do a fresh install of 2.2.5.?

Would appreciate any assistance.

Moonsoft support 2014-07-24 21:20:14

Hello there,

I reused the code from your demo example#2 (subscribe form) and added matrix values to it. It worked fine, but i don’t need multi options so I changed checkboxes to radio buttons at fields configuration and js.
changed two lines from:
jQuery('#hobbies input...
jQuery('#hobbies input)...

Now I have two problems here:
1. I can’t get the values from matrix to calculate the result (works fine with checkboxes thou). Just wondering what I have to add/change in js tab.
2. I don’t see buttons (or checkboxes before) so I have to manually change from display:none to display: block all the time to see them. I can’t find any css file that might be responsible for that, how to make that buttons to appear?

Thank you,

Moonsoft support 2014-07-29 09:15:57

I am using listmanager 2.0.7 with Joomla 3.3.1

Install does not provide any message (successful of failed) menu items not created in admin, files not created in component directories, and database tables not created.

Any suggestions to the cause? I noticed a similar post but no solution was posted.

Moonsoft support 2014-07-29 23:15:33

Hello, I am sorry I have to open new thread with similar problem like many others but nothing helped.

I want to recieve copy of result to my email but with email of original recipient. I tried to recieve copy of email thi sway:

search for the line
and you can add more lines to add same email to several addresses:

But than my calculations did not work at all.
Now I can recieve a copy of result by filling "Send form results to" in preferences menu but there is no information about sender.

Thank you

Moonsoft support 2014-08-06 14:22:00


I have managed to make translations for the module/component.

but I was wondering, is there a way to also translate the field names, which are displayed as headers above your list (in list-view)?

kind regards


Moonsoft support 2014-08-07 18:45:58


I would like to know two things about your component, is it possible to search in some columns, and the second thing I'd like to know if it is possible in the search field you enter the exact word around and does a few letters, obviously not taking into account accents and capital letters or dashes.

I guess the second answer to the second question is that it is not feasible default.
So my third question is, is that you could develop such options and how rates.



Moonsoft support 2014-08-08 16:52:20

i set a date picker field in calcbuilder, but in frontend i see that when i choose a date it not choosed, the field is always still blank
thank you

Moonsoft support 2014-08-09 05:31:25

I have created a hidden block in the form of a table that contains five fields of type "option list"(1), "option list"(2), "number", "result inline"(1), "result inline(2)."
Also set the price matrix for the fields "option list", "option list". The result of this combination is displayed in the "result inline(1)."
This table works if it contains only one such line calculated.

Perhaps the visitor will want to calculate the price for just two (or more) combinations "option list"(1) - "option list"(2).

But when I add in this table have 2-3 lines with the same fields, the table will not work.

Also, the table does not work if I add these lines via the "section".

How to make a table to work with several of these lines?

Moonsoft support 2014-08-10 07:32:05

Need to get the second row of the table has been shown, if the variable in the first row of the table is greater than zero. How can I do this?

Moonsoft support 2014-08-10 17:25:47


is there an example we can download for your inline results calculation?

That is basically what I am after - except I want to add an additional description field after the Product name. Is this easy to do?

I am a little confused as to how to build the entire form from scratch, so if I could start with your inline form template that would be ideal for me and help me better understand how it all works.

Kind regards

Moonsoft support 2014-08-13 17:42:53

Anytime I try to export a list to excel or PDF I get a blank page or an error.

When exporting to excel I get the following:
Fatal error: Call to a member function detach() on a non-object in /var/www/ftrocks/components/com_listmanager/views/serverpages/helper/PHPExcel/CachedObjectStorage/DiscISAM.php on line 69

When exporting to PDF it just returns a blank page.

Any ideas what I am doing wrong?

Moonsoft support 2014-08-17 01:34:36

please if any one can help me
just want to know how can i change completly style of layout

other change
for radio button, if i click on one of them i can show an image

thank you

Moonsoft support 2014-08-19 11:39:58

Hi, I use your extension as a giftlist on wedding website. There is a list of records (gifts), and website visitor can delete record as he want to buy this gift for newlyweds. But there is a problem, cos there is only one login/password for visitors, so I cant control who reserved this gift. Is there some solution for this? For examle one text field, where the visitor writes his name, and then he can delete the record?

Thanks, Peter

Moonsoft support 2014-08-20 18:27:11

How can I use variables as up limit, down limit and defaut value into number input?

Moonsoft support 2014-08-25 10:01:47

How do I display my list on the Front End? I created it, but when i linked it through Menu, it just shows Search and not the list.
Please HELP me as soon as possible.i'm beginner here.

Thank you

Moonsoft support 2014-08-26 10:03:00

I've got a small problem.

On a new Joomla 3.3 website i've installed the Dutch language.
This is fine and i've got English and Dutch as language.

After installing Calc Builder and creating a form.
It shows the date field in Chinese.

How can i change this?
Or is this a browsersetting?

Please let me know how to solve this.

You can find the form here.

Moonsoft support 2014-08-28 09:13:53

Hi, how can I limit to 2 the number of decimal after the comma?
Example: 51,12% not 51,123456789%

This is the PHP code that I used to calculate percentage:

$myresult=100/$number1 . '%';


Moonsoft support 2014-09-03 11:09:49

Goodday you all,

I have a problem. I want to make a form with Calcbuilder.
But i keep getting the following problems.

The form:

The form is a party reservation system were people can calculate the costs before booking.

It is a 5 step form with different options. after completing the form they can see the cost by clicking the calculate button. After that they can book the party they want. There for they click on the "next" button. They come on the next page where they can add there contacts.

After the reservation they reserve a mail and i reserve a mail.

My problems:

- How can i make a form that gives you a "calculate" button and a "next" button?
- How can i make a reservation button that mails the reservation to me and the client?


I use joomla 2.5
i am coming from the netherlands (excuse me for the bad writing)
If you want i can send you my form so you can take a look at it.


Moonsoft support 2014-09-03 20:26:30

How can I set default value into number input using another number input?

Moonsoft support 2014-09-06 09:27:33

I used 2 calc modules on the same page but only the second one works correctly.
Can you help me?

Moonsoft support 2014-09-08 13:26:19

This is not working for me

I am not getting a result!

Some of the documentation is wrong as well.

Moonsoft support 2014-09-08 18:45:48

Hello. I am sure there was a message about this, but I cannot find it.

I have the following javascript (taken from one of the examples):

// hide divs
// get selected element
var elemSelected=CB(this).find('option:selected').attr('mv_option');
// check to show divs depends on elem selected
if (elemSelected=='opt1') {
if (elemSelected=='opt2') {


How do I insert additional variables here? Let say I have additional field-variable opt3, opt4, etc.

I have tried to insert another field-variable "opt3" this way:

// hide divs
// get selected element
var elemSelected=CB(this).find('option:selected').attr('mv_option');
// check to show divs depends on elem selected
if (elemSelected=='opt1') {
if (elemSelected=='opt2') {
if (elemSelected=='opt1') {

But it does not seem to work. Please help, since i would like to make more fields working this way.


Moonsoft support 2014-09-13 15:51:09

Dear Team,
My Custormer whats that the registred user have more possiblities and the public one not. That means registered user can add and edit some fields more.
But as I configured the ACL in this way, that the registred user can edit every field and the public one not and test it, I find out that the public one can edit by add the record as well ? In the manual "Quick Guide" is deschribed that these not possible ? I saw this in the modul sources helper.php and form.php as well.
Is it generally possible to prohibit user or better groups to edit by adding a record ? Prohibition by editing is possible over ACL. Could you provide a solution for this issue, it is important for my customer. Thank you in advance.
KR, Ayhan Yilmaz

Edited by moon_1625 - 14.09.2014 18:36

Moonsoft support 2014-09-13 15:56:18

Dear Team
As my customer test one of the list which I provide for him, he finds out that is not possible, if he creates an entry ,let say , on the page 3 from 10 , and when he clicks on the refresh fron browser he is landing on the fist page, he find out that the function of paging has not have a memory function, is it right, or is it a configuration issue, i didnt find something to configure on the backend ?
Thank you for your support in advance
kindly Regards,
Ayhan Yilmaz

Edited by moon_1625 - 14.09.2014 18:35

Moonsoft support 2014-09-13 15:58:58

Dear Team,

is it possible to implement a picture upload type ?
My customer is not satisfied with the html editor which is already provided,
The users are able to put any size of picture and large documents as well in the fileds, thank you for support in advance

Kindly Regards,
Ayhan Yilmaz

Moonsoft support 2014-09-13 16:00:22

Dear Team,

is it generally possible to add a counter for each record on the list ?
Database Solution ? Thank you for your support in advance,

kindly Regards,
Ayhan Yilmaz

Moonsoft support 2014-09-15 05:39:58

When I Install ListManager on my J 2.5.4 site from the Extension Manager, I receive this error:

Path does not have a valid package.
Please enter a package directory

I also tried installing from a tmp directory, but that didn't work either.

Can I please get some help with this problem?

Moonsoft support 2014-09-17 13:41:45

So I am trying to use List Manager to create a thésaurus.

A thesaurus entry looks like the following :

Name of owner (the thesaurus it belongs)

Smell description
Sight description
(other senses description)

example of use

And that's pretty much all that I need to display for each entry.

I wanted to use List Manager to make a list of all the entries with a short description... but I can't figure at all how to even screen a simple list I made to try the module...

Could someone tell me how to start this so I can do it please?

Moonsoft support 2014-09-20 12:24:07

I am having problems with the output of multiple option.
This is my code





else {


I have 3 multiple option.
If user chooses option1 only then output should be "option1"
If user chooses option2 only then output should be "option2"
If user chooses option1 and option2 then output should be "option1 option2"
if not then "message2" I cannot make this work

I also need that output"option1" has a href link. ie

Thanks a bundle

Edited by moon_1800 - 20.09.2014 13:32

Moonsoft support 2014-09-22 22:51:18

Hi there!

A short question. The customer need to just put one number into the field "ku".
Now, my pricelist is based on quantyties. Example: buy up to 12, the price is 5; buy up to 24, the price is 4; buy up to 36, the price is 3, buy more then 36 the price is 2.

So how i need to create a matrix table?

With kind regards

Moonsoft support 2014-09-22 22:56:32

Hi there!

How to use yes/no box?
- what is there default value? (Y?)
- how to use this value?
=> Example: if the customer is from EU and outside from my country and has VAT code, then we don't need to add local tax. So how to use this "if" / "else" commands?

With kind regards

Moonsoft support 2014-09-25 05:25:22


Custom Calculator installed and working - thanks heaps to 'Moonsoft' people!!!
Have Virtuemart installed and working and can configure the Product Categories and Products.
Problem: (probably me!!!) How do I get the "Add to Shopping Cart" button to show up after a customer has determined their chosen options. Can't seem to find the Option in From Layout, Exit Layout, Code etc - As said, probably me - it MUST be there somewhere! :)

Ah , the minute I posted this, I found it!! It's in the actual Module configuration!

Edited by moon_1739 - 25.09.2014 05:32

Edited by moon_1739 - 25.09.2014 06:57

Moonsoft support 2014-09-25 08:28:53

The archive does not contain file of plugin

Moonsoft support 2014-09-25 10:59:25

In Virtuemart options, "Type Calcbuilder-Virtuemart mapping": Duplicate VM Product creating a new one.
CalcBuilder generates a new goods in Virtuemart on the mask specified in the "code".
Thus, the site administrator can, if they wish, assign a different name for each new product generated by the various parameters in the code.
In such a case would be much better to the calculator by default not create new goods, if such name already exists in the database.
Otherwise, Database in a month will be exactly the same a hundred items, including SKU and name.

Moonsoft support 2014-09-25 11:08:54

Virtuemart 3 kernel already enough stable.
When will support plugin cbforvm.php?

Moonsoft support 2014-09-26 12:13:09

Dear Team,

Is it possible to configure that we could get an e-mail notifcation , when the user creates an entry in a list. This were a very helpful feature.
The e-Mail should then configurable on the backend.

Ayhan Yilmaz

Moonsoft support 2014-09-30 03:17:49

Need help team - thanks in advance
if user chooses "select" then output should be ""
if user chooses "Weekends" then "4 Weekend Selected."
if user chooses ""Most of the time then"4 Most of the time selected.";

my code is faulty please see

$message4="4 Weekend Selected.";


if($question4=="Most of the time"){
$message4="4 Most of the time selected.";


else {
$message4="4 None Selected.";


Moonsoft support 2014-10-01 08:21:07

Calculator working, Addto Cart Button in place, Virtuemart Categories and Products set up, Calculator Code Generated within VM Options when products added.

Clicking on 'Add to Cart" at front end, heads to VM shopping cart but with the error message "Warning - Error while adding product in cart: no product ids"

Happens whether or not I use Existing or Duplicate VM Products.

If I add Products in the VM Options, code IS being generated but with automatically generated ID's. But which ID's need to sync with Virtuemart?

Can't seem to get this bit working? Am using Joomla 3 / Virtuemart 3.

Many thanks!

Edited by moon_1739 - 01.10.2014 08:22

Moonsoft support 2014-10-02 15:37:12

Hello, i´ve bought your extension, but i think its to difficult for me. Maybe you can help me ...
I like to cerate a table with 3 columns and 15 rows
First coloum: only fixed text (only read)
Second coloum option to enter a number (User can enter 1 to 20)
third column = the result of second column and a fixed number (price)

Third colum - last row = the result of the third colums ...

mayby you have an example

Moonsoft support 2014-10-04 13:22:52


where can i change the text:

You can export your online quote now! Use the pdf link below

Thanks a lot.

Moonsoft support 2014-10-13 15:01:03


I just bought this component but I am unable to import big files by using the CSV-import.
I have created a file, but when I try to import it I don't understand how it works.
I bought this component because of a client who has a file with 15.000 articles (!) which he wants to import in 1 motion. Not by copying every single rule at a time.

How can I import big files by using this component?
Do you have an example of how the file should look like?

Question 2: Where can I create a simular lay-out as you have used in the view with countries? E.g. that you can put the details in a button at the end of a row? And then, by clicking on the icon, you get a pop-up? It doesn't work with me.

Looking forward to you answers.

I am using Joomla! 3.3.6



Moonsoft support 2014-10-22 12:11:05


When inserting a date field in a table in form layout, it does not work for me; the calendar doesn't show up. It works fine when inserting the same field outside the table. I'm using safari browser. See , the section part.

If it is not possible getting the date-field to work inside the table, how do I make the date-field show up on the right of the field "belopp", without using a table?


Moonsoft support 2014-10-22 12:12:26


When inserting a date field in a table in form layout, it does not work for me; the calendar doesn't show up. It works fine when inserting the same field outside the table. I'm using safari browser. See , the section part.

If it is not possible getting the date-field to work inside the table, how do I make the date-field show up on the right of the field "belopp", without using a table?


Moonsoft support 2014-10-22 12:12:27


When inserting a date field in a table in form layout, it does not work for me; the calendar doesn't show up. It works fine when inserting the same field outside the table. I'm using safari browser. See , the section part.

If it is not possible getting the date-field to work inside the table, how do I make the date-field show up on the right of the field "belopp", without using a table?


Moonsoft support 2014-10-22 12:12:27


When inserting a date field in a table in form layout, it does not work for me; the calendar doesn't show up. It works fine when inserting the same field outside the table. I'm using safari browser. See , the section part.

If it is not possible getting the date-field to work inside the table, how do I make the date-field show up on the right of the field "belopp", without using a table?


Moonsoft support 2014-10-30 07:51:55

We have small problem by if function.

We have build a calculator for a fringe benefits
User enter a payment date and amount.
Now calculator need to calculate the taxes.

Tax precent depend from a date. But it dosen't show a result.

With kind regards

Here is a code:

// algandmed (tulumaksu määr, sotsiaalmaksu määr jms)
// kui väljamakse kuupäev on väiksem või võrdne 31.12.2004, siis on tulumaksu määraks 26/74
if($valjamaksekuupaev, siis on tulumaksu määraks 22/78
if($valjamaksekuupaev>31.12.2006&&$valjamaksekuupaev31.12.2007&&$valjamaksekuupaev31.12.2014) $tulumaksumaar=20/80;

// kui väljamakse kuupäev on väiksem või võrdne 31.12.2000, siis on sotsiaalmaksu määraks 33%
if($valjamaksekuupaev31.12.2000) $sotsiaalmaksumaar=33/100;

// erisoodustuse tulumaksu leidmine

// erisoodustuse sotsiaalmaksu leidmine

// erisoodustuse maksud kokku

// numbrite formaat, 2 kohta peale koma, tuhandete eraldaja on tühik
$maksustatavsumma=number_format($maksustatavsumma,2,',',' ');
$erisoodustusetulumaks=number_format($erisoodustusetulumaks,2,',',' ');
$erisoodustusesotsiaalmaks=number_format($erisoodustusesotsiaalmaks,2,',',' ');
$erisoodustusemaksudkokku=number_format($erisoodustusemaksudkokku,2,',',' ');

Edited by moon_1817 - 30.10.2014 08:10

Moonsoft support 2014-11-01 16:24:44

at first let me say that this is a very nice component and its seems rather easy to use. However, I wonder if the following can be done using ListView or if this is not possible yet:

I have a "long" table with many Fields (Name+ Group fields, Adresses+contact info fields, Membership Info fields and Achievements fields). All users of a specific Usergroup should have the right to view and edit all fields.

But: I would like to have three different views of the same list using the same data table in the background:

Name+Group + Address/Contact for Address Management
Name+Group + Membership Info for Membership Management
Name+Group + Achievements for Achievement Management

Ideally I would like to have three Joomla menus where the user can pick which "view" of the list he likes to see. The only difference between the "views" is the number of columns shown, everything else is identical.

I understand that there is a scrollbar if there are many columns but I would rather only show the columns needed for the specific task, that makes it much easier for the users to interact with the table.

If this is not possible: Is there an option to get the edit/delete/... Buttons at the left of a list rather than at the right so that the user doesn´t have to scroll to the end, which is fine for small lists, bit in my case a bit awkward.

Sorry for the long post and thanks for reading.
Any help appreciated.

(I am using the current LM version on Joomla 3.3.6)


Moonsoft support 2014-11-04 23:43:32


I am trying to change the text of the "Add" and "Del"- buttons which users of the form use to add/delete sections. I have tried changing "CB_ADD" "CB_DEL" in the language file in mod_calcbuilder, but the text does not change. Any suggestions?


Moonsoft support 2014-11-05 12:51:31

Is it possible to show the count of the amount of tablerows?

Moonsoft support 2014-11-08 11:47:37


I have successfully setup my list along with some views.
Everything works fine except for one thing: Sorting / Sort fields.

When I Access the Configuration->Frontend Configuration form I can see the Button "Default List sort" (or in my case: "Standard Liste sortiert nach").
However, when I click the button, nothing happens. There is no blank field where I can select the sorting field.

This is strange enough, but I also observe the following behaviour in the "Frontend Configuration" tab: When I select "Show Form in Modal Box" = Yes or "Show Detail on row click" and I hit the save button it says: "List saved". When I go back to the same Dialog the two Settings are back to "No".

Somehow I have the Feeling that my LM Installation is broken. I am using the latest release (2.0.8) on Joomla 3.3.6. I had to do a Manual install as described in the Manual, after the normal install via upload didnt work.
I just reinstalled the component (unzip, upload to temp dir and Install from dir), I got a success message.

Everything else seems to work fine, except for sorting. Even when I define sorting in a view this does not Show the desired behaviour (I could describe this in more Detail but maybe this is only a symptom of the underlying Installation problem.

Any tips apreciated.

Thank you very much

Moonsoft support 2014-11-09 09:28:41

I'm using Joomla 3.3.6 and Virtuemart 2.9.9g
I have made my calculator and tested it in a normal module position which works great.
I'm struggling to get it to appear in the VM product.
I notice that when I go to VM admin Custom Fields and try to edit the CBplugin field the options listed in your guides are not there - the section "select a plug-in" just has text - the name of my calculator.
The options "select a module" and "Text linked to Calculator" are not available.

I can post pictures or grant you access if you would like to see.

Many Thanks

Moonsoft support 2014-11-12 11:08:36

Hi just purchased the calc today. Uploaded fine.

When i go to import a sample zip the page goes blank!
Using Joomla 3.3.6 and latest component i downloaded today. Site is using PHP 3 so no issues there.

Any ideas?

demo Site is on

Moonsoft support 2014-11-13 22:23:51

I have created a multi option list using an sql query and successfully used the value in a calculation for price of my product
I would like to use the option key or name in the description and as far as I can tell from the Quick Guide this should be available as $myvar_name however this is does not produce anything?

Is the _name functionality available for an sql generated list?

Many Thanks

Moonsoft support 2014-11-19 18:41:43

Just wondering how can i set a calculated value and use it in another form which is on the same page??

For example i calcualte with the matrix a value which will be passed to another field of another form. this is done with the

$session = JFactory::getSession();?

If so how exactly is this done??

Moonsoft support 2014-11-22 09:59:13


I have two problems with the pdf generator:

- The pdf can only be generated once per calculation. If I want to regenerate a pdf I need to click the meny item in which the calcbuilder is stored and redo all input. Is this a bug?

- The language file does not contain some useful strings. For example, setting a field to "required"
means a text displays underneath the field when not filling it in: "This field is required". I however cannot find this string in language file, (neither in the module nor the component language file). I have the same
problem with the text in the "close" button displayed in the modal window when pressing "calculate". Where are these strings defined?

Otherwise, thank you for a great extension, very powerful and helpful indeed!


Edited by moon_1796 - 23.11.2014 19:07

Edited by moon_1796 - 23.11.2014 20:16

Moonsoft support 2014-11-24 11:29:26

I install List Manager and put data. Created form Layout.
i created menu to listmanager anth there are no list, no data and button look bad:

you can check here :

I have a mutualised ovh offer.

can you help me ?

Moonsoft support 2014-11-24 17:42:30

Hi, I just recently purchased the List Manager module and it has been working great so far. However I have three question I hope you can help me.

1. How do I allow user to search by press enter instead of requiring them to click on the search button?

2. I enable the List Manager search plugin, but the search result only display the list that contain the data, it doesn't show the content of the list where the data is located. It would be nice if it can display a hyperlink directly to the search result page of the corresponding list that contain the data. Please let me know if it's possible.

3. I have a list of pager number, and I would like to add a html field after each record so it will pre-populate a email with the pager number already included in the sender email address. Is it possible?

Thank you.

Moonsoft support 2014-11-25 15:21:01


Is it possible to get different detail view for same list ?

i find way to have different list view, but always the same detail view.

Thank you

Edited by moon_1879 - 25.11.2014 15:23

Moonsoft support 2014-11-28 14:53:35


I have some questions about the linked lists, I saw there are several options available:

1. Linked List with manual options
2. Linked list with sql options
3. Linked list (sql)

I have managed to get the lists depending to each other by first setting up the option list and the next group using the linked list. With the normal option list i use a variable name like group1 and the next two linked lists group1_linked1 and group1_linked1_linked2.

Now I got it managed working and all the options are changing and can get the ID name and value if using "static" options, if i connect it to the sql database I get this:

1st normal list (not sql):
var linkedvaltmp="";linkedvaltmp=new obj_LinkedValue("12","1_int","interior");

1st normal list (sql):
var linkedvaltmp="";linkedvaltmp=new obj_LinkedValue("1_int","1_int","interior");

Now my sql table has the following structure:

id, location, distance, name, nameabreviation, and value.

id is the normal id wich will autoincrement
location is a number that refers to another table and can be indoor or outdoor
distance is a name that will be used in the 2nd list depending on the 1st list
name is the name of the product
nameabreviation is the short name of the name of the product that i need to connect to the matrix
value is just a number that i use for calculating

How can i get the value inside the linkedvaltmp like:

var linkedvaltmp="";linkedvaltmp=new obj_LinkedValue("1_int_2nd","1_int_2nd","NAME")


var linkedvaltmp="";linkedvaltmp=new obj_LinkedValue("VALUE","1_int","NAME")


var linkedvaltmp="";linkedvaltmp=new obj_LinkedValue("NAMEABREVIATION","1_int_2nd","NAME")

What will be the query for sql? or do i need to add a js somewhere to control this?? It needs to connect to the matrix. The matrix rows uses the nameabreviation to indicate the values.

Edited by moon_1869 - 28.11.2014 14:54

Edited by moon_1869 - 28.11.2014 14:55

Edited by moon_1869 - 28.11.2014 14:56

Moonsoft support 2014-12-02 10:07:17


Sorry, the title would be "Add span inside radiobutton label", but the tag has been stripped and it seems I can't change the title.

I would like to dynamically change the label of a Radiobutton according to the selection (javascropt/jquery), so to see an intermediate result before submitting the form.
Unfortunately the generated html has the following structure:
label - input - Text to be changed - /label

Could you tell me what to change in the code so to obtain the following:
label - input - span - Text to be changed - /span - /label

In this way I could point to the correct tag inside label via jquery.

Thanks in advance


Edited by moon_1868 - 02.12.2014 10:08

Edited by moon_1868 - 02.12.2014 10:09

Edited by moon_1868 - 02.12.2014 10:10

Moonsoft support 2014-12-04 22:51:58

I've created a new upload field with the tag "upload". I've placed ##upload## in my layout, but it doesn't show up. Is there a step I might be missing?

Moonsoft support 2014-12-04 22:53:42

Is there a quick way (short of custom development, which I'm willing to consider) to add the ability to save the calculator result to a registered user's profile page?

Moonsoft support 2014-12-04 22:55:31

Is there a way to fine-tune the styling/css of the pdf output without filling the layout with a bunch of inline styles?

Moonsoft support 2014-12-11 01:27:09


Is there a way to access the matrix values from Javascript?

I have created several matrices inside Calc Builder and it is clear how to access the values from PHP, when submitting the form. But what if one needs to perform some calculations via Javascript and need the matrices values?

Is there a way or is it necessary to recreate the matrices as Javascript objects ?

Thanks for the assistance


Moonsoft support 2014-12-11 22:06:16

is it possible to import a calculator from an xlsx file? Even if I export it from microsoft to something else?

Moonsoft support 2014-12-12 11:43:19

Hello, i am trying to learn how to use your component, and for this i was creating a simple calculator which uses 2 fields and makes a multiplication, when i press the calculate button i get some error codes and the result at the end. The errors i get are the following

Notice: Undefined variable: hk_quantity in C:\xampp\htdocs\karma\components\com_calcbuilder\models\calcbuilder.php on line 373

Notice: Undefined variable: hk_product_name in C:\xampp\htdocs\karma\components\com_calcbuilder\models\calcbuilder.php on line 373

Notice: Undefined variable: hk_product_description in C:\xampp\htdocs\karma\components\com_calcbuilder\models\calcbuilder.php on line 373

Notice: Undefined variable: hk_file_name in C:\xampp\htdocs\karma\components\com_calcbuilder\models\calcbuilder.php on line 373

Notice: Undefined variable: hk_file_description in C:\xampp\htdocs\karma\components\com_calcbuilder\models\calcbuilder.php on line 373

Notice: Undefined variable: hk_pricehikaproduct in C:\xampp\htdocs\karma\components\com_calcbuilder\models\calcbuilder.php on line 373

Notice: Undefined variable: hk_productfields in C:\xampp\htdocs\karma\components\com_calcbuilder\models\calcbuilder.php on line 373

Notice: Undefined variable: hk_product_code in C:\xampp\htdocs\karma\components\com_calcbuilder\models\calcbuilder.php on line 373
result : 7700

what should i do to correct it ?

Moonsoft support 2014-12-20 01:45:21

In the message popup when the send results button is clicked, the EMAIL_SENT_OK constant isn't returning any text, so the alert is blank. I've tried with both the jQuery modal and the stock javascript alert function.

Moonsoft support 2014-12-20 01:48:33

Preferences > Send form results to > Fields to Include

is blank. I assume I'm missing a config value somewhere?

Moonsoft support 2014-12-20 22:23:14


I have a list for member information which includes an e-mail address and website for the member. Can these be formatted as links somehow? They are just text right now.

Moonsoft support 2014-12-24 05:48:06

format the numbers to dollar sign.. how?

Moonsoft support 2014-12-24 06:00:21

how to empty all the records?

Moonsoft support 2014-12-24 08:45:07

how to change the colour scheme background of the list or font colour to match my website theme

Moonsoft support 2014-12-24 08:48:17

how to let the users view the the details of the list by registering their account when they try to click the details and and view only their information base on the list he/her trying to view...

Moonsoft support 2014-12-24 08:57:00

how to total-up the column numbers data i.e sum all the numbers for a particular list that contains numbers kind of data.

Moonsoft support 2014-12-25 05:36:06

is there an easy way to adjust the layout?

Edited by moon_1910 - 25.12.2014 07:31

Edited by moon_1910 - 03.01.2015 03:11

Moonsoft support 2014-12-25 05:46:36

do we need to define the url? where do we get the url since it is a module?

Moonsoft support 2014-12-25 23:05:00


I have just downloaded and installed ListManager on Joomla 3.3.6. The installation has reportedly been successful, but when I try and create a new listing, I cannot do anything but entering a name in the "Main" tab; then, any button I click (Save, Close, "Add field" in the "Fields" tab, or anything else), nothing happens and the Web Console in Firefox shows several different errors and warnings:
- Empty string passed to getElementById().
- SyntaxError: syntax error
- ReferenceError: saveEditor is not defined

Any suggestions?

Thanks in advance


Moonsoft support 2014-12-26 01:06:37

i can't see any function to edit the table list...

Moonsoft support 2014-12-27 15:13:37

how get the absolute url of the list?

Moonsoft support 2014-12-27 15:56:25

How to show the YEAR only in the date field?

Moonsoft support 2014-12-28 13:03:55


can you please confirm that there is currently no support for files upload in LM?

Is there any plan to add that? It would be really useful...



Moonsoft support 2014-12-31 04:12:37

I would like to hide the Add to Cart button is the calculator returns no value.

Moonsoft support 2015-01-03 11:32:26

How??? it is a good idea to give out a message when a user tries to search a record... otherwise they might think the site is unresponsive (not working)

Edited by moon_1910 - 03.01.2015 11:58

Moonsoft support 2015-01-03 11:33:07

why??? i had created the fields with 3 options name then upload the csv with a record containing only 1 name from the option field after the success upload t.. the field did not get updated....

is it a bug..? is there a workaround? because i need to upload thousands of records... updating each record is really a torture...

Edited by moon_1910 - 03.01.2015 11:56

Moonsoft support 2015-01-03 14:09:22

is it possible?

Moonsoft support 2015-01-04 00:24:53

it is not working when i turn off the hide records on first load function..after i had empty my browser cache..
when i turn it back on then refresh my browser then turn off again.. it works..

Moonsoft support 2015-01-05 17:00:59

I would like to specify the reply or sent from email address for when a visitor uses the option to email the calculator results. Right now it is showing that i am sending the calculator results using my personal email address. How do I change this.

Thank you of your time and knowledge.


Moonsoft support 2015-01-06 20:42:20

Just upgraded to ver .12 and now have no front view list displayed. Worked fine prior to upgrade.

Got it fixed - thanks!

Edited by moon_1614 - 06.01.2015 22:33

Moonsoft support 2015-01-07 23:11:00

Hi i am having trouble generating my list i have created it on the backend and assigned it to a menu but when i click on it i get the following error:

Call stack
# Function Location
1 JApplicationCms->execute() C:\xampp1\htdocs\Joomla\index.php:40
2 JApplicationSite->doExecute() C:\xampp1\htdocs\Joomla\libraries\cms\application\cms.php:251
3 JApplicationSite->route() C:\xampp1\htdocs\Joomla\libraries\cms\application\site.php:231
4 JApplicationSite->authorise() C:\xampp1\htdocs\Joomla\libraries\cms\application\site.php:752

Moonsoft support 2015-01-15 07:32:47

Hello, I have problem with Calc Builder on Virtuemart 3.0.2, Joomla 3.3. Module and component work great, but plugin have same bugs.

When I add create product with new price, description from calc Builder on product page display good, but on shopping cart, i dont have description from cal builder or description set previous product and price all product from basket set like last add product. This problem it results from the plugin.

Add from plugin description dont display on order mail.

My page is:

Edited by moon_1462 - 15.01.2015 07:47

Edited by moon_1462 - 15.01.2015 08:11

Moonsoft support 2015-01-23 17:01:33


can i show two different images for 2 different results?
how can i do?


Moonsoft support 2015-01-24 10:23:38


can i change colors or fonts of messages as "this field is required"?


Moonsoft support 2015-01-25 10:22:52

you can check at http:\\
i have check and uncheck the configure at access control... still not working...

Moonsoft support 2015-01-26 07:08:53

the apply and clear text is out of bound on my ipad mini 3

Moonsoft support 2015-01-26 13:52:41

how do i display the email filtered list and pdf button only

Moonsoft support 2015-01-26 16:39:06

hi, and thanks for previous answers.

I have one last question.

when I send my results to my email with "Send form results to" in preferences, send only results in "exit layoyt" but I have the results that come out even with the command "echo" in "php code".
how can I send via email even this result?


Moonsoft support 2015-01-28 17:49:07


My form prints out a stream of html data saved in a php variable ($results).
When I recall this variable inside the Before/After calculation for pdf print this is what I obtain by clicking on the pdf icon:

Firefox: an index.php page is opened, showing the correct values. But if I download the file (mpdf.pdf) then I can't open it with Acrobat Reader because "the file is not supported". In fact, by inspecting the file with a text editor I can see my html code and after few lines the %PDF-1.4% header that should be at the very beginning of the file, according to what is stated on the Adobe site.

Chrome: no file is opened.

IE: no file is opened.

You can see the demo form here:

Could you please let me know how I could solve this issue?

Thanks for the assistance


Moonsoft support 2015-01-29 17:34:17

template provider said.. css comes from the extension... why would you guys set columns to 5 and then give them a width of 41.6667%?

how to fix this.. please..

Moonsoft support 2015-02-05 10:00:14

Dear all, I have the fuction. If epan>2 then I want to see the results in the result layout else I want to have an error message asking user to insert new values. Unfortunately I don't know what to put after "else"

This is the half of the code:

if ($epal > "2") {
else {
I want to see a message error or a pop up error!!!??

Moonsoft support 2015-02-12 10:33:29


I just bought the Listmanager at installed it. It worked all fine until I wanted to display the List, which I've created in the backend, in the frontend.

In the frontend I can only see the filtering tools but no data.

What could be the problem?

Here's the site where it should be:

I also had a problem to save the description of a list. It saves the title but not the description...

What could the problem here be?

Thank you for your help!

Moonsoft support 2015-02-12 14:41:18

I tried to use the export function for the List Manager but unfortunately there will always be an error.

Do you have an idea what the problem could be?

Thank you!

Here's the URL:

Kind regards

Moonsoft support 2015-02-12 19:48:56


I just bought the Listmanager at installed it. It worked all fine until I wanted to display the List, which I've created in the backend, in the frontend.

In the frontend I can only see the filtering tools but no data.

What could be the problem?

Here's the site where it should be

I delete the space characters in the title, internal name etc, but the problem persist.

Please help me!

Moonsoft support 2015-02-17 18:55:40

I would like to insert some code (html, php or js) in the Detail Layout. My pourpose is to show a web page into the modal popup. I create a "URL" field so I am able to show a "link" into the Detail popup (using ##URL## tag). To directly show the page content I need insert this URL in an iframe (e.g.) or use a php or js function. But if I put the command all the row will disappear on save. I tried to use the code view, but is the same, regardeless I put the ##URL## tag or whatever else. Is there a way to insert some code in the Detail Layout windows? Do you have any other suggestion to show a page in a modal popup (e.g. inserting some clickable code in a field)?
Thank you very much in advance.

Moonsoft support 2015-02-19 00:45:53

The dates in my db are all formatted like 2015-02-18 and I need to keep them formatted that way. But in the front end, I'd like them to be displayed differently, such as Feb 18, 2015. Is there a way for the database to store the date in one format, but display it in a different format?

Moonsoft support 2015-02-19 21:53:38

Hello !

I want to create a custom filter function.

I put the code below to components/com_listmanager/models/customserverpages_fl.php which works pretty fine this way.

So now I need to search within the same ID (column) for more than one value.
In other words I need a function which does a search for $valuecustom="xxx" or $valuecustom="yyy" or $valuecustom="zzz"

2.) What pretty ways are there to use the search value from $_GET
--> $valuecustom=$_GET;
Or do you know another easy way to put some parameters to this script?

Thanks a lot for your help!

//this means the filter is 'equal' to your value
$query=$this->_buildQuerySelectRecordsApplyFilterView($id, $idfieldcustom, $valuecustom, $typecustom);

Moonsoft support 2015-02-24 10:48:21


i have 2 calc form in the same page.
both have java code on the page and come into conflict. For example when I go to change the text of the button(with java code) also changes the calculation of one another. I would like to know how I can separate the two processes(instance) in java code.


Moonsoft support 2015-02-24 12:28:59


can you help me a little bit.

i bought your basic version and tryed to get your tool into a product but without success.

in attachment you can find a link for a sample product. (Link: )

i want that it look like in the screenshots



thanks a lot for help

best regards


Moonsoft support 2015-02-25 10:56:20

I know that I can create an HTML field and put ad image into that field. Instead I would like to insert a field "image" that show an image based on user choice. I created an "Option list" field and put "red" on name and "red.jpg" on value (green/green.jpg, ecc.). So the user can choose "red" and insert "red.jpg" into the field. How I can show the img src="red.jpg" tag on front end view? Can you suggest me a strategy working on CSS or php?
Thank you very much in advance.

Moonsoft support 2015-02-26 14:44:49

first of all thank you for the previous answers it all works.

I have the last question for you.I think I have become your nightmare.

Is there a way to add a progress bar after they hit the calculate button? I have a form with 6 image uploads and it takes about
25 seconds to submit. I don't want the viewer to think nothing is happening while it's working to upload.

I found this code but I can not adapt it.

I think you have a more simple way to solve my problem


Edited by alexanderich - 26.02.2015 17:39

Moonsoft support 2015-02-26 18:04:59

I really like LM, especially it's simplicity. It's much better than other extensions I've used. I have a question about db tables. It appears that LM stores all the data/values for all lists in one table called _listmanager_values. On my sites, I will have many lists and some lists have many records (several thousand). I'm worried that this table is going to get very large and if the db table gets corrupted, I'll lose everything for all lists. Is it possible to choose a separate db table for each list? Not the configuration or views, but just the data/values. Or would this be a customization? Thanks.

Moonsoft support 2015-02-26 18:15:35

I'd like to modify certain fields using css, so in the Fields Edit screen, I add a name in the CSS Class area. When looking at my html code, I can see this class on the input field of the form in the back end, but not on the front end list view. Am I doing something wrong? Or is that css class not used on the front end list view? Thanks.

Moonsoft support 2015-02-26 23:13:23


I need your help to figure what I need to change and where to make the input field in calculator I build to look like every other input field we have on our website.


Moonsoft support 2015-02-27 12:57:26

Hi there,

Just installed the component and have installed it locally to the latest joomla build (3.4.0).

The list saves alright, however any fields/list name/description isn't saved.

I installed a previous version of Joomla (3.3.6) and it works fine.

Just thought I'd let you know.

Moonsoft support 2015-02-28 13:46:06

I would like to have the listmanager search module on the homepage of my website and if a user types something to be redirected to the page of the my list. Is this possible? It's very important for me.

Thank you

Moonsoft support 2015-02-28 21:47:56

Hello, I want to make a price calculator for my homepage. Price depends on three variables (length, width and material). Because I have four types of material, I made four matrices. Potential buyers can choose material by an option field. Variable of option field is $material. Depending on the material I want to select a price in one of the four matrices. I use the following code, but does not work: $price=$material. It does not work because the variable of the four matrices is not 'material' but 'wood', 'steel' etcetera (the type of material the customers can choose). Is it possible to make this work this way? Or is there another (simple) option? Thanks!

Update 1-3-2015: I tried to use the switch PHP code and it seems to work out for me.

Edited by jvanmid - 01.03.2015 11:46

Moonsoft support 2015-03-02 10:55:42

I'd like to have a column in a table with status. Status will be a list, with the options Red, Amber, Green.

I'd like to be able to also colour the cell in the table based on the option selected.

Is this possible?

Moonsoft support 2015-03-06 11:45:32


I would like to modify the error message that is displayed when the user gives more decimals than expected. The current message is "Value must contains only 2 decimals". Can you point me to the .php file that generates the message please.

Thank you.

Moonsoft support 2015-03-07 18:20:58

Hello, we moved our website to new server and upgraded from 2,5 to 3,3. But there is something wrong. In backend and frontend is calc not showed good. Please check this -

One thing more - in the backend I dont see any images in CALCBUILDER component, only texts. Maybe there is the way....


Edited by moon_752 - 07.03.2015 18:39

Edited by moon_752 - 07.03.2015 19:18

Moonsoft support 2015-03-09 01:30:24


I need to get out in the form results in some cases my form richiest contact. Normally I use load module function. I tried to load a form of RSForm or formcontact but if you are loaded into "exit layout" form result not work. I believe there is a conflict. also happens to me with a link with jce media pop-up. I use an editor function to release an article in the pop-up after pressing a link but it opens the link in a new page.
Clearly the same code in another part of the site works perfectly.

how do I fix?

thank you

Moonsoft support 2015-03-11 13:32:49

I would like that on load the page show the filter section already open, as after click on "Show filters" button. There is a way to do this?
Thank you.

Moonsoft support 2015-03-11 13:37:35

I would like to create different menu item that show the lists "already filetered". i.e. field availability with YES or NO values, menu item "Available" show the list of records that has availability field set to YES and menu item "Not available" show the list of records that has availability field set to NO.
There is a way to do this?
Thank you.

Moonsoft support 2015-03-11 21:43:36

Hi, I've installed List Manager and it is setup and working. However, the wrapper or frame its in spills over to the right too far. I've tried looking at different css files but none of them seem to have any effect when I make edits.

I'm trying to reduce the width of the columns so it fits better on the page, or decrease the size of the wrapper its in.

Edited by - 11.03.2015 21:44

Moonsoft support 2015-03-15 07:14:42

Is there a way to link a field in the list to a users company name and allow editing only by that user, but as well allow others to choose that company name for later approval (publish) by that user? and/or have multiple users with the same company name and they can edit all records if they are a publisher status or something similar?

Thank you!

Moonsoft support 2015-03-15 07:16:27

Is there a way to link a field in the list to a users company name and allow editing only by that user, but as well allow others to choose that company name for later approval (publish) by that user? and/or have multiple users with the same company name and they can edit all records if they are a publisher status or something similar?

Moonsoft support 2015-03-15 14:52:48

on my site it is not possible to filter the first column. In the sidebar I show the module with the filters, but only the 2nd (Titel) and 3rd (Erscheinungsjahr) column is shown. Where can I add the filter "Autor" (1st column)?

thanks a lot

Moonsoft support 2015-03-17 20:49:48

I try to link to another list, but the values are not saving. I have put in the field on the other list as text, then on the main list it says link to another list and choose the name and field name. When I click save it does not save the name of other list or the field. I also put in the public url, but that didn't change anything either. What could I be missing???

Moonsoft support 2015-03-18 10:25:14

Just installed List manager successfully and created the first list - no problem
Just one question regarding FIELD types
How can I enter a URL as a field type and get a clickable link from the front end?

How to get the list displayed from a MENU and a page?
Can you point to a brief step by step instructions?

Used guide I downloaded V 1.2 sees different from what I see in my admin backend in Joomla 3.4
The issue is from Page 30 - Publishing module
Although it says to create a new Module called list manger when I went to module manger There were 4 different List manager modules already created

Thank in advance


Moonsoft support 2015-03-20 12:19:17

Hello everyone, I picked up Calc Builder yesterday to create a services calculator to my client's site. The original developer has failed to finish this project so I am redoing the site from scratch in Joomla.

I would like to know if anyone has done a similar calculator using Calc Bulider

example site only

Edited by britepencil - 20.03.2015 12:25

Moonsoft support 2015-03-24 14:55:47

I need help here can some please help me setup this basic calculator

looking for columns and rows.

Rows and columns has radio button to select with a specific value for example

5 10 15

the Quantity would go from 1-10

if I select a2 + b3 and quantity 1 for each the total = 25

if I select a2 (quantity 2) B3 (quantity 4) the total = 80
see test cal example image test.jpg

Edited by britepencil - 24.03.2015 15:00

Moonsoft support 2015-03-24 15:09:32

Is there a way to over-ride the default placement of the Email-To, PDF and Excel fields/buttons.

I don't have anything in my exit page (all results calculated inline) and have it set to be beneath the form...which it is but appears at least a couple of lines below.

I'd like it closer/tighter to the form as it may not be noticed unless the user scrolls down.


Moonsoft support 2015-03-25 13:29:11

I have installed several tutorial xml file from your site but when I go to delete the example files are not deleted.

I receive this error


An error has occurred.


Return to Control Panel


clicking the return to control panel takes me back to the Joomla main control panel, navigate back to CalcBulider and the example calc files are still there

Joomla 3.4

Moonsoft support 2015-03-25 16:06:46

I just started with List Manager so this may be a user problem. I have a list populated with data. Now I want to set up a form and a detail layout. I found out that I need to toggle the editor (JCE) from the HTML view to the text view and back then it saves the lists as expected.

How do I provide a linkable field in a list to select a detail form of an individual record for viewing or editing?

So far I am impressed.


Moonsoft support 2015-03-25 22:48:19

The table I am trying to load ends with a field 'active' that is a 1 digit integer field. It will not load into my list. I have tried Yes/No type (0=No, 1=Yes), number field with and without decimal set to 1 (can't find an explanation of what decimal means) and it just will not load.

I am sure this is just a growing pain but I need to solve the issue. Thanks.

Moonsoft support 2015-03-26 02:33:06

How can we change the email (envelope) icon?

It was relatively easy to simply replace images for the PDF and Excel icons but the Email one seems to be styled differently (css I'm guessing)

Is there a way to upload a different graphic (png, gif, jpg, etc..) and have that displayed instead?


Moonsoft support 2015-03-26 04:32:18

Anyone else experiencing an issue downloading the PDF when using Chrome's built in PDF viewer.

I can print, zoom, etc.... but not Save or even right-click and Save As.

When I switch off the built in PDF viewer (and hence use Adobe) it works as expected...but I can't expect all users to do this.

I know it's not just my config as I had a number of other folks try it on their machines and they too couldn't download.

I am running a secure SSL site...not sure if that may have something to do with it.

Any ideas...........?

Edited by satatwork - 26.03.2015 12:31

Moonsoft support 2015-03-31 20:15:16

Please can you direct me to some directions on how to export and then import an excel calculator. Thanks, Jamie

Moonsoft support 2015-04-01 13:26:57

I reviewed this thread but the CalcBuilder user guide does not say how or were to add the code to create tabs with the Calculator

Please solution please not some link to code I will not understand

Moonsoft support 2015-04-08 12:53:27


I would like to validate results.
For example if a result value is greater than 100 i need to pop a window.
I set up javascript on "Executed after calculate execution" tab like this:

var result=cb_getValue('IRR'); //IRR is a php value from code section
if(result>100) window.alert("ERROR");

But it doesen't seem to work.

Is there anything i can do to get result variable?

Thank you

Moonsoft support 2015-04-09 00:15:34

I have a list that is published as a menu item, not in a module. Is it possible for me to have some additional text, images, etc., above the list (below the page title)? I need to add some explanation about the list so the person can understand it. Thanks.

Moonsoft support 2015-04-09 12:18:00

Dear all,
When I click Save, everything from Code disappears! Why?

It also does not save New fields..

Edited by todanai - 09.04.2015 13:41

Moonsoft support 2015-04-10 01:57:20

II am working on c calculator that will have a list of services where a user can select multiple items from the form and will calculate total cost and to book an appointment then send result to email

similar to to my test site built using CodeIgnitor

here you see the calculator on home page select a few items then click book now takes you to calendar and total result

and finally send result to email

The services Calculator has been started need help with understand this....

can the addition 2 steps calender and result form and send result to email be done as one CB calculator or multiple, if multiple can they be link together, if so how would they be linked?

Can a basic calendar be created in CB


Moonsoft support 2015-04-11 17:39:45

I really need help here I found a responsive tab on jQuery it does exactly what I need the problem am having is understand how to use the responsive tab plugin with Calcbulider

here is the list of contents of the demo plugin

CSS folder:

js folder:

additional files


is it a mater of replacing files or what do I need to do please explain the steps

Moonsoft support 2015-04-13 11:09:07


can you please give me advise how to increase height of the cell called pocet ks and pocet na jeden produkt in this calculator?

Regards JIRI

Moonsoft support 2015-04-14 09:35:12

Recently I upgraded the Calc Build and also changed my teblate.
When i try to publish the calculator on my website, either as a menu item, either ar module, or inside an article, other modules which should be shown in a side-a or side-b positions appear below the calculator in the page.
Can you help me?
Apologize for my English

Moonsoft support 2015-04-15 10:24:32

I need to set the background to NO transparent (with an opacity) because we can't see anything of the list result because of my theme background (I tried all of the custom predefined themes coming with ListManager).
So I'd like to get the lists displayed with a black background with an opacity.
Last thing : I have several lists with different theme colors to display
I searched and tried some suggestions in the forum but nothing changed after applying them (eg: list colour scheme thread (24.12.2014)).
I obviously miss something...

Moonsoft support 2015-04-15 14:27:18

I've installed JSN Uniforms from Joomlashine which include jQuery, PHP and CSS

is there a way to connect the results from the form to the JSN UNiform or the JSN UNiform to the CB

The Calculator and JSN Form can be seen here

Moonsoft support 2015-04-16 20:12:30

On detail view date is showing two different fields with different date data.
But on detail view they show as if they are the same field.


both showing the same data (FieldOne data)

I tried to rename the fields, re-enter the data etc, but it doesn't change anything. It is fine on the list view.

Moonsoft support 2015-04-16 20:30:26

How do I add a date-time picker to a CB Cal so user can select a date and time
result can be sent as pdf via email

step 1 would be select services
step 2 view items and results plus select date and time
step 3 send

need to know exactly how to set it up and ASAP


Edited by britepencil - 16.04.2015 20:32

Moonsoft support 2015-04-24 16:40:15

I have made a calc builder calculator (
But i will change the width of the fields.
How and where can i do that?


Moonsoft support 2015-04-27 09:09:38


I've got two questions:

1. How can I push a value via JavaScript from "outside" to an inline result? Using cb_setValue('myvar','NEW_VALUE'); doesn't work with inline results. Do i have to fill a helper field?

2. Is there a way to call calculation via JavaScript?

Moonsoft support 2015-04-29 16:43:54

I have tried to access the Customer area and get a 403 error.

Moonsoft support 2015-04-30 11:09:36

I've created a list and when i click on 'Manage Data', it returned "An error has occurred SQL: 00000, ,". Can you help me?
Thank you

Moonsoft support 2015-04-30 15:03:25


I did not understand how to display a "detail view" for each different view i created (it's a new option).

it always use the general detail layout of the listing menu.

Thank you

Moonsoft support 2015-04-30 22:01:00

Hello again!

I have some troubles with date fields: Having just a single date field in form layout, it almost works: You can pick a date, but if you want to turn to the next or previous month, nothing happens.

As soon as there are more fields, the date picker opens but clicking on any day just closes the picker again.

Do you have any ideas? Shell I provide access to my site?

Moonsoft support 2015-05-04 11:44:00

I'm trying to display my list as a module. When i publish it, it appears only the Search within the module

Edited by mackedoon - 04.05.2015 12:42

Moonsoft support 2015-05-05 19:23:15

Here is the list manager. I have styled the pdf, I can view a detail but I can't figure out how to turn the detail into a pfd. Thank you.

Moonsoft support 2015-05-06 16:43:02


I was wondering if there is support for calculation trigger on enter button press.

Thank you in advance,

Moonsoft support 2015-05-06 17:36:00

If I use the "modal window" as exit, there is a text "RESULT" below the form, also the "print" and "PDF" button appear before calculation.
If I don't use the "modal window" they disappear.

With a reset the "print" and "PDF" disappear.
I've tried in Chrome, Firefox and Explorer, all the same problem.

Is this a wrong setting somewhere?


Moonsoft support 2015-05-10 21:42:08


I installed List manager on my website and when I try to choose a date from the date picker for the date field, the date do not appear in the field,and also not in the frontend.

I tried import by csv, I've set 20/05/2015 and in frontend appear today's date.

Can you please help me with a suggestion?

Thank you in advance.

The website is:

Edited by webgabriel - 10.05.2015 21:43

Moonsoft support 2015-05-11 21:18:36

Hello again!

As you told me, I can force calculation by simulating a click the calculate button:


Now let's have it a little more tricky: I'd like to use "Hide Calculate button and get results on change value of every field" - then, the script above doesn't work because there's no calculate button. Is there a way to combine both functionalities? Do I have to add an onblur event to every input field and fire the calculate click?

Best regards


Moonsoft support 2015-05-12 15:54:00

Me again - I apologize for the number of threads... :-)

Some issues about dates:

1. How can I set Down Limit in date fields to "Today"? I know how to do that with JS but maybe there's a default function...?

2. Is there a way to validate dates or do I have to write my own script? (You can type in sth. like 44.03.2015 without getting an error)

3. How can I throw a custom CB error via JS?

4. Do you provide a documentation of integrated JS functions?

Best regards


Moonsoft support 2015-05-12 15:58:53

I got several calculations in "code" section in PHP. The results are shown as inline results in CB - everything works fine.

Later I need these results in JS. It seems like cb_getValue('...') doesn't work with inline results. Is this correct? How can I access these inline results?



Moonsoft support 2015-05-22 12:53:00


yesterday I bought CalcBuilder and it looks fine.

But, I need to make several different calculation tools, each containing a lot of fields.

The fields in each calculation are very much alike - how can I copy a calculation and then change the values in the copied version ?

Hope you can help me out here - otherwise it will take a lot of work.


Moonsoft support 2015-05-23 05:40:31

How to hide the show and show all button from the public, i can't see any options on the module or access rights, i wanted the top button for pagination only available for the public.

Moonsoft support 2015-05-23 05:42:49

I had add a number field but it totals up the number instead of showing the total no. of record...

Moonsoft support 2015-05-23 09:28:07

Hi Gyus,

I get this error message :

Parse error: syntax error, unexpected '=' in /mounted-storage/home119a/sub005/sc66791-JXWD/ : eval()'d code on line 1

Parse error: syntax error, unexpected '=' in /mounted-storage/home119a/sub005/sc66791-JXWD/ : eval()'d code on line 1

Parse error: syntax error, unexpected '_name' (T_STRING) in /mounted-storage/home119a/sub005/sc66791-JXWD/ : eval()'d code on line 1

Parse error: syntax error, unexpected '=' in /mounted-storage/home119a/sub005/sc66791-JXWD/ : eval()'d code on line 1

Parse error: syntax error, unexpected '=' in /mounted-storage/home119a/sub005/sc66791-JXWD/ : eval()'d code on line 1

Parse error: syntax error, unexpected '=' in /mounted-storage/home119a/sub005/sc66791-JXWD/ : eval()'d code on line 1

Parse error: syntax error, unexpected '=' in /mounted-storage/home119a/sub005/sc66791-JXWD/ : eval()'d code on line 1

What can I have been doing wrong ?



Edited by Johnjuhl - 23.05.2015 10:01

Moonsoft support 2015-05-26 01:48:38

the list won't scroll horizontally in mobile view after i had update to the latest version

Moonsoft support 2015-05-27 12:49:02


there's a html bug in mod_calcbuilder / temple / user.php: There is one "" too much - probably in my setup only...? I've deleted the "" in line 739 and everything went fine.

Also there's a couple of elements having twice attribute "class", e.g. line 714.

Best regards


Moonsoft support 2015-05-28 13:19:52


the menu on our site stopped working properly after the latest update.
As soon as one listman item is open, the menu makes items disappear. It seems to be a mootools - jquery conflict, but I am not sure.

The only thing I know, is when I disable Listman, the menu works perfectly fine.

Please advice?

kind regards,


Edited by Michael28o1 - 28.05.2015 13:26

Moonsoft support 2015-06-01 21:13:00

Hi there - i have just installed the component for the first time and i want to be able to have my list searchable using one particlar list field - i have about 1000 items on the list

when i use filter - the list has to display before i can use the filter options, so that is no good if the list does not show on first load!!

Am or doing something wrong or is there not a way to filter the items unless the list is visible on page load - this become a bit tricky with 1000 items

Moonsoft support 2015-06-04 09:35:46


Can you explain to me the function "Total" for "fields setting".
We can choose "sum", "sum & ceil" etc..
But i don't understand how it work.

I have created a view with a table and i want a column whith total for each row.
Is it possible ?

thank you

Moonsoft support 2015-06-04 12:07:10

If the list has more than 132 entries, Export to PDF does not work.
Lists with 132 entries are still displayed as PDF, from 133 goes nothing.
Export to Excel works

Update !!
I found out, if I delete one of the 16 columns of the list, PDF works ...... ???

Edited by franky466 - 04.06.2015 12:39

New Info !!!

I found it. If I switch the Joomla bug report from "No" to "standard", I get the following error message:
Fatal error: Allowed memory size of 67108864 bytes exhausted (tried to allocate 130968 bytes) in ....

I think the problem is the available memory on my webserver

Is there a way to make the PDF export less memory intensive ?

Edited by franky466 - 04.06.2015 23:29

Moonsoft support 2015-06-05 02:12:03

i have been waiting for this feature for quite a long time to be release...

Moonsoft support 2015-06-05 02:17:45

the pre-loader animation is not running upon first time search. why? i am concern that the visitor might confuse that whether the list are searching the records or the records they are searching does not exist or the list/site simply does not work? and then keep on typing and searching...

Moonsoft support 2015-06-05 06:25:44

please help

Moonsoft support 2015-06-05 08:40:46

site is

Moonsoft support 2015-06-05 11:54:55


problem calculation in array of values.

field: weight , width , length , height .

for quote shipping cost, i have more packages to calculate the total volume and total weight

suggestion ?


## calculate volume for field array.


Edited by bsnline - 05.06.2015 12:01

Moonsoft support 2015-06-06 10:44:02

Hi guys,
how do I make sure, that the Email address typed by the user has got the corret format (



Moonsoft support 2015-06-09 19:22:24

Hi everyone,
on my project I have lists with records that can have a (html) "description" field filled or not.
I need to show the "details" button only on rows where the description exists.
I'm trying to edit javascript so that it checks when the field is empty before adding the "imgdetail" icon (listmanager.js, line 1058), but this has turned out to be quite difficult as all data is loaded and restructured dynamically, using lots of functions and very obscure design patterns.
Honestly, I despise the huge amount of JS this component uses, it's excessive, heavy and hard to customise!

Any hints on where to get data from the row while adding the buttons?

Moonsoft support 2015-06-12 15:10:36


I got an issue with radio buttons and saving inputs in cookies: When reloading the site, all the radio buttons get the attribute "checked" - no matter which option has been selected. Can you help me out?

Best regards


Moonsoft support 2015-06-13 12:36:32

How can I delete the history

Moonsoft support 2015-06-14 19:03:20


Field types "Options Linked list" not work when there are active sections, suggestion please?


Moonsoft support 2015-06-15 11:05:18

Hallo. We bought the list manager. So we install the list manager and connect it with the menü. But in the frontend the listmanger could not found. WHY????

Moonsoft support 2015-06-18 15:03:01

How do I set a field to always show "today" - and not allowing the user to change that ?


Moonsoft support 2015-06-19 19:06:34


how can i change the default size of the textarea in the form view ?

Moonsoft support 2015-06-21 16:44:37


i would add new data in a list. At "front view config" i set "Show Form in modal box" to "yes"
The list has 4 columns (date, text, texarea, htlm-edit)

when i add new data, a modal box opend. i can write data in the first 3 Inputs, but nothing in the HMTL-Edit. And when i click to "save", nothing happens.

No data saving, modal box doesn't close ....... only the "cancel" Button works

you can test it at

you find 2 lists. 1 with "modal box", and 1 without

Moonsoft support 2015-06-21 23:41:19


I just bought Cal builder . After install when trying to import excel file getting error

Fatal error: Call to a member function children() on a non-object in /home/canadar7/subdomains/master/public_html/administrator/components/com_calcbuilder/models/utility.php on line 429

Moonsoft support 2015-06-23 18:22:08

On my page where is listmanager component runnig when I click on "detail view" at whatever row end, only white empty box appear.

Moonsoft support 2015-06-25 12:30:19

Hi, when I enter a string in the search field, it doesn't return any results.

I have set the list to searchable.

Edited by moon_2219 - 25.06.2015 12:30

Edited by moon_2219 - 25.06.2015 12:38

Never Mind, fixed the issue

Edited by moon_2219 - 25.06.2015 12:40

Moonsoft support 2015-06-28 14:13:11


Please help me , code javascript to hide button delete only some section ?
Thank you

Moonsoft support 2015-06-29 23:28:02


field options and option_linked when works in tabs and section ,
option field "Required" not work.

suggestions please

thank you

Moonsoft support 2015-06-30 21:17:14

It's possible to calculate 3 result with 3 button checkout for product hikashop?

Moonsoft support 2015-07-01 20:02:17

Ok, this product is really crazy difficult. does anybody have a mortgage amortization and mortgage payments calculators ready?? I need help!!

Moonsoft support 2015-07-02 16:34:00


Which parameter/code "css" for change alignment button from "right" to "center" button checkout "hikashop" ?

thank you

Moonsoft support 2015-07-04 10:10:37


After calculate execution and show button checkuot hihashop,
if changed value field (main frontend or field in section )
it's possible disabled imput or recalculated form ?

thank you

Moonsoft support 2015-07-06 10:59:17

"button delete" and "button add record" in the section, for change position layout from fixed to customized , how should I proceed ?
Thank you

Moonsoft support 2015-07-08 03:32:59

how to arrange the filter buttons back to horizontal align.

site is

Moonsoft support 2015-07-08 06:07:23


i had confirm it with the template / gantry developer they said its not related with their template.

Moonsoft support 2015-07-13 16:43:17

How do I get a yes/no field to show something else than Y or N in the pdf printed later?

I would like it to show for instance a box with an X or ✔︎ symbol.

Is that possible ?


Moonsoft support 2015-07-14 11:41:51

Hi there,

I want some labels to be hidden in card view so I thought I just had to use CSS class for the fields I want to hide labels.

Unfortunately, I can't find the CSS class I added to my fields in the resulting code.
For example, If I add the CSS class ImageService to my Image field, I don't find it anywhere in the resulting .lmcardcontentblock div.

That makes it a pain to target divs in card view...

Did I miss something ?


Edited by moon_1262 - 14.07.2015 11:57

Moonsoft support 2015-07-14 12:26:20


When i select "list" type, the details are showing but when it was "cards" or "shops" selected, the page is blank without records. What i have done wrongly?

Moonsoft support 2015-07-14 22:11:25

Hi, I'm trying to load values from csv, when it's working it will host ca.2000 records, each one belonging to 1-4 "specializzazioni" (=specializations) .
The required format, according to fields I've put in is:
n.iscr.;Cognome;Nome;Data di nascita;Specializzazione;
The "specializzazione" field is a multiple option (list), already populated by hand with the 6 types expected.
I'm trying to load the file below, it gets imported, but creates empty specializzazione values when it meets multiple values, despite the file being written down according to instructions (For multivalued fields, separate values with a # character, this way: val1#val2#val3).
You can find the file attached here.
Please let me know what I'm doing wrong.
The list you access in the backend under "list data" is not paginated, I can only look at first 20, 30.. 100 or all records... is it only a problem of my installation?
Thanks and regards,

CSV sample:
2221;dfgdfgsa;adsasad;22/05/50;#Cardiologia#Radiologia indirizzo radiologia diagnostica
2867;wxyzdsa;asuiyad;26/10/61;#Cardiologia#Medicina generale

Moonsoft support 2015-07-17 14:07:59

Hi there,

Is it possible to assist me in changing the text on the button that emails records?

I've tried editing the entry - LM_SEND_EMAIL="Email list to" in the language file 'en-GB.com_listmanager.ini', but have had no success.

Also is it possible to pre-populate the email field, as I need to have a voluntary (user activated) notification to admins.

Many thanks in advance!


Moonsoft support 2015-07-17 18:05:12


I am trying to find a way to prevent displaying of field label in card view when there is no data for that field...

I tried using jQuery and :empty selector but somehow that did not work. Maybe because of the way LM loads.

Anybody thinks of another way ?


Moonsoft support 2015-07-20 13:32:49

while adding new row to the list ı am receving a warning.And after see that it also do its job ı mean it adds new row also warning disappear but ı dont want to see warning on the page

Can someone please help me to fix this problem?

Warning: strpos(): Empty needle in ......\Components\com_listmanager\models\listmanager.php on line 317

Moonsoft support 2015-07-21 10:53:55

Hi again,

I would like my client to be able to use plugins within LM fields and specifically MavikThumbnails in order to resize images used in HTML fields.

I found that I have to use JHTML::_('content.prepare', $text); to add plugin support but would happily use any advice as to where I should put this line...

Thanks in advance,


Moonsoft support 2015-07-28 12:51:26

the font size is not responsive in the searchbox module, any future plans for this?

Moonsoft support 2015-07-30 16:50:01


I am migrating a site from Joomla 2.5 to 3.4 and am having some issues with my Calc Builder module.

On the old site I was running version 2.0 on the new site I am running the latest version.

Here are the links to both the old (working) module and the new broken module, the module is on the right side of the page.


Can you please advise why the options and button aren't working.


Moonsoft support 2015-08-01 16:05:17

Hi togehter
The detail Button is not shown in the list on the following page:
When i activate the Option "Show Detail on Row click
" is the detail popup shown.

Could you say what are the proble in this case?


Moonsoft support 2015-08-01 18:38:31


field description product hikashop
i need save in the field "$hk_product_description" result from calc,
for example this but not work ...

$hk_product_description='Description: date:$date - Parcel:$nrparcel';

suggestion ?

Moonsoft support 2015-08-03 12:04:52


I'm currently working on a website and have Hikashop installed.
The products sold (floors) are priced by m2 and sold per package. There is a Product Custom Field (inhoud_pak) which contains the contents per package (different values for different products).

I need a calculator on the product page which calculates the amount of packages needed for a certain lengt * width and set the outcome in the quantity field.

I have the CB Price calculator plugin installed which should be capable of "Use your product custom fields values to build price calculations as complex as needed, you can use all math operators, ranges, use data matrix, databases, or even upload an excel file to perform the operations.".

For the calculation I need the value of the custom field (inhoud_pak) for that product so I can calculate (length * width)/inhoud_pak. That value needs to be set in the quantity field in the cart.

How do I call the contents of the custom field for that product and set the outcome in the quantity field in the cart?

Kind regards,
Eric Beernink
Insitevision Webpublishing

Edited by moon_1824 - 03.08.2015 12:10

Moonsoft support 2015-08-14 00:54:50


J'utilise votre produit depuis quelques temps et je dois trouver une solution pour faire apparaitre le prix sans taxe ET le prix avec taxe.

J'ai réalisé un module qui fait le calcul, le bouton ajouter au pannier est bien présent, je clique sur le bouton et le produit apparait bien dans mon pannier mais malheureusement le prix hors taxe et toujours identique au prix avec taxe.
Si j'utilise un produit de mon catalogue Hikashop, les prix avec et sans taxes apparaissent correctement mais dés que j'utilise CalcBuilder, ces 2 prix sont identiques.
Merci pour votre aide.

Moonsoft support 2015-08-23 18:38:05


Silvia Martín has been helping me so far and she has asked me to post any further questions on this forum.

The type of form is to calculate the cost of an arbitration service in the case of a dispute.

The requirement is to have a form with one data entry field. This field could either be:
- a numeric field with the $ amount under dispute
- a drop down list of ranges of amount under dispute, e.g., $550 - %500, $5001 - $10,000, etc

Depending on the value entered the cost of the arbitration must be found from the mapped spreadsheet.

(Silvia Martín has the spreadsheets and the output required as it is not possible to add them directly here).

Is it better to use a single value field or a selection list as the input and how do we map this value to the cost of arbitration amount in the spreadsheet ?

Hope that this request is clear - Silvia Martín has already confirmed in our pre-sales conversation that it is possible.



Moonsoft support 2015-08-23 18:40:48

Parse error: syntax error, unexpected end of file in /opt/lampp/htdocs/borouj/components/com_calcbuilder/models/calcbuilder.php(370) : eval()'d code on line 1

Moonsoft support 2015-08-24 12:53:32

I am making the inline results box to be viewed in form all time and i need to add a placeholder text .. is there a way i can do that?

Moonsoft support 2015-08-24 22:52:08


I installed List Manager on Joomla 2.5.3. I gave it a name, description and added 3 fields.Each field has an internal name (no spaces or weird characters). Each field is required. I added a key field. I created a view and added each field and made sure "Visible" is checked. There are no filters. The Display View has three fields. The form layout screen and detail layout settings are all identical. I went into Manage data and added some records manually.

On the configuration: List table. Under Show/Hide, everything is Yes.

I created a menu item that goes to a page that uses this list. Nothing appears. Nothing is searchable.

**This is not a public site, so I can't give you unattended access.**

Please help, I feel like this should be so simple. Thanks!

Moonsoft support 2015-08-25 18:29:28

Hola a todos, he tratado de instalar List Manager y no se ha podido desde el Gestor de extensiones. Necesito una guía para poder instarlo más comprensible en español si es posible.

Gracias !

Moonsoft support 2015-08-26 00:37:51

Hola, tengo un formulario diferente al componente listmanager y quiero saber cuando guardo un dato en ese formulario (distinto al de listmanager) puede verse al instante de refrescar el sitio, los datos de la lista del Listmanager están hechos con una consulta de la base de datos del formulario que es distinto al componente de ustedes

Moonsoft support 2015-08-31 23:27:14

Hi, I am getting:

Parse error: syntax error, unexpected '=' in /home/arbitrate/public_html/components/com_calcbuilder/models/calcbuilder.php(407) : eval()'d code on line 1 at

What can be cauaing this problem?



Moonsoft support 2015-09-02 12:45:10

Hi, I'm using LM 1.2.5 on Joomla 3.4.3
I've downloaded the italian translation, then put lang files where they belong, after converting them to UTF-8 and verifyied everything was correctly translated and working.
All was ok, but I realized that in some way, YES (on admin buttons) was not translated, despite being already defined by
in it-IT.com_listmanager.ini and it-IT.com_listmanager.sys.ini in the admin/lang directory.
I've check in administrator\components\com_listmanager\views\listing\tmpl\edit.php and Yes is actually defined here:
echo JText::_('YES')

So, I've added
to the .ini files
Result: language reverts to english .ini
Have you got any idea to solve this thing?
Well, actually putting things like this
echo JText::_('SI')
would solve, but I don't think it's a future-proof solution...
Please, help me as soon as possible

Moonsoft support 2015-09-03 20:01:37

Hi, as you can see here
the filter module appears as it should, instead here
it doesn't show up, the same happens for the other alphabetical views.
Would you please suggest me if there's a way to make it show up?

Moonsoft support 2015-09-08 07:18:13


I'm working on an online shopping form for a butcher that sells his products in decimal quantities (such as 1.5kg or 2.65kg of meat).

I've set up the form using the Inline results example and added more onto it. So far they have over 90 products and when an order is placed, we are sent an email listing every product on the form regardless of what was ordered.

Is there a way to stop any items that weren't ordered from been placed on the email?

The only other way of doing this would be to set the whole thing up in HikaShop but then we won't be able to use decimal values when entering in the quantity that you want to order.

Is there a way that HikaShop can accept quantities that contain a decimal point?

Moonsoft support 2015-09-14 18:38:40

Hi togehter
Do you now, why the rating system are not working on the following page?
I allowed it with public acess, but i can`t do it


Moonsoft support 2015-09-15 11:17:19

I can't seem to find sorting options anywhere...

Moonsoft support 2015-09-17 01:20:37


I have a form with some number fields in it. I need to validate the field value based on the value of the other field.
For instance, retiring age should be greater than current age.

Is that possible? If yes, how can I do it?

Thanks in advance

Moonsoft support 2015-09-17 13:36:21

I want to know how i can create alphabetical list

Moonsoft support 2015-09-18 01:15:48

I biuld many form with calc builder using excel with no problem.
However, I am running into an issue with one of my forms that use an excel files to process the calcultion.
The results I got from using the excel file with similar data is different from the one I got with calc builder. the later does not make sense at all.
All the resultat with the same excel file are identical to calc builder results excel for the results using the "rate" fonction with seems not to work on calc builder.
I checked the data many times but still different results.

Please let me know how to solve it.

Moonsoft support 2015-09-18 20:19:18

I have been trying to use the Joomla menu system to open a list for entry and it does open the list. However if I click the 'Cancel' button the form remains on the screen. Shouldn't it close the page? And the 'Save' button behaves the same way - it shows the new data but remains on the screen.

What am I missing?


Moonsoft support 2015-09-20 12:28:07


I need to check that input value in a text field (which is number) to be greater or equal the value (number) of other inline field.

Moonsoft support 2015-09-20 12:29:54


I need the initial value of a text field to be equal to an inline field value as a start till user changes its value.

Moonsoft support 2015-09-23 02:16:39

Hi there,

Im using Joomla 3.4.3 with latest version of List Manager.

I created a list but adding itens in frontend doesnt record data.

Please, try this:

What can be happening?

Moonsoft support 2015-09-23 12:20:58

Hi from Italy.
My setup: Joomla 3.4.4, Calc Builder Extended 3.0.10, Virtuemart 3.0.10.
Discussion: VirtueMart integration, Duplicate VM products.
In my VirtueMart I check my VM admin and I see the new instance of the product but not with the calculated price and not be added to the cart.
What can I do?

Moonsoft support 2015-09-25 01:01:41


I have setted Default list order to field "Mês" (Month) but doesnt work, even if I use field options with numbers (like 01 - Janeiro).

The list is always ordered by day when I set deafult list order to month, but with any other field, the default list order works fine.

Id like to set default list order by Months (first criteria) and days after months, like this:

01 | January
18 | January
22 | January
05 | February
12 | Feb...

How can I do this?


Edited by geniusdesign - 25.09.2015 06:07

Moonsoft support 2015-09-25 01:10:03


I made a backup of a list to import in another Joomla instalation but when I import, data doesnt comes. What am I doing wrong?

Moonsoft support 2015-10-05 16:41:37

My users should be able to search the list, but not add to them. How can I remove the Add button but show the search bar?


Moonsoft support 2015-10-06 11:15:09


I just updated ListManager from 2.1.5 to 2.2.0 and my added classes are not added anymore :

For example, my field 'Nom du service' has a Css class ' nomService' that I use to style the lmcardcontentblock div within my result page.

It used to give that html:

div class="lmcardcontentblock nomService"

But now, the added class is nowhere to be seen :

div class="lmcardcontentblock"

I checked the corresponding fields in backoffice and they still have the class names.

I fear I have to revert to the previous version or to re-add my records.
Please, if you got another solution.


Edited by moon_1262 - 06.10.2015 11:16

Edited by moon_1262 - 06.10.2015 11:16

Moonsoft support 2015-10-06 22:41:53


We are getting this here:

this is just a simple form without any calculations spreadsheets - we just want to use the PDF option.

What could be causing this error?



Moonsoft support 2015-10-07 17:45:10


Is it possible to automatically generate and send a PDF to a person within the organisation following the submission of a from by a customer ?



Moonsoft support 2015-10-13 10:30:17


How can i change the language to Swedish? I need the fields "This field is required." and the "Reset button" to get translated.
If i want to make overrides, which constant do i use?

Moonsoft support 2015-10-13 10:30:33


How can i change the language to Swedish? I need the fields "This field is required." and the "Reset button" to get translated.
If i want to make overrides, which constant do i use?

Moonsoft support 2015-10-13 12:03:02


Uploaded CSV data and the form already looks great. However, I now like to move one column before another field.

Now it reads: Company, Location, Country but I like to change the order to Company, Country, Location.

How to change order of fields (backend).

Stein Docter

Moonsoft support 2015-10-20 12:42:11

I have changing list on daily basis. Is it possible that records are automatically uploaded through SQL query or is there any possibility to export values directly from SQL server. Thanks in advance.

Moonsoft support 2015-10-21 15:50:37

I am wanting to move two items on the list manager module:
1. move the pagination buttons to the bottom of the list (where the export buttons are).
2. move the export buttons to be above the filter area (where the pagination buttons are).

Could anyone help me out with what file(s) I would need to modify to make this happen?


Moonsoft support 2015-10-21 21:04:20

Is it possible to require a user to filter a list before being able to export?
I have more than 30K records and if they export the entire list, it times out. I would like to limit them being able to do that.

Moonsoft support 2015-10-24 14:17:51

I would really like to see an example of adding Calc Builder to an existing List Manager implementation. Here are some of my questions:

Will CB use existing LB tables?

How is the calc routine initiated?

If I add CB to an existing LM site will I see the CB prompts in LM?

Is there a video of CB being added to an existing LM site?


Edited by bwls103 - 24.10.2015 14:18

Moonsoft support 2015-10-27 13:54:20

I tried posting to that forum but I did not have the ability to post there.
I was wondering if there is a way to implement the filtering for the table manager similar to how list manager does it.
My problem is how list manager is set up and inserts data into the database. I have, at the moment, 30K records and each record has 64 fields. This, when displaying/exporting records, it is extremely inefficient.

If having the search/filter capability built into table manager, what would be a cost to have you build that?

Moonsoft support 2015-11-01 23:44:23

my Question is how can i set a YES/NO box as default checked.

Moonsoft support 2015-11-04 11:12:29

Hi Moonsoft,

I am trying to do a calculator that user input his amount of money and choose the 2 currencies to calculate
his amount for example: I want to convert MY AMOUNT OF 10000 (textfield) FROM euro (dropdown ) TO dollar (dropdown )! This is one piece of the code:

If (var1==eu && var2==do){

else If (var1==eu && var2==eu){

else If (var1==eu && var2==le){

else If (var1==eu && var2==pa){

The result don't show in the frontend after i click calculate!

Please help 'cause it's urgent!
Thank you in Advance!

Edited by bigmediaexpert - 04.11.2015 11:27

Moonsoft support 2015-11-04 11:20:24


I am not understanding Javascript events: cb_getValue and cb_setValue, or at least not observing what I expected. I need to do calculations, but just for testing purposes, consider

averageSalary (Type: Number)
benefits (Type: Number)
annualSalary (Type: Number)
monthlySalary (Type: Number)

Javascript events, Executed before calculate execution

//Get Value from Field
//var result=cb_getValue('myvar');
var averageSalaryResult=cb_getValue('averageSalary');
var benefitsResult=cb_getValue('benefits');

//Set Value from Field

When I enter a number in averageSalary and benefits, I expected to see the numbers in fields annualSalary and monthlySalary. However, the text "averageSalaryResult" and "benefitsResult" is shown.

Moonsoft support 2015-11-06 09:42:11

I'm struggling with the concepts on the EXCEL import in Calc Builder Extended

Is there a step by step guide?

i'm an experienced Joomla user andI have a sheet that I need to replicate on a page, but I can't get started.

Moonsoft support 2015-11-06 15:08:26

How can I change the up limit and te down limit of a text area when i choose a value from a dropdown list?

Moonsoft support 2015-11-10 08:44:17

When I type in pre-form HTML and press save, the text disappears. I have tried to import the BMI calc from your webpage. Here the pre-form HTML appears, but I cannot save any changes.

What can I do?

Moonsoft support 2015-11-11 04:56:56

Hi, I have version 1.1.1 installed on a Joomla 2.5 site and wanted to migrate to a Joomla 3 site. I just purchased a new subscription. How do I go about migrating with List Manager? How do I upgrade without losing current lists plus information?

Moonsoft support 2015-11-11 11:19:03


I just bought/upgraded the listmanager 2.2.2 component to get new support. I added the List Manager Form to my menu but noting is showing up. I made this theme with Themler. List manager has always been compatible with Artisteer templates.

The List Manager Detail is working correctly.

See links below:


All settings are default and permissions are set for public access.

Moonsoft support 2015-11-11 20:37:31

Hi, been using this for a long time but it was time to upgrade before moving site to new server.

The install of 3.0.9 gave an error over the top of 2.0

Let me know what to do, i exported what I needed for one form from old site.


Edited by moon_2373 - 12.11.2015 00:37

Moonsoft support 2015-11-12 14:34:24


Great product but there is one thing (front-end Editing) i did not get to work.

I have created a list in the component
I have created a view
I have set under super users all the marks
Set some configurations to show it as a card
I have created a menu item and select the view
Allow changes is set to YES
I login into Joomla with my super-user account
I go to the created menu link and press the
A pop up is showing with the buttons and and the content is empty

I don't see any fields which i can change, what am i doing wrong?


Edited by berd - 12.11.2015 14:34

Edited by berd - 12.11.2015 16:44

Edited by berd - 12.11.2015 16:44

Moonsoft support 2015-11-16 18:39:51

Hi I need that a calculation not to be done unless user enter value in a specific field first. Thanks

Moonsoft support 2015-11-18 17:46:41

Hi guys,

Backend: Configuration: Front view config: Date format: y-m-d

then: Backend: Manage Data: New

--> my field of type "today" appears filled with 15-11-18

Quite okay.


Configuration: Front view config: Date format: yy-mm-dd

then: Backend: Manage Data: New

--> my field of type "today" appears filled with 1515-1111-1818

Could this be a BUG?


Edited by Charly2015 - 18.11.2015 17:47

Moonsoft support 2015-11-19 09:42:40


1. I'd like to know if there is any possibility to hide the name of the list, displayed in the front-end.

2. I've also selected the "Strip Table" (and the border) option but all the rows of the table are still having a white background and it has no borders at all (only row separator lines). Any solution?

I'm using the latest Joomla 3.x version and the Purity III theme.

3. Another question: I have 3 filter fields on a list. Is it possible to make them "linked"? By linked I mean that if I select a value in the first filter field, the other 2 must show only the possible values related to the first one


Edited by moon_2372 - 19.11.2015 10:54

Edited by moon_2372 - 19.11.2015 10:54

Edited by moon_2372 - 19.11.2015 10:54

Edited by moon_2372 - 19.11.2015 10:55

Moonsoft support 2015-11-20 11:00:57

Hi guys,

Backend: Configur Access Control: all ticks in row "public" removed.
Show/Hide Front sections: Toolbar visible

So, public visitors of the site can view the table es well as the edit tools.

Unfortunately, all the tools still work!
Public users CAN add, edit, delete records, despite the ACL config.

Am I missing something?

Description of use case:
One group of users creates records
Another group of users is allowed to modify just one field

More testing: Nothing I do using ACL has any effect in frontend :-(
The only thing that works is Access Control option in ListManager Menu item, using AccessControl "See all/edit only user records"
But that is not what I need.

Thanks for your help,

Edited by Charly2015 - 20.11.2015 12:34

Moonsoft support 2015-11-20 11:08:47

Hi guys,

with v2.2.2 I created a listing with description.

After the update to v2.2.3 I can no longer edit the description of that list. The editor with the old text appears, I can modify it, but after "save" it is back to the old text.

When creating new lists, the description disappears once the "save" button is pressed.

Possibly related observation:
When I am in the list create/edit mode and press "save", I see this message that says "do you really want to quit this page?" (I see it in German, so it is a rough translation).

Normally this message only appears on certain web pages, when I try to leave a not-yet-completed form without pressing the "save" (or similar) button.

Funny: Adding/changing "Fields", which is part of the same "Listings:Edit" page DOES work.

More precise bug testing:

The "do you really want to quit?" warning does NOT appear when
- entering a new list name + "save"
- adding new fields + "save"
It does ONLY appear when
- entering a description for the list + "save"

So, this warning and my described bug are linked!

...and the bug was already there in v2.2.2

(Don't ask me how I ever managed (just once) to create a list that DOES have a description...)

Any hints?


Edited by Charly2015 - 20.11.2015 11:52

Edited by Charly2015 - 20.11.2015 11:55

Moonsoft support 2015-11-24 00:18:57


I have changed the Access Control option for one list to "Only user records" and it works OK.

I'd like to still have that option enabled but also have another category of users that could see all the records). How could I achieve this?


Moonsoft support 2015-11-30 18:30:52

Hi guys,

I have an AutoIncrement number in my listing (using LM 2.2.4).

When entering new data in Frontend: incremented number appears
When editing data in Frontend: number stays the same as before (good!)

When entering new data in Backend: incremented number appears
When editing existing data in Backend: number disappears (field empty)

This means, as an Admin I cannot modify this table in the backend without destroying the autoincrement number.

Any ideas?


Moonsoft support 2015-12-03 06:48:03

I am using List Manager as a Staff Telephone list with 8 columns displayed. Some of the columns do not display well as they wrap the text (e.g. mobile number). Is there a way to change the column widths in both the View mode and the Exported PDF mode, or alternatively a means for changing the font size, to allow the field to display correctly (i.e. on a single line)?

Moonsoft support 2015-12-04 03:43:18

Within the Detail layout is it possible to create a link with a field. I am displaying an email field in my Detail view, and it would be beneficial if the users could just click on a link and launch an email to that user.

Moonsoft support 2015-12-04 13:38:41

I have a problem when exporting memberlist to excel.
I have multiple option (list) 3 places.
But when exporting list to excel i just get numbers on the places where the it should appear data.

I have a multiple choice for choosing Student or Doctor.
I added 2 actions with:
Name: Student
Value: Student
... and the same for field Doctor.
When i export the list to excel i just see nubmers instead of the choosed fielddata.
Where do i go wrong?

Also: Is it possible during export to excel to see the field name as titels in excel ? (Surname, name, email...etc)

Hope for quick respond...!

Moonsoft support 2015-12-11 10:40:37


I have a list with a non visible field. I've set the properties of that field as following:

1. Exportable: Yes
2. Include in Search: Yes
3. Visible: No

Is it possible to have this field exported into PDF/Excel files although it's not set as Visible? (at the moment, I don't see it in the PDF/Excel exported file).


Moonsoft support 2015-12-14 18:13:42

Hi, i have installed list manager in Joomla 3.4.5 but when i try to access a blank page is showed.

Can somebody help me?

Many thanks.


Edited by musso - 14.12.2015 18:13

Moonsoft support 2015-12-17 13:18:43

I have an Excel calculator that runs over 8 pages in sheet 0 and 2 pages in sheet 1. Both sheets are named and sheet 0 is both input and output while sheet 1 feeds certain constant values to sheet 0 and does calculations that feeds back to sheet 0.
Any suggestions on how I should start this off? There are quite a lot of specialized calculations involved and most of it is inter dependent.


Moonsoft support 2015-12-22 18:45:29

Thanks for the extension
When i load a calc module in an article (see: the calculator does not work.
The same calculator works when i create a menu item (see:
Can you help me?

Moonsoft support 2016-01-02 21:06:15

Hello- I am trying to write the code to calculate two variables after the user selects from 3 option fields.

When the user selects from>>>


Then when they press calculate, then I want it to display VARIABLE 1 and VARIABLE 2.

I have this set up in a matrix with the following columns.

Screen Shots can be sent if you give me an email address.


Moonsoft support 2016-01-04 18:07:41

I just purchase the calcbuilder, I have spreadsheet calculator, how can I import, I dont purchased extended one, do i need to buy that one for import the excel?

Moonsoft support 2016-01-05 17:26:00

I have upgrade to CB 3.1.0, but this problem has existed in previous versions also.

When generating a PDF, images in the "HTML before calc results on PDF, excel, mail" section on the Print Preferences page are not visible in the PDF, but are visible in emails. In the PDF, they are replaced by a small box containing a red X. The HTML is

Am I doing something wrong?

Thank you,


Moonsoft support 2016-01-10 21:03:04

Hi Guys

Just added this calculator, maths is not my strong point but this calculator looks perfect for this calculation and intergrates lovely into this site i am developing.

I need the code for this and in a 2 step process

1.Enters Postcode
2.User enters rateable value £

Result would be rateable value Multiplied by 15%

Calulation is the saving =(postcode is purely for the email so we know where they are from)

Cheers Pete

Edited by CotswoldD - 10.01.2016 21:08

Moonsoft support 2016-01-11 04:07:39

I was experiencing a problem where some of the email headers values from email generated from Calc Builder were missing, and thus defaulted to my server's default settings. This was causing emails to go into the spam folder in Gmail.

In reviewing the code, I believe lines 740 and 741 of /components/com_calcbuilder/models/calcbuilder.php are wrong:

$config->get( 'config.mailfrom' ),
$config->get( 'config.fromname' ) );

changing them to

$config->get( 'mailfrom' ),
$config->get( 'fromname' ) );

solved my problem. I am a php/Joomla API novice, so don't take my word for it.

Moonsoft support 2016-01-11 12:56:11


is it possible to add a column with the checkboxes into the table which will allow user to select few rows and email/download only those selected?

Best regards

Moonsoft support 2016-01-11 13:04:59

Hi again,

I don't see any error message showing up while user would like to add a record with the value already exisiting in key fields. Is it possible to add it in some simple way?


Moonsoft support 2016-01-11 22:30:05


I want my users to be allowed to put into the form only 2 fields (some external order number and choose one option field). On the basis on this input I need to update the list. If I download xls/csv file there is a User name, and name of the value of the option field. But to import data correctly I need the user id and the value of the option field.
So, as it looks for me...List Manager exports the csv/xls files with the name of the values but to import data from the backends it needs the file with the values. I don't see any sense or I missed something.

And one more thing....Is it also possible to update/overwrite data while importing? As I see there is totally new entry being created so I need to delete all the entries and import updated again? I see there was a suggestion in APR'14 ( of such feature but I cannot find if it's implemented already.


Moonsoft support 2016-01-13 16:43:37

Hi, I wanted to ask if it would be possible , which could create someone a spreadsheet ? I still do not understand this component .

My client should first select a basic package , anschliesend additional options , and finally even the maintenance . All this should give a statement .

Just like here

Edited by Xanthios - 13.01.2016 16:44

Moonsoft support 2016-01-14 17:26:32

Hi Why are you using stuff like this???

eval($_code); = hackers use this all the time, really us no reason

Have had a lengthy conversation with MyJoomla on this matter.

Rather dispointed that i have purchased your product, and now showing potential hacks or code that really should not be being used in Joomla.

regards pete

Moonsoft support 2016-01-21 11:18:13

The calculator does not show anything, when the page is loaded. I have to change some value to make it calculate.

Furthermore, the calculator button does not work (even though I set the automatic calc off).

Finally, the export PDF file shows ##IPSSR## instead for the IPSSR value.

Can you help?

Moonsoft support 2016-01-24 19:12:45

I state not to be expert in list management, but Joomla yes and also enough to XML, csv, etc.
I purchased, installed your great component List Manager. I understand how to create a new list, its formatting, publication, etc. But if I try to create a list from an external XML file component me error.
Error while saving list. The list is created, but is empty. I tried both with XML standards, either with XML for Excel, but the result is the same. If I try to import it in csv me an error 500 server. Below I put a piece of the two XML files, but it does not seem that there are no syntax errors. For me it would be very important to avoid having to redo all the lists for this problem. Help! Thank you.

Here are the file:


Sorry, but I can not enter the code. It does not work it

and code

Edited by TRIBU - 24.01.2016 19:30

Edited by TRIBU - 24.01.2016 19:30

Edited by TRIBU - 24.01.2016 19:30

Moonsoft support 2016-01-25 16:16:14


I want to know if there is a French translation list manager.
If not, what files need to be modified for this operation.

Sorry for my english, but google reflecting :-)

Thank you, regards

Moonsoft support 2016-02-02 17:33:42

I need some help in figuring out the formula for counting the number of days between 2 dates

Moonsoft support 2016-02-03 15:12:17

Sorting does not work in version 2.2.11. The first column of an address list I want to sort them alphabetically. In version 2.2.7 it worked.

Moonsoft support 2016-02-05 17:27:59

I am trying to make a calculator that takes the date format adds 90 days to it and outputs the result in mm/dd/yy format. This is the code I have so far but I just cant get it to work:

$aDate = new DateTime($arrestDate);
$mDate = new DateInterval('P90D');
$fDate = new DateInterval('P175D');

$speedydate = date_add($adate,$mdate);
It doesnt seem to like the date_add

Please help



Moonsoft support 2016-02-05 21:17:52

I have 2 calculators within one set of code. Both use date pickers

here is the code:

/* Start Jail Calculator */
$date1 = new DateTime($sdate);
$date2 = new DateTime($edate);
$count = date_diff($date1,$date2);
$total = $count->days;
$inlinedate1 = $total;
$date1 = new DateTime($sdate2);
$date2 = new DateTime($edate2);
$count2 = date_diff($date1,$date2);
$total = $count2->days;
$inlinedate2 = $total;
$date1 = new DateTime($sdate3);
$date2 = new DateTime($edate3);
$count3 = date_diff($date1,$date2);
$total = $count3->days;
$inlinedate3 = $total;
$date1 = new DateTime($sdate4);
$date2 = new DateTime($edate4);
$count4 = date_diff($date1,$date2);
$total = $count4->days;
$inlinedate4 = $total;
$date1 = new DateTime($sdate5);
$date2 = new DateTime($edate5);
$count5 = date_diff($date1,$date2);
$total = $count5->days;
$inlinedate5 = $total;
$grandtotalinline = $inlinedate1 + $inlinedate2 + $inlinedate3 + $inlinedate4 + $inlinedate5;
/* End Jail Calculator */

/* Start Speedy Calculator */
$ctype = "$caseType";
switch ($ctype) {
case "Misdemeanor":
$mdate = New DateTime($arrestDate);
$mdate->add(new DateInterval('P90D'));
$speedyDate= $mdate->format('m-d-Y');
case "Felony":
$fdate = New DateTime($arrestDate);
$fdate->add(new DateInterval('P175D'));
$speedyDate= $fdate->format('m-d-Y');
/* End Speedy Calculator */

Now when I choose a date in one calculator the formulas work on both either giving me zeros or just a certain # of days. How can i stop this behavior. for an example please see

Edited by phil_adler - 05.02.2016 21:18

Moonsoft support 2016-02-07 01:12:50

Is there any possibilities to restrict editing some fields when a user add a new record to a list?

Moonsoft support 2016-02-08 16:54:38

I have made with your help a custom count # of days calendar. The results show up inline.

However whenever I choose the startdate the enddate is automatically choosing todays date even though it does not show up in the end date date picker. How can I prevent the end date from automatically assigning the todays date value before a end date is chosen. I have set the default to 0

Moonsoft support 2016-02-10 19:36:20

My calculator will output the total number of days between to dates. How can I take that number and convert it to years months days for example 366 days would out put 1 year 0 months 1 day

Edited by phil_adler - 10.02.2016 19:36

Moonsoft support 2016-02-24 08:53:34

Buenos días.
He creado una lista con cuatro campos de información. Ahora he de añadir información a esos campos, pero ¿puedo hacerlo manualmente uno a uno o sólo se puede añadir información importando un archivo csv o sql? Entiendo que esto se hace desde la pantalla List Data, a través del botón Nuevo, pero una vez accedo no me deja añadir información alguna.

Un saludo

Moonsoft support 2016-02-27 21:08:43

I need to calculate the total volume and weight of boxes. So a site visiter needs to imput the length, width, height and weight of a number of boxes.

For this I want to create four fields in a repeating section.

How do I code that for each box I get a volume, a total volume for all boxes and a total weight.

I also want to count how many lengths are >120cm
and how many boxes weigh more than 30kg

Moonsoft support 2016-03-07 19:04:11

Dear Sirs,
I'm using ListManager module with the cards view, its a great component but I'm facing two problems:

1. One of the fields in my list is a download link, which I would like to manage with phocaDownload Plugin, since I used it in other areas of the website.
The problem is that if I insert the code in the field using the plugin sintax it doesn't get interpretated when the page is displayed.
Usually modules have an apposite option to enable the interpretation of plugins code, but cannot find it for ListManager. Is it possible to enable it? Is there another way that allows me to use plugins within ListManager cards?

2. I have a problem also with the CSV import procedure. One of the fields of my list contains a video. Since plugins are not working I'm using standard code from youtube that includes the use of iframes.
I can put it without problems when doing it from the backend, in the editor, since enabled the option to not filter and remove iframes. But when I do the import using the CSV import function of ListManager the code to include the video gets removed. The field when I paste the csv code is a normal textbox without editor and there is not possibility to disable code to get cleaned once imported. How can I avoid the iframe code to get cleaned?

Best regards,

Moonsoft support 2016-03-09 20:45:01


I’ve tested the calculators and have a few notes:

1) The volume formula returns incorrect calculations. in the example 120 * 12* 12 the volume should be 10 ft3 and not 17 ft3. This will result in an incorrect freight amount when volume is used
2) The insurance amount is not being calculated when "Add Insurance" is selected
3) US calculator results page
a. Change ft3 to cubic feet
b. Change Lbs to pounds
4) UK Calculator – How do I change rate from $15 dollar per additional 1 CUM to $15 per additional 0.1 CUM?

Thank you.

Moonsoft support 2016-03-17 23:43:33

"Set its default width using the 'size' parameter at field administration."

Where is "field administration" found?

Moonsoft support 2016-03-18 06:00:04

Date field using the "today" type, no date values appear when the form loads, just the international banned symbol when I mouse over the field. If I save a record then look at it in the admin manage data the field is empty. Are their other attributes I need to set to have the date appear when the form loads?

Moonsoft support 2016-03-18 06:04:27

Have a radio button field with tow choices, yes and no. In actions Name is Yes, with Value 01, then Mane is No with Value 02. The buttons display in the form correctly, I can select one of them and save the record. However in the Manage Data tool no values are saved. What piece am I missing?

Moonsoft support 2016-03-18 06:06:20

Click cancel in the form has no action. I would expect it to either clear the form or reload the page with a blank form. What is it's intended function?

Moonsoft support 2016-03-18 17:14:23

Any way to capture the ip address of a guest (not logged in) user who posts a record?
I'm thinking of spammers so I can ban them htaccess.

Moonsoft support 2016-03-23 20:36:14

Went to install on my production site and got a fresh download. On OS X using OS X Archive Utility the file doesn't unzip. I also tried Keka, another zip utility I have used for years and it reports a fatal error on the archive. Lastly I tried unzip in Terminal (CLI) and it reports it is not a zip file. Something change after the website upgrade?

Moonsoft support 2016-03-29 18:32:54

I have a option filed with two choices, "I want to crew" and "I need crew". In list view how do I set a sort order so all the "I want to crew" records are grouped and display first? Is is possible to added a second order by for example "I want to crew" and "Date Entered"?

Moonsoft support 2016-03-29 20:49:11

I am attempting to install the listmanager_2.2.15_25_30 package into a Joomla version 3.5.0 Website. This will replace the old version 1.2.14 List Manager extension.

Because of the size of the file, I have copied the entire package to the /tmp/ directory of the Website. I am able to install the component and modules individually as mentioned in the Quick Guide using the Install from Folder option.

When I install the plugin, the message is: "Installation of the plugin was successful" but only the old Search - List Manager version 1.2.9 plugin is shown. There is no other List Manager plugin in the Administrator > Extensions > Manage > Manage listing.

Also, I have not been able to install the package. Here's the warning message that I receive:

"JFolder::create: Could not create folder.Path: /var/www/html/esl/tmp/listmanager_2.2.15_25_30/install_56faca437a425
Update path does not exist."

I have also extracted the contents of the file in the /tmp/ directory. If I try to install that from the folder, I receive the same Warning message.

Is it possible to install the List Manager package and the plugin?

Moonsoft support 2016-03-31 19:02:23

In the past there was some discussion here in the forum about removing the call to JTooltip. ( Unfortunately the links provided in that thread and elsewhere on the Website are dead. See and

I am using List Manager version 2.2.15 on a Joomla version 3.5.0 Website. The call to JTooltip is causing a JavaScript conflict so I would like to remove it. What is the best way to do that and preserve the upgrade feature of the extension, that is, not edit the files that might be overwritten later?

Moonsoft support 2016-04-01 14:59:12

i try to download the newest version of listmanager, but after klick on Download-Button only one file named index.php will downloaded.

Same problem exist's by download older version's


Moonsoft support 2016-04-03 00:07:21


Thanks for your joomla extension, calc builder, it is awesome! I use joomla 3.5 on php 7 and all is working smoothly

I made a price calculator with fields that are option list. So for an option list there is a Name and a Value.
I would like to show in my report (email, pdf) the Name and the value of the fields to make a description of the price they pay and what for. Is it possible? natively.

For example, I have an option list with Name 'Once a week' with the value '15' € and another 'Once a Month' with the value '5' €
I would like to describe the price as follow:

"You have subscribed to our service at the price of 15 € per month. The task will be done Once a week."

So if the field is $price, I can easily display the value in the report using ##price## but how can I display the name of the option list field ?

Thanks in advance,
Best regards,


Edited by pouce - 03.04.2016 00:09

Edited by pouce - 03.04.2016 00:10

Moonsoft support 2016-04-11 20:43:55

Hello, I try to import a Exel file (CSV), but when I try to upload the file nothing is happen.
I 'am new so I don't have any idea how it works, also the manuel isn't clear for me how to do this

Moonsoft support 2016-04-13 19:12:09


Just bought, installed and tried to import a test calc but got

Fatal error: Call to a member function children() on null in /var/www/html/administrator/components/com_calcbuilder/models/utility.php on line 431

Can you advise ?
Best regards

Moonsoft support 2016-04-15 23:06:32

I have the latest version of ListManager and it's great (just renewed my subscription), but for some reason my lists do not show the pagination lines at the top of bottom of lists unless I enable the "Add" button for that user group. I want Guests to be able to see the listings (and page through them), but don't want guests to be able to Add entries. And without having "Add" enabled, all that shows at the top and bottom of my lists is a long "Search" bar. The pagination options should ALWAYS be visible, since you can't page up or down the listing without them.

Moonsoft support 2016-04-25 21:46:57

After updating to the last version, I have now the Add button on the frontpage.
Because I don't uses this option, I want remove this button from the front, but thet isn't possible with this new version.
Any idea how I can remove this button from the front?

Moonsoft support 2016-04-29 22:07:36

I have two issue about sending email from my list.
The first one is that the field for put in the email adress is very short, I can only see tree punctuations
The second is that every email I used I get the messages: Invalid address.
I don't see where i can change settings for email or more space for the input field.
Any idea?

Moonsoft support 2016-05-09 10:19:57

1. I repeatedly tried and failed to upload a CSV spreadsheet and could only find a way to cut and paste from the spreadsheet but had to add a ; after each bit of data in every row of two of the three columns to populate the table

2. Is it possible to have a “clear search results” button in the Search Module

Moonsoft support 2016-05-12 20:12:23

Hi , i'm very new of this product ,
i bought both module calc builder and list manager for do a web app for a custumer ,
i would know if is possible save in a database table all the field and te results of a calculation and then manage them with list manager ,

Moonsoft support 2016-05-21 16:11:29

This is my first experience with this component and the only coding experience i have was in Visual Basic I am building a Fair Price calculator for a contracting company website

So we have 4 inputs
Material cost (Var1)
Labor Cost (Var2)
Debris Removal (Var3)
Permits and Fees (Var4)

I need to add the 4 variables

then multiply the sum by .5

Then add the 2 to get the Fair Price
$fairprice =$sum+$result;

so is this correct?
$sum=$Var1+$Var2+$Var3+$var4$result=$sum*.5; $fair price =$sum+$result;

Thank you for any help.

Edited by chadely - 21.05.2016 16:21

Moonsoft support 2016-06-01 04:07:20

Is there some way to edit multiple entries in the listmanager backend. I know you can select a group and delete them but I would like to select them and change one of the fields to be changed to another value.

Moonsoft support 2016-06-04 01:02:04

In the demo there is a way to click on the header and it will sort the column but I cannot seem to find the option to turn this on?

Moonsoft support 2016-06-05 00:01:13

I have managed to get the tables added correctly now. But I have formatted by default template to 1300px across. However, when my table is added it doesn't seem to stretch the length of the page.

Moonsoft support 2016-06-11 21:19:32


I have just bought calc builder and tried to install in on my joomla website. However page looks like its uploading but when its done there is no message which says installation was successful. Page refreshes it self after upload is done and thats it. When I check components I see that it has not been installed.

Can you let me know asap what could be the reason for this?

Thank you.

Moonsoft support 2016-06-15 02:57:48


Inline results are not showing actual results when I activate sections. Normally it shows however my customers might want to add more rows of my fields and I need section for that. When I activate sections inline results are just keep refreshing and when I enter values in the fields nothing happens.

What could be the reason for this?

Moonsoft support 2016-06-27 16:12:25

Is there a way to allow the user to save a set of entries in the calculator and reload them in another session?


Moonsoft support 2016-07-13 02:05:04

I would like to use a field as the list item details title. It is the same title as the list title.

Moonsoft support 2016-07-13 22:03:47

I saw in video you can preview form after adding fields. But i do not have such option. Could i miss sometihing!?

i see Main Frontend but button is inactive.

Moonsoft support 2016-07-16 12:03:36


I'm testing calcbuilder but in backend the pagination is not working, do you have any idea?

Thanks a lot,

Moonsoft support 2016-07-18 06:10:04

Never mind. I figured it out.

Is there a way to insert the calculator into a bootstrap tab in an article? Like this? I know other developers allow the insertion of shortcode into an article to display a module within an article, is there a shortcake facility with Calc Builder?

|¯¯PRICE¯¯¯¯¯\___|¯¯¯¯Another TAB¯¯¯¯\_

Description MSRP *

Falcon F5 System includes: Falcon F5 Receiver, Aurora 8.4” Touchscreen Display (Changes when different option is selected)
and 15 in. Falcon F5 Transmitter (Changes when different option is selected) Calculated VALUE (MSRP)

F Series Li-ion/NiMH charger with two Li-ion battery packs
Aurora 1.5” RAM mount on magnetic base and DC power cord
13” 90-degree TNC antenna
Carry cases – receiver and Aurora display
Operator's manuals on USB flash drive

(o) Aurora 8.4” Touchscreen Display (o) Aurora 10.4” Touchscreen Display (o) FCD
(o) 15 in. Falcon F5 Transmitter (o) 19 in. EXT Falcon F5 Transmitter

☐Trade In (If this option is selected, the calculated value is decreased by fixed value)

*Price may vary based on regional equipment requirements.

Using it in a module would not work very well in my layout.


Edited by andreww - 18.07.2016 06:11

Edited by andreww - 18.07.2016 06:14

Edited by andreww - 18.07.2016 06:56

Moonsoft support 2016-07-18 14:45:31


I'm just playing around with the LM component and I faced 3 problems. Great component, but i do need a little bit of help with the fine-tuning.

Date issue
One of my entry fields is the date (list field settings type: date). The date is saved in the right format (dd-mm-yy); however, in the front-end view the date field is always displayed as the current date instead of the date I entered.

filter options
The country example on the demo page shows above the table a filter field with the following options: show filters, apply filters and disable filters. I do get the filter field above my table, however; the only option I see is "disable filter". I want the same filter field as in the country example but I'm kinda stuck.

Bulk update
I enabeld the bulk update function in the ACL and I do get a bulk update button; however, I don't have the option to select specific rows.

I hope somebody can help with the above issues.

Edited by vlistomatic - 18.07.2016 14:45

Moonsoft support 2016-07-19 17:23:18

Hello, I had created a ticket, please take a look. My user is lineaweb. Thanks

Moonsoft support 2016-07-22 18:08:48

Good morning

I wonder how to get the value from a custom field as plugin (Text Input) in the calculator. I already know as String dropdown list is $_arrData. But I cant get the value in the same way for text input.

Thanks in advance

Moonsoft support 2016-08-03 14:01:27

Hi Guys,
I am new here and my first list is here:

1. I dont understand how to create a filter
2. "show all" is not on same height like the search function. it does not look nice.
3. how can I create list with all my products and have categories? Example: I have 200 kitchen products altogether. On subpage A I want only to display knives and on subpage B i only want to display spoons. (but i want to create only one list altogether and put all 200 products inside so that i can have a central search for all products on the indexpage/hompage. So if one uses the search field on homepage and searches for "knives" all the knives should be shown. is it possible?

cheers and thnx!!!!


Moonsoft support 2016-08-03 14:05:39

Hi Guys,
how can I make the font smaller of all field names and all informations in the tables and avoid horizontal bar?

thnx and cheers

Moonsoft support 2016-08-03 14:11:42

Hi Guys,


I want to insert in one table column an icon for pdf which should be linkable to further informations.
like it is on demo (Product list)


Moonsoft support 2016-08-03 14:18:36

Hi Guys,

I tried to import datas via "import" function. I used an excell file but i got error message.

Warning: simplexml_load_file(): /var/www/web27642842/html/ parser error : Start tag expected, 'dels/listing.php on line 1367

Warning: simplexml_load_file(): ^ in /var/www/web27642842/html/ on line 1367

Fatal error: Call to a member function children() on null in /var/www/web27642842/html/ on line 1370

thnx, martin

Moonsoft support 2016-08-04 10:39:38

H iGuys,
I activated the search module but the search does not work at all.

cheers martin

Moonsoft support 2016-08-06 09:50:53


When I go to the manage data section of a list, add a new record and "save & close" I get a 404 error.

I am also seeing an error in my logs not finding this file "administrator/components/com_listmanager/assets/js/jquery-1.8.0.min.js"

Joomla 3.6.2
List Manager 2.3.7

Moonsoft support 2016-09-01 11:29:41


Near each field it's possible to add more informations with a icon?

You can find something in this website, each field:

Thanks a lot in advance,

Moonsoft support 2016-09-02 11:00:43


There is a problem when i try to move (reorder) multvalues in Multiple Option List. I can delete a Value/Option but i can't move it to reorder the list.
I tried this with the newest Chrome and Firefox Versions.

Can you Help me?

Moonsoft support 2016-09-02 11:30:08


When i use the csv export-function i don't have the fieldnames in the csv-list.
Another Point: How to export and open a list with an Notes field with HTML?

Thank you

Edited by galbur - 02.09.2016 11:30

Moonsoft support 2016-09-27 00:01:39

I installed Calc Builder and it seems to have gone fine, but when I access the component to start a new calculator, the "New" button does not work.

Moonsoft support 2016-10-24 20:51:05

We are using List Manager 2.3.10, the latest version. I would like to make one of our lists, generated in List Manager, exportable to PDF. I see how to accomplish that along with the ability to define content to include BEFORE as well as AFTER the list in the list's configuration "PDF/CSV Config" tab. In addition I see a "Detail PDF Layout" area available. However, I do not appear to be able to style the look of the table that is generated for the PDF. I gather, just by the fact that I have this Detail PDF Layout area, that I should be able to control the look of the output, is that true and if so, how does that need to be done if not via html and CSS?

In addition, I have the following questions about the display of lists and/or exporting them in PDF format

1. Disregard this first question!! ... I just found a similar question with your answer in a previous post. Due to the amount of real estate available to display a list in our webpage, I have marked some fields' "Visible" parameter to 'NO' but their "Exportable" parameter to "YES" so that while they aren't shown on the webpage, they will be included in the export. However, the fields that are configured in this matter do NOT export. Is this possible to do or not and if so, how?

2. Is it possible, whether in displaying a list view on a web page or in an export, to use code to display an image depending on the value for an entry's field? Or, for that matter, to define a different value to display based on the field value. I ask not only because an image could define a value with less real estate being used but because I notice that if a field has no value, the "##FIELD_NAME##" displays! If code is possible, can that be put right in the layout html or how is it done and I would need a sample for testing a field's value etc.

3. Depending on your responses regarding formatting a PDF, I thought perhaps using a RTF export might be simpler, but I see that it requires an .rtf file to reference. What would this .rtf file contain that would define the export's content and look and feel?

I am sorry to put so many questions in one posting, but since they are basically related, I thought it was better than posting them separately. Anything you can provide will be greatly appreciated.


Edited by jsjm - 25.10.2016 01:26

Moonsoft support 2016-10-27 13:08:57

after update to Joomla 3.6.4, listmanager data in the frontend are no longer displayed. And the buttons in the frontend will no longer work.

index.php:939 Uncaught SyntaxError: Unexpected token

Edited by moon_1173 - 27.10.2016 13:25

Moonsoft support 2016-10-30 19:10:20

on my site there listmanager uses a color (here the same dark-green as in the header of the whole page) for the background of the filter-field and in the export-area at the bottom ( I can´t find the css entry that defines the color to be e.g. white. Can you help me?

Moonsoft support 2016-11-01 00:05:13

When I want to edit the form-layout for the frontend, in the backend there is an editor, which does not allow to insert not-interpretated html-code. Even when I choose code or code sample in the drop down list "Format", where e.g. normally all "" are translated into "" the editor re-translte it and interpretate it as html.

In my example I want the users to fill in some html code into a field, when they add data to a list. When I create an article with the JCE-Editor I fill in e.g:

After saving it, the wysiwyg-editor shows:

But not the editor in List Manager. It interpretates it, so the linked image is shown.

What can I do?

Moonsoft support 2016-11-03 19:57:37

Dear all,

we installed the Listmanager on our website And after searching and searching to template builder told us Listmanager is somehow conflicting with Unite Revolution Slider. He will not load the images in the slider.

The template builder wrote us:

This is not the template bug. See the screenshot-1. You will get everything is fine.
But there is a component probably named list manager. It is causing some error on console. Which means it is conflicting with the slider revolution. See the screenshot-2.
Try to ask that component creator if they can help you.

I send you the screenshots in a seperate mail.


Moonsoft support 2016-11-17 18:38:05


I have install list manager and made fields but it is not showing on front end can you tell me please or can i install demo data with this component.
Please let me know.


Moonsoft support 2016-12-09 17:04:17

Dear Moonsoft-Supporters!

I have a question regarding the variables at the input mask.

How can I show variables in the shopping cart of virtuemart?


a + b = c (Result will show in the shopping cart)

But I would like to show the input a + b also in the basket!

How can I do this?

Thanks in advance for the reply

Best regards

Moonsoft support 2016-12-15 16:56:54

Hello Moonsoft-Support,

in which css-file I can change the color of the "calculate"-button?

Best regards

Moonsoft support 2016-12-20 17:03:38

Not sure what happened but after attempting to put in an options list for a form field I am no longer able to use the Manage Data option. Each time I click the button I receive the following message: 1054 Unknown column 'Antiques' in 'where clause' SQL=select value from #__listmanager_field_multivalue where idobj=1 and id=Antiques

There is not a column for Antiques and and there should not be a column. Antiques should be an option in the options list drop down field. I have updated the version of List Manager but I as still receiving the error.
Thanks For Your Help

Moonsoft support 2017-01-08 21:07:48

New user to List Manager!

I have a need to produce a page listing our organization's Board of Directors.

Our current page is here:

This is a highly formatted page, and currently requires knowledge of php and html to edit. I would like to make this as easy as possible to edit for a non-programmer after I have it set up.

I would love to retain this 'Article' written with php and pull in data from a List Manager list.

I have a helper that is good with SQL and can help write the code, but we need to know where the data for our list is kept.

Thanks for the help!

Moonsoft support 2017-01-13 17:10:50


I hope you are able to help with this issue.

Here is one of my lists:

the template is a slightly modified version of the protostar template.

on desktop, the search and sort options all appear, on mobile (responsive design), they do not appear, even when you click on the list manager menu button.

please let me know what i can do to resolve this.

Thank you,


Moonsoft support 2017-01-18 21:40:26

When attempting to edit my list in the backend there are no text boxes on the Manage Data Record page. I can not edit existing and I can not add new records. I have successfully imported my records via CSV and that data appears on the List Data page.
Thank You

Moonsoft support 2017-01-18 23:11:16

How do I create a view that will output my records with a category heading.


Moonsoft support 2017-01-28 15:17:20

The problem occurs with different templates.
The add button overlaps with the search button. How can I solve this ?
You can see it on my test page

Moonsoft support 2017-01-30 14:53:53

Hello Support,

I have a problem. When I try to import data from a CSV file, characters like "ä", "ü" and "ö" become a question mark "?" !
Is there a way to simply correct this problem in a few seconds.

Can you Help me?

Edited by Recruiter - 30.01.2017 14:54

Edited by Recruiter - 30.01.2017 14:56

Moonsoft support 2017-02-01 17:50:48

Hi there,
i just installed Calcbuilder Pro 3.1.20
When i create a new form and I click on the Spreadsheet button i get this error:

1064 You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '' at line 3 SQL=SELECT * FROM #__calcbuilder_excel WHERE idobj=

Any hints?
thank you,

Moonsoft support 2017-02-03 18:42:28

Hi there, I could not find a way to use javascript listen to the onchange event of a SELECT (Option List). Any hints? thank you.

Moonsoft support 2017-02-06 07:29:37

hi there,
I am trying to put results into a table.
I created a table using PHP in the code section. It shows up correctly on scree, but the table and its content are not exported in PDF.
I also tried to use the Print Preferences putting results into a table inside the HTML after calc results section, but again the table does not show up in pdf.
Is there a way to export in PDF a format for input and results that is not plain text?
Thank you,

Moonsoft support 2017-02-06 07:31:22

Hello, I enabled the option Attach PDF to email, but via email I only get input form and results as plain text and no attachments.
Any hints?

Moonsoft support 2017-02-08 16:53:37

I am experiencing a very slow load on the pages where I use LM. Almost 12 seconds for the LM data to appear. Is there anything that I can do to improve that time? Please see link below for an example.

Thanks for your Support

Moonsoft support 2017-02-08 18:26:14

I have several lists I use with List Manager. Is there a way to set a font size for each individual list (screen viewing)?

Some of my lists have 4-5 field, some have 12. I would like to be able to fit them on the screen.



Moonsoft support 2017-02-16 21:22:56

Setting the autofilter at the List Manager Main Options to static haven't any effect.

The filter always is dynamic and shows only the previews selecteted entry in the dropdown after filtering.

I'm using the newest "List Manager" version.

Thanks in advance,

Moonsoft support 2017-03-02 09:52:13


Where exactly (and how) can i change the translation of multivalues?

And: Is there a way to use Name/Value form a seperate table?

thank you

Edited by galbur - 02.03.2017 09:53

Moonsoft support 2017-03-02 22:44:52

I'm trying to export a CSV from a list that has internal links to Joomla menu items which of course contain semicolons. The URL is being split across several cells in the CSV. I can only see a way to set the import separators, not the export file separators. Is there a way around this? Thanks

Moonsoft support 2017-03-14 17:10:01


Is there a way to set a filter with a link?
I have an adresslist, and i have 4 admins (north, west, south, east).
The admins should see the whole list but edit (and add) adresses only to their region (north, west, south, east).

How to do that?
Thank you Chris

Moonsoft support 2017-03-15 09:12:19


Is there a way to have a (autamatic) "created date" when somebody adds a record?

Thank you

Moonsoft support 2017-03-15 14:47:40


We want to link a website in our detail layout. We used the insert Link function but it doesn't link to the website.
We also tryed to set "http://" before the Internal name and it worked but after refreshing the website it will converted into "undefined".

Is there a way to fix this problem or a other possiblity to link the website


Moonsoft support 2017-03-15 22:25:26


Is it possible to add a unique REF#, preferably in the subject of the email, in order to track all the emails for a specific calc quote?

Thank you in advance.

Moonsoft support 2017-03-18 17:58:40


I am trying to create a script to check if all values of certain fields are entered.
I tried to used PHP, but I cannot get it to work:
$fw1 = floatval($w1);
$fh1 = floatval($h1);
$ft1 = floatval($t1);
if (( $fw1 != 0 ) Xor ( $fh1 != 0 )) or (( $fw1 != 0 ) Xor ( $ft1 != 0 )) or (( $fh1 != 0 ) Xor ( $ft1 !=0 )) {
echo 'Please enter all three dimensions';

In essence, what I am trying to do is in case the user has entered values to some of the 3 fields w1:Width, h1:Height, or t1:Thickness, I would like the script to ask them to enter all dimensions, so it should not finish the calc but should wait for the data entry. In case they did not enter any if the values, the script should not ask them anything and the calculation should take place.

Thank you in advance.

Moonsoft support 2017-03-31 12:47:06

Frontend Date format is mm/dd/yy (variable baslangic)
I want to add to 40 day to my variable.
How can I?

// Not correct
$newDate = new JDate($baslangic .' +'.$dayf.' day');
$result= $newDate->format('m/d/Y');


Moonsoft support 2017-04-02 18:24:14

I am trying add to ccs Text area field.
But it is not working.

i want to width: 100%; Height:250px;
my web page:
my costum class : .stilim

How can I add to css text area?


Moonsoft support 2017-04-04 00:30:46

I want to create the fields dynamically when making selections from the Option List.
Is it possible to do this? How can i?

sample site:
sample image:

Sorry, my English:(

Moonsoft support 2017-04-08 03:15:38

Datepicker default language is English(En).
How can set Turkish(Tr)?


Moonsoft support 2017-04-10 10:30:34

The calculator button does not refresh the page. How can we provide the page refresh by clicking the Calculate button?

Is there a way to do this?

Because the google analystic bounce rate is very low. If the page is refreshed, the bounce rate increases. This can be very useful for Google Seo.


Moonsoft support 2017-04-12 13:05:39

How can embed a calculator anathor web site?

Moonsoft support 2017-04-12 15:00:03

I'm using calcbuilder extended and have mapped my fields - i know I can show "inline results" but is there a way I can have fields prepopulated with data that is already in the mapped cell from the spreadsheet that the user can decide whether to change prior to calculation being made?

Moonsoft support 2017-04-24 23:31:17

I add to menu item. I selected Calc builder and setting metadata. But Calc Builder ignores meta description data which is set up for menu item.
How do I fix it without creating a module and adding it as an Article.
Is there a way to add the calculator builder as a menu item with the metadata?

Moonsoft support 2017-05-11 17:41:07

I have a list with Multivaluefields.
It was a hard work to bring all the data form a live-site with some strange order in the multivaluefield to a new and cleaned list on local server.
Ok finally i had it. But then i wanted to do a Backup of the list to import it to the live site. After the Import i missed all the entries in the Multivaluefields!
The same when i try to copy the List within the Local installation. There is a copy, but with empty Multivaluefields.

Thank you for helping

Moonsoft support 2017-05-11 17:49:46

I have some Problems when i try to copy a bigger list (about 2000 Adresses).
It stops with a server timeout. I made some changes in the php.ini with the Execution-Time (from 30 to 300 Sec.) but without success.
Somtimes i have blank page. When i refresh i can see the Copy of the List. But with a lot of missing data.

Thank you

Moonsoft support 2017-05-11 17:58:12


Because i can't upolad an image i have to try to explain wath i mean.
I an earlier version on teh frontsite view the the filters were arranged one below the other.
Now i have some smaller and moving (bootstrap? ajax?) filters.
Where can i style the filters to make them "fix" again?

Thank you

Edited by galbur - 11.05.2017 17:58

Moonsoft support 2017-05-17 15:19:43


I got still Problems when i try to save a Formlayout.
I got an Access denied (403) Error.

Thank you

Edited by galbur - 17.05.2017 15:20

Moonsoft support 2017-05-19 14:47:14

After updating to joomla 3.7.1. When I see Listmanager in the Frontpage calls Error 500 internal server error.

Edited by moon_1173 - 19.05.2017 14:47

Moonsoft support 2017-05-28 16:28:03

I created first matrix and everything works fine. Nevertheless, the second matrix does not show any results. I checked everything - code, variables, exit layout, but the result of second matrix never shows up. Need help.

Best regards,

Moonsoft support 2017-05-31 16:06:19


I have the following issue.

I have two fields which gave a result = $result. This result is a number (example 1000)

I have a table with different prices and based on the value from $result I want to show the right price.

Example $table

$result = till 100 price = 50
$result = between 100 en 300 price = 150
$result = between 300 and 500 price = 250

I have tested with a matrix but can't show the right price. It shows nothing when i place this in the code: $pricetoshow= $table

Of course I set $pricetoshow in the exit layout.

How can I do this?

Edited by moon_1108 - 31.05.2017 16:10

Moonsoft support 2017-06-01 23:29:01

Could excel input fields be configured as pre-calculated variables (inline results configured in code section) that don't even appear on the input form?

Moonsoft support 2017-06-03 23:55:10

This is a cosmetic question, hope you will give ma a hint how to do it. I have configured "side by side" input and output, so output shows on the right side of input. I have, though, a large empty gap between two. How can I reduce this gap so they (input column and output column) get closer to each other?

Moonsoft support 2017-06-04 11:01:09

Nevertheless, I do have another question.
In my Exit Layout, I have various results that are based upon user's input. In the code section, I have "if / else if / else" function that controls conditional output results. Everything works fine, I get exact results that I want. The problem is - if I export to excel, all result options get exported, not just a correct result from calculation. Could you please help me solve this issue?

Best regards!

Moonsoft support 2017-06-04 17:31:11

In the calculation I want to do using section, Required does not work correctly.
what should I do?

Moonsoft support 2017-06-10 05:00:10

How should I validate datapicker for the two dates?
My code is working wrong.

CB.validator.addMethod("cb_greaterthan", function(element) {
var startDate = CB("input").val();
var enddate = CB("input").val();
return Date.parse(startDate) >= Date.parse(enddate) || enddate== "";
},CB.validator.format("İşten çıkış tarihiniz, işe giriş tarihinizden büyük olmalı. Lütfen düzeltiniz.")
cb_greaterthan : { cb_greaterthan : true }

Moonsoft support 2017-06-12 13:04:16

I am trying to format my PDF on a single page where input is on the left side and the output is on the right side of the page (two columns). My output is table and, no matter what i try, it is always aligned on the left side of the page. I tried with divs and all sorts of HTML alignment, but no success. Also, I would like to change fonts on PDF. How can I do this?

Moonsoft support 2017-06-23 21:45:20

Hi all,

I've just bought Calcbuilder Extended for use with Hikashop with the CBPlugin and I'm having problems.

I really can't get any calculations happening at all, despite going through the tutorial.

We print labels by the sheet, and we need an easier way for customers to figure out how many sheets they have to order.

For example, one product sheet has 32 labels on it, so to order 200 of those labels would mean they would need 7 sheets.

So I set my code up like so:

//Tag count per sheet field is in the product table, and is input by us in the backend (32 in this case). It should not be visible to the customer

//Total Number of Tags is entered on the front end by the customer, and this number divided by the Tag count per sheet (and rounded up to next integer) would give us the total quantity

//Here I try to calculate the price based on the above input

I also have this code afterwards:

$hk_product_name='32 3 x 1.5 Tags';
$hk_product_description='32 Tags';

Things I'm seeing:

1. I don't see a "Calculate" button at all on my product pages. "Hide Calculate button" is set to NO in the calculator preferences. How do I get the button to show?

2. "Calculated price" and "Calculated price control" show up but do not do anything. I know the tutorial says they should be activated for front-end, but I really don't need "Calculated price control" there anyway. Plus, they are in the wrong part of my add-to-cart column. Can I move these?

Anyway, hopefully someone can tell me what exactly is going wrong here. Thanks.

Moonsoft support 2017-07-01 18:40:54


I'm having an issue with list manager where i can see list data in the back end, but when i try to edit it, it doesn't let me.

Steps to reproduce:
1) Go to lists in list manager
2) click on "manage data" icon next to a list
3) check the box next to one of the rows to select it
4) click the "edit" button in the toolbar

Expected results:
I would see labels with text fields that have the data from the row in them that I can edit and save.

Actual results:
I see the labels, but there are no text fields or data. only the labels.

Please let me know if you need more details.

System info:
Joomla 3.7.2
List Manager 2.4.5
PHP 7.1

Moonsoft support 2017-07-03 16:12:07

I have adding a google address field,


I have google address: Duomo, Milano , MI Italia ( address, city , district , country ) add region it's possible ?

I have table matrix with rates for ( region or district ).

I can get information from address ( for example: region, country, district) for calculation with table matrix ?

Thank You

Moonsoft support 2017-07-05 12:58:58

Hi, have been using your component several times, really great!

I do have a question, I have an excel sheet, and based upon the result of a calculation, the output is in red color or green color. How do I translate this to the component?

Thanks in advance!

Moonsoft support 2017-07-10 16:19:57

I have a simple product just for testing, with width and height input, using your tutorial.
When I add to cart and then start modifying the width and height for a new product, the cart picks up the changed width and height.
Is there a setting that I missed?

Moonsoft support 2017-07-12 20:04:04

I have imported excel spreadsheet with iterative calculations, so several of my input cells have the same value (example, row cells from F5 to P5 will have the same value). Is there a way that I can, in mu calculator, define cell F5 as an input and somehow populate other cells with the same value of F5 without importing all of them into the calculator?

Moonsoft support 2017-07-13 16:51:11

Hi Moonsoft-Team,

can I disable the date on Saturday and Sunday?

So that it is not clickable?

Thank you

Best regards

Moonsoft support 2017-07-13 17:11:19

Hi Moonsoft-Team,

is it possible to show the last calculator inputs and output in frontend only 3 times?

After this, no input and output should be made...

Thank you

Best regards

Moonsoft support 2017-07-22 12:05:51


i would create a new field with Fieldtyp "Optionlist" and at "Multivalues" i would choose "CSV-Action", but nothing happens. Also by "SQL-Action".
Only "Actions" works


Moonsoft support 2017-07-23 16:06:26

a new problem .....
i have a list with some fields. 2 of them are Fieldtyp "User". The first ist called "creator" and the second is "last editor".
The meaning is that when you create a record the creator is entered. And when another User ist editing a record, the last editor is entered in the second field. Basically, it works. In the backend under "Manage data", "user1" is entered for "Creator" and user2 is "last editor".
But both entries are identical in the front-end list
I hope you understand what I mean

regards Franky

Moonsoft support 2017-07-25 16:50:35

Hi Moonsoft-Team,

I have a questions.

If calc builder gives the price-result (duplicate product) to virtuemart, what would I have to adjust, so that the system displays the VAT in virtuemart?

Any solutions? Thanks

Best regards

Moonsoft support 2017-07-26 15:14:49

Hallo MSTeam,

another issue ....
A list with field > fieldtyp "Date - today".
When i add a new record, the date-field remains empty. .... Even after "save"
The field is updated with "today" only when editing.

should i open a ticket ?

Moonsoft support 2017-07-30 22:52:08

Hi there

I've created an event list with various types of events in the coming few months.

Creating a view of this list per event type was fairly easy but ... I have to find out yet how to display only entries in the future.

I imagined something along the lines of
-> more than -> today()-1 (or even "date (today) -1"
as of is of type "date"

Unfortunately, that didn't work - so: how can I accomplish my task?

Thanks and regards,

Moonsoft support 2017-07-31 17:41:50


Plaese suggestion for script to insert in to tab "code", for allowed only registred user to use calculator.
Thank you

Moonsoft support 2017-08-01 12:29:02

Hi there

It's me again. My lists keep growing and so do the requirements.

Can I add a data filter with more than one value for a specific field like: EQUALS 'LA' OR 'Ju'?


Moonsoft support 2017-08-01 14:20:58

I cannot use any of the buttons/labels (backend) when I want to edit a list- or create a new one!
The problem started after upgrading from Joomla! 3.7.3 to 3.7.4... Please advise rapidly as I use
my lists!

Moonsoft support 2017-08-04 14:39:17

Say I have a list which needs to re-prioritize purchases e.g., is it possible to change the order by drag & drop? OR another simple solution??

Moonsoft support 2017-08-04 16:28:33

I had the older version of Php on 1 site (which work perfectly)
Installed ne the Calcbuilder on my new website and no result is shown event with a single input / output text... could you help me on that `??


I removed all useless plugin on the website...

Working prefectly with my other site:

Moonsoft support 2017-08-06 00:47:06


Just wanted to make sure since the last question I've found was from three years ago:

Is it possible to have a calculated field (like "age" from actual date - date of birth)?

(last time the question was asked it wasn't and I did not find a suitable type but still maybe...)


Moonsoft support 2017-08-06 01:34:01

Not finding how to do this. Can I control a record where only the author of that record can view it or edit it (besides the admins)?

Moonsoft support 2017-08-09 15:21:03

Hi, when I send a mail, the window opened does not write anything. What could be the reason for this?

Edited by mehmethocam1 - 09.08.2017 15:21

Moonsoft support 2017-08-12 01:51:53

Hi - The form I have created as several number fields. None of them are required. In the form I can submit without any entries for these number fields which is expected. However in the list view the user can select to edit their own records. From this pop-up these number fields give the user this error if they are still empty:

Please enter a number with 0 decimal(s)

The user should be able to save any changes and still have these empty. How do I fix this issue?

Thank You

Moonsoft support 2017-08-26 08:19:09

I have results of a calculation showing in a table. What I would like is:
If result is 6 or greater then color is green.
If result is

Edited by dhoeke - 26.08.2017 08:20

Moonsoft support 2017-08-27 03:48:18

Hi - I have a list of countries in one drop-down and want to filter a list of provinces in another drop-down in the form when a country is selected so only the provinces in that country show up. I cannot seem to determine how to do this. Are there instructions that I can use to make this happen?

Moonsoft support 2017-08-27 22:41:58

I can use the Data Manager in the back end and all is fine. But when on the front side all labels and fields are missing.

Any idea why?

Moonsoft support 2017-09-13 13:57:08

It seems that CB dosn't support some math function,such as sin() ,asin(), etc. If I want some scientific calculation use, how to do?

Moonsoft support 2017-09-14 03:47:53

After inserting a calculator in article page in joomla, click the export to pdf or excel button, it will create pdf or xls files ,but I can't open the pdf file, and xls file is blank too.

Moonsoft support 2017-09-14 16:42:31


how can I achieve that similar to the mailchimp integration users are subsribed to predefined lists of Acymailing (popular Joomla newsletter component).

Thanks in advance for your assistance.

Moonsoft support 2017-09-18 10:36:32

Hello Moonsoft Team,
Can we pre-loading gif before each calculation results?

Moonsoft support 2017-09-24 13:28:54

Hi MSTeam

after Update from LM 2.5.1 to 2.5.3 the Fieldtype "date-today" doesn't work.
When adding a new record the date-field is empty.
At previous version it works correctly.
Another issue by editing an record. The date-field "date-today" will not be updated with today's date ( this issue are also present in previous version's )

Moonsoft support 2017-09-27 08:49:34

have been trying to set a delivery date using current hour, because order we receive before 11.00 can be done next day, but after 11.00 I have to add a day extra.

I can not get it to work ... have tried this (and variants)

$date = JFactory::getDate();
$currentTime = new JDate ('now');
if ($currentTime ('H') >=11){
do something ...
} else {do something else}

I do not know how to select the current time from JDate, should be possible I guess?

Hope you can help, have tried searching internet but can't find an answer.


Moonsoft support 2017-09-28 07:03:34

have managed to write values from Javascript into an html form, but can't manage to get them into the fields I had made (php).
I have this code to populate an html form and that is working:
function showCoords(c)

The x1 and y1 are the ID's of the form fields. The form is in the 'form layout'.

How can I get these values into the fields I have made so I can print them and send via email?

Hope you can help!


Moonsoft support 2017-10-03 21:03:29


Sometimes (Not very frequently) I get rates like 450.00 instead of 4.50. I think It may be related to number format in some countries. Can it be the cause? Can you help

Sometimes I also have 0.00 rate. Is it possible to have 0.00 rate?

Edited by clandestino52 - 03.10.2017 23:13

Moonsoft support 2017-10-06 12:38:54

have seen that I can use the session Id or name to keep track of my product, but it would be a lot easier if the product code that I am sending to Hikashop from Calcbuilder ('COD') could be used also in the calcbuilder forms.
Have tried all kinds of things, but can't get this to work. Is this because it is only 'made' the moment the product is added to the cart?
If so, would sessionID/name be a better way to set the product code?
(I am looking for a code that is everywhere the same, after 'calculate' is pressed, so we can always find the customisations of the client very easily).

Moonsoft support 2017-10-20 17:22:58

i am a beginner in Listmanager. My Problem: Can I view a list in frontend with the date from today? In the backend, all entries should be shown.

Good would be a switch in the front end, with which I can turn on the option.

Is tha possible? Can you help me?

Regards, Silvia

Moonsoft support 2017-11-26 03:50:04

I am using the hikashop multi vendor platform and I am using different calculators for different vendors. The code im using for my previous calculators is

$hk_product_name='Custom Print';

However, this creates a custom product each time and I cant seem to work out how to allocate this to a particular vendor. Is there a specific vendor code that I can insert to allocate the product created to the correct vendor

Moonsoft support 2017-12-05 01:26:30

I want to change the Subject line to include the primary recipients email...i.e. the one entered via "Show send by email" mechanism.

For example...I'd like create a variable called SENDTO that has the email address in it so I can then manipulate the subject line like this
$subject=$subject." for ".SENDTO." - ".$dateandtime;

I tried SENDTO = $email.... and it works for the email sent to the recipient BUT for BCC recipients it doesn't and instead inserts the word ARRAY.

And even for the BCC recipients I want the subject to still have the email entered in the "Show send by email" field.


Moonsoft support 2017-12-19 09:56:54


I think on newer versions of Calc Builder, there is no support for TinyMce Editor in Form Layout section. Is there a way to activate this?

I want to use tables for my calculator so it would be great if we can actually select between tinymce default editor or the one you suggest.

I'd appreciate if you can get back to me as soon as possible.

Moonsoft support 2017-12-23 00:16:59

how can I make the font smaller in the table?
Sorry, I searched in many css-sheets, but I could not find the right position to change this.



Edited by MSTeam - 23.12.2017 10:41

Moonsoft support 2018-01-09 18:41:55


How can I make that user choose e.g. a country and run a specific code, but when choose an another then calc use another code?

Thanks for the help,

Edited by zen11t - 09.01.2018 18:42

Moonsoft support 2018-01-15 14:46:42

Client has a large list (3000+ records) and is trying to import into MSAccess to run a report (they publish a bi-annual directory). The exported csv file is not importing into Access. Any thoughts/suggestions appreciated.


Moonsoft support 2018-01-16 19:14:44


How can i set inline result fields max decimals?

Thank you very much,


Moonsoft support 2018-01-17 15:22:02

at first: Thanks for this component!

I would like to add the row ID to the tablerow CSS.

I found: trdato=LMJQ('',{'class':'lm_trwhite'}); in the .js file.

Can you tell me how to add the row ID ?

Moonsoft support 2018-01-29 15:37:55


could anyone give me an idea how to implement custom action (in particular, send notification email) when a record is added to a list? Thank you.

Moonsoft support 2018-02-07 07:15:08

I'm having an issue with images not showing up on my exported PDF. I was using an older version of Calc Builder and it was working then. I only just updated today to 3.3.9 (Before I was using 2.1.7). I've tried a lot of different things and I'm at a loss as to how to fix the problem or even where to look for the problem. The image shows up in emails, just not on the PDF document.

Here is a link to the calculator in questions. xxxxxxxxxxxxxxxxxxxxxxx
Any ideas?

Edited by moon_1053 - 07.02.2018 07:16

Edited by moon_1053 - 09.02.2018 02:10

Moonsoft support 2018-02-14 06:42:48

I think i wrong to setting the calculator. But when I use your Example calculators still not working. The "Calculated" button not dysplay the result.
you can see at

Moonsoft support 2018-02-14 14:19:18

Hi! I'd like to build a list of verified students of a school, so that the school partners will be able to check a student's certificate. I want to list some info like the students' name, surname, id, certificate id, certificate date, passport etc (in a way similar to the Countries list in your demo).

I am trying to create a list where the visitors follow these steps:

1. Enter a page where the list entries are NOT visible and enter their search criteria (name, passport)

2. Apply filters

3. View ONLY the listings that meet their search criteria

I have set "Hide records on first load?" to "Yes" but then the filters don't appear. Am I missing a configuration setting?
I would also like to hide the "Show All" button.

Thank you!

Moonsoft support 2018-02-19 16:33:29

I want to move the buttons in the filter mod to the bottom of the module instead of the top. Do I need to override something?

Moonsoft support 2018-02-22 15:10:41

My list is in Swedish and we have the characters ÅÄÖ. In auto-filter select list the characters are ordered as AAO. How can I make the list order correctly according to Swedish standard?

Moonsoft support 2018-02-26 10:15:15

I'm missing a reset button for the search module. How else to get back to the full list without refreshing the whole page?

Moonsoft support 2018-02-27 16:48:19

Field type Today works in popup add but not in add form when linked to form through menu item. Could it be a javascript issue? And it's visible as a non-editable text field. I wish it was hidden.

Edited by bonnielass - 27.02.2018 16:48

Moonsoft support 2018-02-27 16:57:06

Automatically generated drop down lists in the filter module isn't restored when I click disable filter. Example:


If I choose to flter A only A is visible
I click "Disable filters" and still only A is visible.

PS. I think this List Manager is awesome! I have been looking for this sort of component for years and it really bridges the gap between programming and Joomla.

Moonsoft support 2018-02-28 22:55:51

I have to normalize a string to uppercase.
I tried with Function "strtoupper();" but not work

for example:

suggestion, please.

Moonsoft support 2018-03-01 12:37:28


I am trying to come up with a way of auto populating a field in a list.

I currently have the following setup:

List 1 (Engineers)
List 2 (Customers)
List 3 (Service Log)

When I add to the Service Log list i have setup a dropdown box (option list) so the user can choose for a list of Engineers from the Engineers list.

What I am now trying to achieve is the same thing with Customers but to auto populate the remaining fields. So the user will select a customer from the dropdown list being taken from the Customers list but then certain other fields to be filled in automatically.

So, user selects customer and it automatically fills in, Customer name, Customer contact etc without having to manually fill the fields in again when they are already on the Customers List.

I hope this makes sense?


Moonsoft support 2018-03-01 12:53:41

Can you give me a sample file to upload. to do an export in rtf

I use word and wordpad safe as rtf to make template to upload for the rtf export

the result is a download of template or a 0 byte file

This are some of myfield

please use my email address or post a downloand link to a zip file

Edited by moon_1209 - 01.03.2018 12:53

Edited by moon_1209 - 01.03.2018 12:54

Moonsoft support 2018-03-01 16:36:51

I have a a list with a date field and some tekst fields

how do I get the detail html layout of a record in a module, only the field i select with ##field## , so no filter export, table or other stuff.

Moonsoft support 2018-03-07 17:27:09


How can I give access for an user only calculator statistics in joomla?


Moonsoft support 2018-03-08 13:56:42


First of all, thank you for your support so far.

I have a query regarding the optionlist list. I currently have a field which populates its data from another list using the following SQL code:

select value,value from #__listmanager_values where idfield=1

My problem is, as the original list builds up I have multiple duplicate entries in idfield=1. This is causing the optionlist to auto populate with all of the items (including the duplicate ones). Is there a way to strip out the duplicates so only unique fields are loaded in the optionlist?


Edited by liam.baker - 08.03.2018 13:57

Moonsoft support 2018-03-08 15:36:59


When I click the Detail or PDF Detail button the content inside the HTML box is not displayed. I require my engineers to fill in field which details the work carried out, which could consist of 4 - 5 paragraphs.

The TextArea field doesnt seem to be suitable as it takes away all of the linebreaks.

Could you tell me if I am missing something as I can't see this questions anywhere?


Moonsoft support 2018-03-08 19:02:51

Hello all

the last package purchased today does not install.
After unzip and install the extensions one by one, the component does not install.
I specify that I already have a version of List Manger installed: 2.2.11

Thank you for your help.
Best regards.

Edited by phil64 - 08.03.2018 19:03

I did some extra tests.
I was able to install version 2.3.17. But I can not install the following versions.
I understand that it could the weight of the extension, more than 15Mo from the 2.4, while before it was 8Mo.
But I'm not sure. My PHP.ini is 16MB for file upload.
I tested the installation of other extensions without problem.
I tried to uninstall the current version as well, but it does not change anything.

Best regards

Edited by phil64 - 08.03.2018 23:55

Moonsoft support 2018-03-13 11:17:35


I am not sure if I am missing anything obvious, but do you have a way of adding a signature as a field.

For example, one of my lists outputs a site visit report as a pdf based on what the user has entered, it would great if the user could get the customer to sign a field using a stylus or finger from a tablet, and then to output this on the site visit report.

Many thanks,

Moonsoft support 2018-03-13 20:10:58


I exported my calculator statistics, but when open it with excel and make Text to columns the separator is comma, but my data contains number with comma and dot two.
E.g: number1 = 10,251.01

So excel make column there two.

Can I export my calculator with semicolon separator?


Moonsoft support 2018-03-14 17:31:55


I have 2 string text

for example:

$mconsegna0=ABETONE # (FIELD INPUT)


if ('$mconsegna0'=='$keys0') $disa=10

why the result is 0 and not 10 ?

i want ... if "find the same value" result is = 10
suggestion please.

Moonsoft support 2018-03-29 18:18:54

Hello. I have "successfully" created a calculator that as result tells you how many calories you should eat a day. However, I need to add 2 options on 3 different sections. In HEIGHT I need to have the option Cms or Feet and on WEIGHT I need LBS or Kgs and finally I need to know the goal of each person which will be 3 Options/Variable like GAIN, LOSS and MANTAIN. I am not sure how to do this. This is the link of my CalB

The new 3 options should do as follow if GAIN add 400 if LOSS substract 400 and if MANTAIN just multiply by 1(do nothing to the result)

Any ideas?


Moonsoft support 2018-04-05 08:41:28

Function Static is not working from 2.4.5?
I have tried many difrent versions and in 2.4.2 everything is ok but from 2.4.5 in Autofilter is always Dynamic.
Do you know what is wrong?
Did you have similar problems?

P.S. I use clean joomla 3.8.6

Moonsoft support 2018-04-05 20:39:53

I have to insert a quote date to field "description hihashop"
the code is correct for get date?


thank you

Moonsoft support 2018-05-07 13:42:32


Can you tell me when you will support natively joomla jQuery for Calcbuilder ?
Importing old jQuery libraries breaks a lot of things in joomla


Moonsoft support 2018-05-11 11:23:01


I have a list containing data for current service contracts in place. Is there a way to have an email sent to either myself or the customer letting them know the contract has ran out (date field has passed).


Moonsoft support 2018-05-17 18:55:39

If we have a list with many items, how can we control the paging for the operator?

Moonsoft support 2018-05-24 16:54:47

How can I sort items in select field in filter module? Where is the order determined?

Moonsoft support 2018-05-29 15:06:54


I need a simple calculator but I dont have the time to learn / understand the calc builder. So I would give someone money for doing it for me.

Here you can find exactly the same calculator as I need:
I can give you a good written description of the calculator and your job would be to implement it on my webpage.

Interested? Please send an e-mail to

Thanks and all the best,

Moonsoft support 2018-06-01 19:32:54


I have to small problems with my calculator. You can find him here:

If you open it you cannot see an option in the list automatically. It should be great if there is automatically the smallest option (in my case "3" is choosen).
When I choose manually the option in the list I cannot see my entry, the field is empty. By clicking on "calculate" everything works fine. So it looks like that this is only an error in displaying the options.

Here you can find two screenshot where you can see what I mean:

The second problem is about the round function in php. After calculating it might be that the result is not an integer. It could be that the result is 14,72 or something like this. Actually I get a dot for the decimal, but I need an comma. How can I change this?
(Here is also a screenshot for this case:

Thanks for your help.

All the best,

Moonsoft support 2018-06-07 12:50:05

I have a user field that saves the users id and gets the name. But I realized that if the users account is deleted the name of the person that registered the post will dissapear. I've created a new field where I want the users name to be saved in text but I'm not sure how to accomplish that. Do I make a query field and if so, how?

Moonsoft support 2018-06-07 12:53:21

I want to translate the error messages shown in form validation but I can't find anywhere to do that except in the file assets/js/jquery.validate.min.js?

And where do I translate the button "Print" in the popups?

Moonsoft support 2018-06-15 18:14:01

1. When I try to export to PDF (filtered or normal) the pdf show up, but I cannot download it or save it to disk: save as...). It does work with Excel, but not with PDF
2. When i type in a valid emailaddress end click "Emaillist to", a invalid email address" error pops up. Why?

Sending mail from the "send test mail" in the Joomla configuration document does work.

Any idea's?
BR, Johan

Edited by jdg072 - 15.06.2018 18:14

Moonsoft support 2018-06-25 23:38:34


I have a calculator that consists of several option lists and a linked list (sql). Option lists provide criteria according to which a list of database items are displayed in linked list (sql). Selecting an item gives detailed information about it. Calculator works, but since I can only choose 1 trigger field in options, linked list (sql) is only updated when changing that one specific field. How do I make that changing any of the option lists would trigger linked list (sql) update?

Moonsoft support 2018-07-12 09:51:34

is there a way to work with macros in Calcbuilder?
Can also be made against software programming.
We need macros in Excel which are included in the calculation.

Moonsoft support 2018-07-18 17:42:19


I am experiencing trouble finding the difference between two dates. I have tested the code on other php editors and it has worked fine.
The code I have used is as follows:
$ysp = $tax_2018->diff($DofP);

DofP is a date input field. I am trying to find the number of years between 2018-4-5 and the date entered into DofP.
Any help would be appreciated.

Moonsoft support 2018-07-18 17:46:26


Can you please explain the process to imbed a calculator into an article. I have tried setting the module position to myposition and then entering the following code directly into the article: {loadposition myposition}.
This displays the article but it doesn't seem to transfer its computational ability. When the "calculate" button is pressed nothing happens.
Is there another method I can use?

Moonsoft support 2018-07-22 16:23:15

I just upgraded from 3.1 to 3.3 and I noticed that the form layout editor is no longer my default site editor (JCE) but has been replaced by another less-functional editor. Is there some reason for this? Can force it to use JCE?

Thank you.

Moonsoft support 2018-08-14 08:53:28

None of my calculators are working in Chrome. Suggested work around would be appreciated

Moonsoft support 2018-08-15 10:04:24

Can I link to an entry directly or link to a search result? I can't find any information about this.


I have a list of fruit.


How can I link directly to orange entry or at least link to listmanager already filtered only to show orange?

Moonsoft support 2018-08-21 10:44:58


I would like to send the email with another button than 'calculate'.
Process :
- The person enters values
- The person clicks the calculate button and sees the calculation results on the screen
- The person indicates are his email address and click on a button 'send' (with attached piece the generated PDF).

How could I do that?

Thank you in advance.

Best regards

Moonsoft support 2018-08-27 17:11:25


I would like to know if it is possible to override the part 'send a mail'. (front office, email fields, send button)(Css are not enough)
Because I have to change some small things and add text.

Thank you in advance.

Best regards,


Edited by moon_1763 - 27.08.2018 17:11

Edited by moon_1763 - 27.08.2018 17:12

Moonsoft support 2018-08-29 11:44:32


I manage to generate a pdf (which is displayed well) from the pdf button of the calculation result of the website but when I send an email, no pdf file is associated with my email.

Do I have to do some particular things for it to work? (I checked in the options the association of the pdf file in the mail in the parameters of your component)

Thanks a lot for your help.

Moonsoft support 2018-08-29 14:19:39

Hello! I would like to know have to use If function in Calc builder?
There is my mistake

Edited by mensarius - 29.08.2018 14:34

Moonsoft support 2018-09-13 11:05:19


I would like to send copies of the mail to other email addresses when I click on 'send' on the site (not when I click on calculate), I fill in the fields in 'Email' but it only seems to copy from the mail to be send.

Fields: ('Send email copy (CC) to' and 'Send blind carbon copy (BCC) to')

Do you have an explanation and a solution?

I thank you in advance.

Best regards,

Moonsoft support 2018-10-11 19:17:16

I had got this working in the past, but now I can't get it to work correctly.

My 'Get Quantity' button will not show on my page. My fields all show, but no button.

When 'Show button' is off in the plugin, changing the quantities on the calculator does nothing.

There must be something I'm forgetting to do, but I can't figure it out so far.

Thanks for your help.

Here's my system info if it helps:

PHP Version: 7.1.15
Web Server: Apache
Joomla! Version: Joomla! 3.8.12 Stable
Hikashop: HikaShop Business 3.5.1
Calc Builder: 3.3.22
Hikashop Calcbuilder Plugin: 3.3.22

Moonsoft support 2018-10-26 11:22:54

Pls help me to check, there is no field when click to add or edit record

Moonsoft support 2018-11-03 07:31:16

I have to convert my website to wordpress to enable after pay on my website. Can calc builder be intergrated with wordpress.

Edited by mieprint - 30.01.2021 08:54

Edited by mieprint - 30.01.2021 08:55

Moonsoft support 2018-11-03 10:29:48

I want to make use of matrix values for different calculations.

We have created price calculations for similar products:
Price calculation product 1
Price calculation product 2

These price calculation make use of the same prices per kilogram for different materials. So we want to make a matrix $prices with the data:

Is it possible to use the values of the matrix $prices in both price calculations?

Or with other words : is it possible to create a "central" matrix which values can be recovered in any calculation you want?

Moonsoft support 2018-11-08 10:32:42

We calculate a price for a product with two configurations : config1 and config2 (option list field).

After the choice of the configuration the customer has than to give in a value of the width of the product in millimeters (number field).

For config1 the lower limit of the width is 1000 mm and the upper limit 4000 mm.
For config2 the lower limit of the width is 2000 mm and the upper limit 5000 mm.

Can this be set in the form fields so that the customer gets a warning when he choses a width which is not possible depending on the configuration he has chosen.

So with other words : is it possible to set conditional upper and lower limits of a number field based on a option list?


Moonsoft support 2018-11-11 19:55:11

In your tutorial you mention the next code.

$usergroups= $user->groups; // List of Joomla groups this user belongs to (is an array)

Can you help me with the right code to retrieve or recover the data of this array of the list of groups the user belongs to.

We have assigned our customers who have registered on our site to different groups like customergroup1, customergroup2 .. ectera. Each customergroup has a different discount percentage. I am looking for the right code to find out to which group the logged-in user belongs to after the code $usergroups= $user->groups; and give him/her a certain discountpercentage when he/she uses our calculator.

Which PHP code do I have to use? Do I need column or row names? And if yes how to find these names in the array.

Best regards

Moonsoft support 2018-11-11 20:09:49

Sorry to bother you again and I hope you do not find me too demanding.

I have the next question.

In the calculator of our product the user can choose with a YES/NO field if he wants windows in our product.
When the user chooses YES than some extra input fields should appear:
1. a number field with how may windows
2. a radiobutton field with the options 'opening by hand' or 'opening by electric motor'.
When the user chooses NO the mentioned number and radiobutton fields should not appear in the form layout. Is this possible?

Can this be done by a default method in your Calc Builder or do I have to use special javascript?

Or in other word, is it possible to show only certain input fields when a YES/NO condition is met?

Best regards,


Moonsoft support 2018-11-16 12:08:48

I would like to show the content op my matrix in a nice way in the exit layout.

I have tried with : $output=print_r($mymatrix); in the code section and ##output## in the exit layout section. But all the values of the matrix are printed one after the other and not presented in an orderly way in rows and columns.

Can you give the right PHP codes to achieve an orderly presentation of matrix values in the exit layout.


Moonsoft support 2018-12-18 09:27:26

With reference to my ticket #1726 I have posted on the Hikashop forum the question: Is it there a way to give a picture to the hikashop checkout?.

See also

They answered:
"The image is not stored in a different table. The image path is stored in the same table. It's only the image data which is stored in the upload safe folder. And this requires the data of the image to be passed in $_FILES.
However, I don't know how the data is given by the calculator to HikaShop. It is done with a redirect to the add to cart URL of the product ? In that case, that won't be technically possible. Or is the add to cart done in PHP and then the calculator redirect to the checkout ? In that case, the calculator could store the image data in the correct folder and store the image path in the table like it does with other custom fields and it would work.
I'm afraid you'll have to check with them again with the additional information I gave above :/"

Can you give a reaction to the answer of Hikashop, or would you like to participate in the discussion at the forum of Hikashop in the above mentioned thread.

Best regards,

Moonsoft support 2018-12-28 04:53:39


I am very inexperienced with Web Design so forgive the simple questions.

I am wondering how to connect to a MYSQL database and display/edit/delete the contents of a table on my website via Joomla. Is there some instruction how to do this seemingly simple task?

thank you

Moonsoft support 2018-12-28 19:35:38

List Manager is not responsive. Any way to make it responsive?

Moonsoft support 2019-01-01 02:25:17

Im working on a new site utilizing wampserver. I have tried to install calculators which are currently working well on a live site. I have tested the local host version with your sample inline result calculator and it doesn't work either. I cant get a result on any calculator. The new site is latest joomla/gantry 5 framework. My live site is the same.

Edited by mieprint - 01.01.2019 02:25

Moonsoft support 2019-01-06 02:58:29

This is rather urgent. My calculators work fine in mozilla, however, Im having problems with Iexporer and chrome. Either invalid token or no result

Moonsoft support 2019-01-11 12:14:57


1st thanks for this great component. I needed to build calculator by mimicking simple Excel spreadsheet
and this component was big relief after time spent by fiddling with other form creators for Joomla.

I created one calculator where user needs to fill some numbers and form shows results in inline fields
There are also three text fields and one Checkbox on the bottom where users needs to fill their personal details before sending email.
I've set Name field and Checkbox to be required.
- Throws calculate on init page > Yes
- Hide Calculate button > Yes
- On three text fields on the bottom > Reload Inline events > No


1. Whenever page loads, it shows this prompt: "Some values are incorrect"
That's happens if I set "Your Name" or Checkbox I agree field to be required.
I need to have both them required and Id to keep "Throws calculate on init page" option activated
Is it possible to exclude these from initial page init on load?

Any suggestions how to fix this issue?

2. Where can I edit email and PDF templates?
- I used bootstrap in Form layout but this doesnt work in email. I need to have three columns
Should I use tables instead of bootstrap template?

3. How to prevent sending empty fields in email? (Or to be shown in PDF)
Currently if field is empty, user gets ##variablename## in email.
Maybe to set up some conditional rules? Examples?

4. What would be the best way to replace default "Send by email to" field at bottom with Custom email field
And custom send email button which is shown next to reset button?
I would like to have all user fields in one area, like: Name, Email, Phone, etc.
And all needed buttons on the bottom

5. Is it possible to have Print button at bottom, like PDF and Excel buttons?


Moonsoft support 2019-01-15 18:02:42


I'm doing a calculator for US visitors.
In their accounting instead of writing negative number as caclulated output they are putting it in brackets
so if i have this setup:
$field1 - number field
$field2 - number field
$field3 - inline result
and set this code: $field3 = $field1 - $field2 which results with for example 2 - 4 = -2
how to set up things so that instead of -2 it displays: (2) - number 2 in brackets

So I need a way to display all negative numbers in brackets, without minus in a front.
Positive numbers should be displayed without brackets.

Is this possible?
I tried to put my own if else code but it didn't work.
Maybe I need to use different syntax?

I found similar thread but didn't want to necro it:


Moonsoft support 2019-02-05 22:30:36


I'm making a calculator that filters values from a database to calculate the price of a product based on its components. Basically it consists of:

Option list - that retrieves category names using sql actions;
Linked list (sql) - retrieves component names according to the category selected above.
Component is selected and price is calculated.

So far everything is simple and works fine, but the issue is that to calculate the price of a single product I need to add several components to calculation thus sections have to be used.

I know arrays are in action here, but I just can't figure out the correct syntax how to make it work. Not sure if I'm missing something, or tutorial and examples just doesn't cover this case.

Would appreciate any help or hints on the matter.

Moonsoft support 2019-04-03 09:16:14

Necesitamos crear dos tipos de calculadoras y no sabemos qué tipo de campo usar ni cómo vincular los resultados a Virtuemart:

Calculadora 1: Precio por metro cuadrado (cortinas, estores y persiansas) redondeando de 5 en 5 cm.
Queremos que calcule precio por metro cuadrado entrando las medidas en cm y redondeando de 5 en 5 para el cálculo del precio. Es decir, si entran 94 x 126 el precio es el equivalente a 95 x 130. (Y lo mismo si entran 93x128,,,) El usuario introduce las medidas, no las selecciona de una lista de selección.

Calculadora 2 Matriz- Precio asignado en función de una tabla de ancho x alto (No precio por metro cuadrado sino precio anotado directamente) Entrando las medidas en cm y redondeando de 10 en 10 cm a la medida superior. Es decir, en la tabla o csv las columnas y filas saltarían de 50 a 60, de 60 a 70 etc. De manera que el precio de un producto a medida de 59 x 53 debería llevar a la matriz de 60x60. El usuario introduce las medidas, no las selecciona de una lista de selección.
En el caso de la Matriz he hecho una prueba pero no funciona. ¿Podría subir un archivo de imagen con las configuraciones para que las vean?

¿Qué ejemplo de calculadora usar para cada caso?
¿Qué tipo de campo debemos usar en cada caso?
¿Qué tipo de operación debemos introducir o qué debemos hacer para que redondée el resultado de 5 en 5 (metro cuadrado) o de 10 en 10 (matriz)?
¿Cómo vinculamos las operaciones con Virtuemart?

Pueden ver un ejemplo del viejo plugin que queremos sustituir por el vuestro en estas url:
Para precios por metro cuadrado
Y en esta para precios en función de una tabla:

Moonsoft support 2019-04-09 09:10:41


Is it possible to build a table with Joomla Articles from a specific Category? With linkable titles (leading to the article) and the possiblity to sort the list with joomla Custom fileds?

Thank you
Best regards

Moonsoft support 2019-04-15 22:15:30


I am running Joomla 3.9.1 with PHP 7.2.16 and get the above error message when trying to install LM 2.6.8_25_30.

I have also tried installing older versions of LM and the alternative methods (URL and Folder installations).

How can I get List Manager up and running again?

Moonsoft support 2019-04-23 13:26:39

Hi there,

I've uploaded a spreadsheet as a calculator, created fields, mapped them etc. Now how do I make that work with HikaShop?

I want to be able to get the input from the Hikashop product, and use the output from the spreadhseet.


Moonsoft support 2019-05-09 08:13:28


I have a short list with one date Item. In the Database is the date correctly, but in the main table view is always the current date shown ()today. The funny thing is, I can sort on a table with current data and in the detail view is the right date...

Would be glad for a fast Response or Idea…

Best Regards

Moonsoft support 2019-06-21 09:59:04

hello i need the number of sections to calculate an average, how do i code it?
Thanks for the help

Moonsoft support 2019-10-28 18:03:35

Dear Sirs,

Please provide html layout code (or modifications) for printing in all documents (în footer) real date and time of print!

Thank you.

Moonsoft support 2019-11-30 13:20:29


I have a calculator in MS Excel 2019.
in the Spreadsheet tab I have given the half mapping in the spreadsheet.
I've created the appropriate input fields on the Fields tab. I have generated Form Layout. I described Exit Layout. After clicking the Calculate button will not get the result. Nothing happens. What did I do wrong? The Excel calculator uses two sheets and the if formula.

Regards Wojtek

Moonsoft support 2020-01-06 14:56:15

Hello team

I've been using list manager for quite a long time but I hadn't upgraded since 2.0.8.
I wanted to update to the latest version but it didn't work. I uninstalled version 2.0 and installed the new version, but it doesn't work anymore. Nothing installs in both cases.
I have the latest version of joomla updated and the version of php is 7.3.13. I cleaned the database and all the files of the old version have been removed.

I'm not sure what to do, could you please help me to find a solution?

Thank you in advance.
Best regards,

Moonsoft support 2020-01-12 02:31:52

Hello, I'm having problems running the extension, when I open the extension the following message appears in all fields, making it impossible to use the extension
(I'm using local host)

<br />
<b>Notice</b>: Trying to access array offset on value of type null in <b>C:\xampp\htdocs\Neoped\administrator\components\com_calcbuilder\views\utility\tmpl\edit.php</b> on line <b>164</b><br />

Moonsoft support 2020-01-21 14:43:10

I'm in doubt how to make a calculator.

need to convert a unit of weight (kg) into caloric weight, as follows:

if weight is <10kg = caloric weight is: weight x 1
if the weight is> 10kg and <20kg = (weight - 10) x 0.5 + 10
if weight is> 20 = (weight - 15) x 0.2 + 15


weight: ( form )
caloric weight: ( result )

result example 1:
Weight: 7kg
Caloric Weight : 7kg

result example 2:
Weight: 15kg
Caloric Weight : 12,5kg

result example 3:
Weight: 35kg
Caloric Weight : 18kg

Moonsoft support 2020-01-22 12:25:29

I am using the list manager for a list of reports with a picture link in the URL field and describing and classifying data in some other fields. I would like to use the "box" to display the content of the list, but in an unstable manner some text is displayed outside of the box. I have documented the problem with screenshots in the pdf

Do you have a stable solution for this problem?

Best regards, Helmut

Moonsoft support 2020-02-06 21:28:37

Hi there,
I use auto layout. I get the labels to the left of the fields. I would like to get the labels ABOVE the fields though. Anyone knows how to do this?

Moonsoft support 2020-05-22 22:05:29

I have some doubts with my calculators.

1ª: how do I align the text inside the fields box?
2ª: how to change the size of the fields box within a table?
3ª: how to use the if function with reference to an option list item?
4ª: how to create a condition to disable (disable the selection) an item in the option list?

Edited by thiagobarreto - 22.05.2020 23:36

Moonsoft support 2020-06-17 21:37:18


I have several forms working and a new one that has an issue with the Form Layout. The edit window does not have any editor tools and clicking the column buttons does not populate the edit window. The Form Layout for my other forms is working fine.

Why does it not work for this new form?



Moonsoft support 2020-06-18 00:50:05

I purchased this list manager thinking it would do what I want, but I am struggling and the help is less than intuitive.

I need customers to be able to use a simple drop down list to select a US state.
Once selected, I need to display specific companies that represent the selected state.

So customer for example selects Utah from the list
and 3 reps details display, details are company, multiple tel and email in a nice formatted style.

SO far I have the data inserted into the respective fields, but thats as far as I have managed to get I cannot get the list of states into the system anywhere, seems to be no way to actually create a drop down list.

Anyone know how to do this?

Moonsoft support 2020-06-19 15:15:37

Trying to make things a little simpler for those editing the content of the list, so I dont want to use inline styling if possible.
I cant find or even see any style sheets being loaded, though I can see most styling starts with lm, none are loaded according to Firebug, so the question is where are these loaded.

I have tried inline styling and it is ignored, I also tried setting my own class, also ignored.
It may be related, but when I view the results on the front side, in card format, I have the field title followed by the actual field content, but in all parts of the layout on the back end I have removed the field title from being displayed, but it remains visible on the front end.

Moonsoft support 2021-02-22 13:35:50

I have created a Calculator, but in Modules I can't save the new Calculator.
I can see the default CalcBuilder module, but when I input the data for my calcuator and try to publish it, it just Close and doesn't save my data.
It seems like it can't save the new module data.

Moonsoft support 2021-03-06 18:03:54

I am transferring an old Excel spreadsheet to List Manager. I created the fields and set the CSV up to have the exact same structure. However, the expected CSV structure shows two semi-colons, and I do not know where that extra one is coming from:
SMU;;Name;Email;TelOffice;Mobile;MS License Code;
The import is thus failing.
Any ideas?

Moonsoft support 2021-03-11 16:07:12

Hi, I need to know if the following is possible:

I want to create two lists:
1. Staff Name List
2. IT Asset List

I want to capture (import) all staff members' name to the Staff Name List, and also capture all IT Assets (computers) with their serial numbers to the second list.

Then I need to assign an asset to a staff member with a lookup field. If the staff member resigns, the asset should be reassigned to somebody else.

Is there a way I can create a field in the Staff Name List that links with the IT Asset List's serial number? I used to do this a lot back in the day when I programmed in PAL (DOS version), so I guess it should be possible, but do not know if it is an available feature in the List Manager software.



Edited by sandvelder - 11.03.2021 16:07

Moonsoft support 2021-04-05 17:34:30


Just checked into your extention. Have to say it works well, but it takes a bit to get into. I find it hard finding my way through the documentation, but will learn step by step.

I have a very simple calculation:

This, based on values I provided, works.

The output / result can be between 1 and 100. Maybe in steps of 10, maybe in steps of 1 (still have to decide).

Based on the result I want to display specific information. Do you think this is possible?

So if result = 31 display moduleposition31
If result = 55 displaymoduleposition55

Thanks in advance!

Moonsoft support 2021-05-17 16:18:45

In frontend LM shows in the filter input area always "LMPLACEHOLDER" when I use the standard-layout. I only can use standard-layout, because your intgrated layouts only show dark text that is on the black site-template not visible. How can I change?

Moonsoft support 2021-05-26 13:25:52


Joomla says that List Manager extension update to v2.7.3 is available. When I try to update I get an error "Error Invalid extension update"

Please provide steps on how to update.


Moonsoft support 2021-05-26 14:05:10

Is there a way to hide the ID number column in the results list?


Moonsoft support 2021-05-31 10:35:23

The import spreadsheets program not work, see the error :
i have testing with different version PHP ( 7.0 ->> 8.0)

1064 You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '' at line 3

Thank you


Moonsoft support 2021-10-11 06:48:56

I guess Joomla 3 will be around for a while. And many extensions are not ready yet.

Table Manager is one of those, plus plus it was lacking responsive support and bootstrap.
List Manager now has this support but is unfortunatly not compatible with Joomla 3 anymore.

Please consider a solution to support Joomla 3 with these important features.



Moonsoft support 2021-11-07 05:18:43

Well found this guide and HELPED a lot to understand the List Manager extension. However, when trying the Manage Data from back end I got a fatal error. Please note I was able to add data from frond-end module and item is listed. Link that cause the error:

The error is:
An error has occurred.

0 Call to undefined function Moonsoft\Component\Listmanager\Administrator\View\Data\_()

Setup: Ubuntu 20.04, PHP 7.4.25, MySQL 8, Apache 2.4.51 and Joomla 4.04.

Have to figure this as my main use for the List Manager involves importing data from CSV (next thing to try).

Thanks in advance

Edited by latino07 - 07.11.2021 05:19

Edited by latino07 - 07.11.2021 05:21

Moonsoft support 2021-11-21 18:43:49

Hi Moonsoft-Team
I've been using Listmanager for years with Joomla3 without any problems
I have some problems with the new Listmanager and Joomla 4
Before updating to Joomla 4 and Listmanager 4x, I want to test and learn. For this I reinstalled Joomla4.0.4 and Listmanger 4.0.6_40.

2 problems.
I can't find an ACL for the table.
I cannot create a menu item for a table.

The test table is only visible via a module and can also be edited (super user) .... but I cannot find any settings for other user groups and also no possibility of creating a menu item for the table

Regards franky466

Moonsoft support 2021-11-29 13:00:21


Can you tell me how to enhance the pdf button size or better, replace it with fontawesome icon ?

It is too tiny for users to notice it and needs an explanation

See for instance

Thanks for the help

Moonsoft support 2021-12-16 11:37:32


I did not find a way to hide the first column in list mode where it shows id numbers.
I know I can just hide .lm_extra_column with css display:none, but is there an option to prevent that column of showing ?


Moonsoft support 2021-12-20 10:54:03

Joomla 3.10.4
List Manager 2.7.3


I would like to import a CSV file with a multivalue column in it so that it would populate a multivalue field in my list. But don't know how to separate text values that I want in my multivalue field… If I check an exported CSV (export data to csv format), the text multivalues are space separated but if my values have text with spaces in them, I don't understand how that could work.

Don't know if I made myself clear…


Moonsoft support 2021-12-21 16:50:03


The subject says it all : For the same list, if I call it by its menu, the interface gets translated in french, if I use a module, it's in english. Why ?


Moonsoft support 2022-01-28 21:53:36

I can't find ACL settings in List Manager 4.1.9
Can somebody help me?

Edited by ploten - 29.01.2022 09:17

Moonsoft support 2022-02-02 11:58:35

I have a field COLOR with type Option List
There is 3 options
Values - Names
1 - Red
2 - Blue
3 - Green
So in database I have only values 2,1,3,1... in this field
And when I place Filter in Data Layout there is no Names of the values in select list, there is values 1,2,3!!! And they don't work! No filtering! After choosing any of them Table become empty!

Edited by ploten - 02.02.2022 12:18

Moonsoft support 2022-02-11 14:09:39

1- About the Type ' link to other list ' how to find the link (format) of the target list ?

2- would there be a way to create a field for an email that would be automatically sent (with a date entered) to the administrator as a reminder?

Moonsoft support 2022-02-20 20:52:49

I have a few questions regarding the use of the extension :)

1: after having configured the 'email' field with the type 'text' and put validation at 'email' I can enter any text (without format email @) it is accepted and displayed in the table. how to validate the 'email' format when typing? (with error if there is no @ for example)

2: how to change the order of the fields once they have been created? ex: email after address or name

3: I created a 'query' type field in order to display the sum of 2 other fields, unfortunately after several attempts of sql queries, the field does not display anything (empty) : I use the prefix of my Joomla’s table in the query ( joomlaPrefix_myListName ) and no-prefix for the field names (field1+field2) ex:
SELECT Id, field_text_6 + field_text_5 FROM gf50x__MaList Id field_text_5 + field_text_6 table contains about thirty (30) fields, any idea to display it correctly in fronted?

Thank you for your responsiveness and valuable advice.

Moonsoft support 2022-02-24 12:09:50

when i use the fronted-editor (the little pen) to modifie or add contents , my popup view contain this error :

« C:\wamp64\www\myJoomlaWebsite\modules\mod_listmanager\helper.php:509:
array (size=0)
empty »

« C:\wamp64\www\myJoomlaWebsite\modules\mod_listmanager\helper.php:509:
array (size=2)
0 => string 'LMJQ('#fld_19').rules('add', {


});' (length=80)
1 => string 'LMJQ('#fld_19').rules('add', {


});' (length=107) »
NB: i'm not sure but i think that comes frome the moment i upgrade ListManager to 2.7.4 ?!

thank you.

Moonsoft support 2022-03-18 08:23:17

Hi MSTeam

I need help please...

After I configured Fields/Columns to be include in bulk update and added bulk update options in data layout by adding it after adding top toolbar to the table, BUT the bulk update function in front page is NOT function at all.
When I choose one/more column in front page from the table data I added then after I click on bulk update bottom up there, it opens uneditable forums window and can't enter any data there, even if fields type set to Number/Text/Options.

I hope you can help me solve this problem, Thank you



Edited by aliwari - 18.03.2022 08:27

Moonsoft support 2022-03-21 14:53:24

Hi MSTeam
I have problem with Table/List Configuration in Fields/Columns configuration area, I can't save it or close it after i change some configuration, and now the table shows error in frontside when i click to edit the data inside the table by editable inline function.
The error msg is :"You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '002' at line 3"
i'm using Joomla! 4.1.0
List Manager 4.1.13

what can I do to fix this problem please ?



Moonsoft support 2022-03-24 13:48:03

Hi LMS Team,

Would you please tell me how can I configure a form column to check the user entered data before filling up the whole form and save it, I mean what code I should add in the Fields/Columns/Custom Validation to check if the entered data during filling the form is already exist in the database table or not? and if it's exist, the column should show a sign during filling time such as turning red or something like that.
I did configured one column as unique, so user can't entered the same data on the same filed. but the user will not know about it until he/she save it.



Moonsoft support 2022-03-28 20:15:14

Hi MSTeam,

I updated to LM4.1.14 (latest version) and I'm using Joomla 4.1
The bulk update is not working for the filed type TODAY (date) & USER.
For date and other filed type it seems to be working ok
how to fix it please.....



Moonsoft support 2022-03-28 20:36:10

Hi MSTeam,
I applied SQL query in the multiple values for Fields/Columns as bellow
SELECT filed_id FROM `table_name ` WHERE 1
when add new record or edit inline in front page , the list open and can show a selected menu but nothing to show there its just blank menu
I tested the query in Sql server its working fine and can show the data already stored in that filed.
is there anyway to fix this please ?

I also wonder if I can have an entire build in search/orderable in the option list can, it can show on top when click to choose value from the option list.
I think this is really needed especially if the list value to choose is long, it will help the user to select the value quickly



Moonsoft support 2022-04-07 19:33:56

It seems like the version for joomla 3 has not been updated for php 8.1

Error is
Exception Type: TypeError
File: /administrator/components/com_calcbuilder/models/utility.php
Line: 423
Message: count(): Argument #1 ($value) must be of type Countable|array, null given

Could you correct it and elsewhere ?

thing like (is_countable($data) && count($data)) should be ok

Moonsoft support 2022-04-19 14:54:13

Hi MSteam

Could you please tell me how can I make connection for column/value on 2 tables

For example I have a table1 with 3column value (user_id as a text type value),( on_off as option list type value with 2 options in it On/Off), and (owner_id as user type value), on the other hand I have a table2 with 3column value as well (user_id as an option list type value + applied SQL query under the option list for the user_id/table2 as "select user_id as id, user_id as value from table1 where user_id= ##id_user##"and (owner2_id as user type value).

*table1/user_id has 3 record each one has a value "sara", "sara1", " sara2", and for on_off column value is set as "on" for both "sara" and "sara1" and set to "off" value for "sara2".
when I create new record in table2 I can see a list menu in the filed of user_id showing the 3 sara from table1 which is working perfect.

my issue is how can I make it to show "on" in table2 recored after I choose "sara" or "sara1" from the list? or to show no if i choose "sara2" since On/Off is can be modified in table1 only

your help is appreciated



Moonsoft support 2022-04-24 19:06:43

Hi LMSteam,

I'm Have some issues in LM4.1.15 :

1- Checkbox Filter show only database value not screen value (I have option list using different id, value), but table is showing screen value normal ,and if I use the (select) filter it show screen value normal. only this is not showing when i use Checkbox Filter

2- Filter page not saving previous stored Field, it only saves the name of the filter and every time I need to add/edit the filter I have to reconfigure all the filters previously stored.

3- Bulk update stay on the same page after saving, it does not redirect back to table, need manually click back.

4- in the Data Layout page if you add toolbar above the table, then by accident you saved the page without adding any option/filter to the toolbar , then you will loose the middle table, it will just disappear and can't be recovered by access the page again.



Moonsoft support 2022-04-24 19:17:41

Hi LMSteam,

Where can I get the URL of the Hyperlink cell the showing in the table after setting the column to link to other list? I need the link to configure menu to open the target table insted of clicking on the Hyperlink Cell inside the table.



Moonsoft support 2022-05-26 12:23:23


Multiple option (check) and Multiple option (list) is not working when editable inline, it's only store one value to the cell even after choosing multivalve ...



Moonsoft support 2022-05-26 12:42:21


Recently I tried many Joomla template other than the default Cassiopeia template, but sorry to tell that all other template have some issues in showing LM table correctly. and I believe these issues are related to the templates CSS configuration.
Is there a standard way to let LM table show table on those template as it does on default Cassiopeia template?



Moonsoft support 2022-06-20 13:26:28


is it possible to transfer the list in joomla 3 to joomla 4?

Thank you in advance for your help.

Best regards,

Moonsoft support 2022-08-29 23:13:02

The site is running Joomla 4.2. Your extension was the only one of 5 that needed updating that didn't update. I keep getting "Invalid extension update."

Should I download the 4.2 extension and install it like a new extension? Will this erase my calculator? Any help would be appreciated.


Moonsoft support 2022-09-16 06:31:36

Retool Software Dev is accessing my calcbuilder data bases for competitors website. Is there any way to stop this

Moonsoft support 2022-09-27 23:12:41

Just downloaded and installed it on J4.2.3 with PHP 8.1. I'm just testing right now, but running into a problem...

I am able to set up Form Fields, I'm not using any PHP code or JS Code, and each time I try to select a Spreadsheet and hit Save I get the following error:

An error has occurred.
0 Undefined constant "Moonsoft\Component\Calcbuilder\Administrator\Model\DS"

I haven't been able to test any further because I need it to pull from an xlsx, but I'm sure once I get some help with this error I can figure the rest out pretty quickly.


Edited by Crimmel - 27.09.2022 23:28

Moonsoft support 2022-10-22 11:27:53


Just updated to v. 2.7.6 on Joomla 3.10.10 site.
When I select manage data for a list, I get this error: count(): Argument #1 ($value) must be of type Countable|array, null given.
Server uses PHP 8.x and I can't go lower.

What can I do?


Moonsoft support 2022-11-20 04:59:34

After I remove existing records via Empty or Delete from a list in the admin site I cannot load the list on the front end. Error as noted below:

With spinning circle.

document.getElementById('cloak4fd91315d162c07089d2094bebae1cb5').innerHTML = ''; var prefix = 'ma' + 'il' + 'to'; var path = 'hr' + 'ef' + '='; var addy4fd91315d162c07089d2094bebae1cb5 = 'ki0kk' + '@'; addy4fd91315d162c07089d2094bebae1cb5 = addy4fd91315d162c07089d2094bebae1cb5 + 'suddenlink' + '.' + 'net'; document.getElementById('cloak4fd91315d162c07089d2094bebae1cb5').innerHTML += addy4fd91315d162c07089d2094bebae1cb5; ","5":""}]}'/>

I tried uninstalling and reloading the application with the same results. It worked on the initial import of CSV data both in the front end and Admin. My front end Menu is using "List Manager Component".

The FireFox browser Debugger shows the following error:

SyntaxError: JSON.parse: expected ',' or '}' after property value in object at line 1 column 71 of the JSON data

Edited by ki0kk - 20.11.2022 15:31

Moonsoft support 2022-12-02 16:11:05

Could you please help me to understand how I configure a table in List Manager to show columns without wrapping the content and preferably to be able to scroll to the right in order to show the full list of columns?

Thanks a lot!


Moonsoft support 2022-12-30 23:55:27

I creta e new list but on my front error appears an error:
You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '-volkstriathlon WHERE Key_name = 'PRIMARY'' at line 1

The List is empty.

What shall I do ?

Greetings from Berlin

Moonsoft support 2023-01-16 01:11:28

please help to resolve:
I have some fields (radiobutton and multiselect lists) with data from other tables. In New or Edit forms I see all normal but in Detail view there are only indexes (id_internal) but not a corresponding data.

Moonsoft support 2023-01-17 12:31:07

How can I manage that only data are displayed according to a SQL-WHERE-Clause ?
I have configured all details and coloms but only special-Data should be displayed like a WHERE statement...

Greetings from Berlin / Germany

Moonsoft support 2023-02-06 16:02:50


Joomla 4 version.

I don't understand why I still get this message when my csv file has the correct number of columns.
Is it a problem with the column separation character? I use the ";"
Thank you for your help

Edit : I was able to import my file directly into the database through phpmyadmin, but even though I think I have everything set up, nothing is displayed on the front end.

Edit 2 : I was able to get the display to work. It was just missing the search bar to get everything to display.

Edited by phil64 - 06.02.2023 21:38

Moonsoft support 2023-02-28 04:43:53

I have more than 20 sites which have essential information in different matrix. Has anyone figured a simple way around not having the matrix in the Joomla 4 version

Moonsoft support 2023-04-05 21:35:03


I'm trying to figure out what kind of Excel functions Calcbuilder supports, but I don't see any information anywhere.

Should I assume it supports all Excel functions?


Moonsoft support 2023-04-12 18:04:35

I use List Manager 4 and want to show a detail window of a list row.
This does not work.
I first tried to activated "Show Detail on row click" in Detail Layout -> does not work in front end
When I try to add button in Layout and move "Detail" Button there, it just shows "undefined" and the list won't load anymore.
Can you please help? Many thanks.

Edited by steamjoe2 - 12.04.2023 20:44

Moonsoft support 2023-05-10 13:07:18

Hi. I'm using version 4.3.1 on Joomla 4.2.9 and I do not see a Sections tab when I create a new calculator. I am therefore not able to add sections to my calculator.

Moonsoft support 2023-05-25 20:56:48

Hi folks,
running Joomla 4.3.1 and Listmanager 4.4.3 i get a message in my backend dashboard that theres an update for the listmanager to 4.4.4.
Since you don't offer an update via the joomnla server, i downloaded the latest version from your website and tried to update the package the usual way.
Takes a while and Joomla throws a 500 error, "Ooops, something went wrong".
Unzipped the package file and found 3 other zip-files inside, so decided to try it one by one. Same result.

What am i doing wrong?

For 60€ i would expect an update that works........


Moonsoft support 2023-06-06 14:02:35

Have upgraded to Joomla 4 and purchased/uploaded latest Listmanager. Using the instructions found in the tutorials for creating a module, there are no module options for List Manager. Also, there is nothing in the Joomla Menu system for selecting a list manager list.

Please fix.

Moonsoft support 2023-06-16 09:25:29

Im having a weird problem with my calculators. When I copy a calculator to change pricing. I have an issue where the option lists are out of order or they are showing in the front end "Some values are incorrect"

The fields havent changed just the pricing in the database. Im not sure what Im doing wrong here. Ive changed the database on the original file and all is working fine. Its only when i save the calculator and import it again with a new name that this happens.

Moonsoft support 2023-06-27 12:04:46

I have two fields in my table that are either "Yes" or NULL. When I use them as a filter with checkboxes I see:


But what I want to see is just:

Is there a way to make it not show NULL values as an option?

If I wanted to show the top option (I don't know why someone would want to... but *if*) I could always change the NULL values to just an empty string. But for me, I want to hide that option and only have the filter show the YES checkbox.

Moonsoft support 2023-07-28 16:04:10

I´m running Joomla 4.3.3 with Gantry 5 templates on my localsite. Version on Listmanager is 4.4.5.

Here is my problem. I did run the site on a Ubuntu linux OS and there does the listmanager tables show up.

I exported the database and setup the site on a WIN 11 computer.

Now the listmanager does not show up at all in the Joomla frontend?
The only things that is shown is the progress dots and then it is blank.

Any suggestions?

Edited by pynken - 28.07.2023 23:13

Moonsoft support 2023-08-27 04:12:20

Hi , currently I am using LM4 to list out my file upload . however I notice when I delete the list or update the file in table. It did not remove the previous file insert in the system. is there any ways or setting to also remove all those unused/previous file when i delete the list in table ,?

Moonsoft support 2023-10-14 21:07:11


List manager newbie here.

I haven't found any documentation for your File Upload field capability. Am wondering if I have it setup properly and am using it correctly.

I've created a list with 3 fields, ID, a text area field and a file upload field.

The ID and test area appear to be working properly.

- I click New on my data table. I'm taken to the form page.
- I enter text into the text area.
- I hit the browse button and select a file. A progress bar gives the appearance that the file uploads.
- I hit save
- I go back to my table and refresh.... the ID is properly incremented and text area is saved correctly, there is nothing in the file upload field.
(I checked my db with php admin and confirmed that field is empty

I have the file upload field setup as a text field in my db.

What I'd like is to be able to see a linked filename in my table. Is that the appropriate expectation ?

A couple more related questions....

- After submitting my form I'd like to redirect to a refreshed version of the table..... how could I do that ?

- where are the uploaded files stored ? is there a place to set that folder ?

Many thanks


Moonsoft support 2023-10-24 16:54:15


On your tutorial page :

you mention an rtf button for configuring the full export.

I cant find it in the joomla 4 version?

Moonsoft support 2023-10-27 02:09:33

Hello Moonsoft

I'm migrating from J3 to J4 and therefore I find a few differences to LM 2.8 in Version 4.5....

Right now I'm trying to edit an individual entry on a list in backend.
(In LM 2.8 it was manage data -> click checkbox for entry -> click edit)

After adding some toolbars on 'data layout', I did get my 'edit'-button back. But when I click either on "NEW" or "EDIT", I get the following error:
-> Cannot use object of type stdClass as array <-

What configuration could I be missing?

Thanks in advance.

Moonsoft support 2023-10-27 09:34:34

Hi everyone

I've got another issue: When trying to copy a list in backend, i get the following error: '.lm4_lm_listheader' doesn't exist.

What am I missing (or: why am I missing this table?)

Best regards

Moonsoft support 2024-02-04 02:15:28

Hi Moonsoft

I'm having a hard time figuring out what I need to enter in my custom-CSS to enable a table width of - let's say 1200px for a table like this one:

i guess i need to override this class: "table table-responsive-stack table-striped"
(or 3 classes because of the spaces?)

currently I'm trying a few variations of
#lm_content_wrapper .table-responsive-stack {
width = 1200px

but without success so far.

Can you point me in the right direction?
Thanks in advance

Best regards.

Moonsoft support 2024-02-06 20:35:17

Hello, newbie here!
How do I make images visible in the frontend?

Moonsoft support 2024-02-13 23:22:52

Im building a website using the Helix framework. Joomla 5. Ive set the results to appear in the modal window, however, when the page first loads, the modal heading and the add to cart button are appearing at the bottom of the page. Is anyone else having this problem? The problem doesnt occur on the Gantry framework and it could be a template code issue, however, Im trying to eliminate possible causes.

Edited by BPC2022 - 16.02.2024 02:22

Moonsoft support 2024-02-18 13:44:12

Running joomla 5.02 and latest listmanager. In table configuration I find "small" and "normal" as options and it seems not working. Would like to customize the table width as User pfnuesu did, But dont know where to find this paricular custom CSS file/ option to past pfnuesu code in. Little guidline is greatly appreciated. Kind Regards

Moonsoft support 2024-02-19 16:06:20

In Tableview/ Frontend email field I have got the Protection bot message to enable JS. Please guide me or/ and send me the code as I can see now in Menu custom Js button.
Kind Regards

Moonsoft support 2024-02-20 14:13:48


I'm new to List Manager and I'm gradually getting the hang of it but I'm still stuck on a few things.

First of all, I would like the frontend published page not to display a "New" and "Edit" buttons but I still want them in the backend Manage data to be able to add new entries there. I read posts in the forum referring to different views but I don't understand how to go about it.

I also have trouble adding photos to an entry. I set up a photo field in html type but I can't make it work. I would need to add photos which are already in my Joomla media folders. Is that possible?

I updated LM with the latest release (5.3.2) and I'm running Joomla 4.4.2.

Thank you for your help.

Marc Z

Moonsoft support 2024-03-04 04:00:40


I created a table named 'nabo_nblst_contacts' with a 'acym_user_id' field in the list manager. The 'acym_user_id' field is supposed to have calculated PHP to retrieve the value of the 'id' field from the 'nabo_acym_user' table. However, I encountered an issue where no value is being inserted into the 'acym_user_id' field, and I received a PHP Warning stating:
'Undefined array key "table_name" in C:\inetpub\nblst\administrator\components\com_listmanager\Model\ListheaderModel.php on line 193

Here is the code I'm using "<?php
// Load the AcyMailing library
$postData = $_REQUEST;

$helperPath = rtrim(JPATH_ADMINISTRATOR, $ds) . $ds . 'components' . $ds . 'com_acym' . $ds . 'helpers' . $ds . 'helper.php';

// Check if the helper file exists before including it
if (file_exists($helperPath)) {
include_once $helperPath;

// Check if the userClass is instantiated successfully
if (class_exists('AcyMailing\Classes\UserClass')) {
try {
// Instantiate the UserClass
$userClass = new AcyMailing\Classes\UserClass();

// Connect to your Joomla database
$db = JFactory::getDbo();

// Fetch the 'id' value from the 'nabo_acym_user' table
$query = $db->getQuery(true)

$userId = $db->loadResult();

// Check if 'acym_user_id' exists in 'nabo_nblst_contacts'
$query = $db->getQuery(true)
->where($db->quoteName('acym_user_id') . ' = ' . $db->quote($userId));

$existingUserId = $db->loadResult();

// If 'acym_user_id' doesn't exist, insert it
if (!$existingUserId) {
$query = $db->getQuery(true)


} catch (Exception $e) {
echo 'Error: ' . $e->getMessage();

Could you please advise me on what I might be missing in the code?


Moonsoft support 2024-03-10 15:20:42

I have got 2 lists. One List "Client", second list "Nationality". In list Client I got the field Text Nationality. Here I would like to select one of the values ( example Spanish| German...) from the list "Nationality". Anyone How, Please? Regards HM

Moonsoft support 2024-03-17 14:51:07

Dear Team,
I selected in field Columns Typ 'Datetime'. Date is fine but the time is always reset after saving to 00:00. (G-i), Tried different options. Could you please assist? also Aim missing just the time option.

Regards HM

Moonsoft support 2024-03-23 10:39:36

I can set up a new Calc or edit one of my old ones, I am in Joomla 4.4.3 and Calc 4.5
My old Calcs all work on the front end, but I just want to add more Options to my Option lists in the backend. I find that with new or old Calcs, the Add CVS file or Add Manually buttons don't work.
With my old Calcs, many of which will have three or four options to chose, none of these are displayed anywhere in the backend - they do show and work and on the front end. Its perplexing.
Great if there is a solution somewhere. Thankyou

Moonsoft support 2024-04-10 06:49:24

Hi there,

I'm attempting to establish fixed conditions using valid SQL in the fixed custom filter, but I'm not seeing any results in the frontend table. I utilized the query:

SELECT * FROM table_name WHERE field = '123';

Did I overlook something here?


Moonsoft support 2024-04-11 21:04:57


How can I have 2 different Details views for my Listing ?

I have 1 List (Cars) & 1 List (House) with different fields, but when i edit the Detail view, its the same for all my lists.

Can you help me ?


Moonsoft support 2024-04-29 17:03:19

the last version i got is 5.3.5
you also send me an email informing about fix on COM_LISTMANAGER_BACK and COM_LISTMANAGER_DELETE
and the current available on the website is only 5.3.2
how to have the last versions, did you remove them because they have some major problems

Moonsoft support 2024-05-05 10:29:33


As already mentioned in some mails, we have a problem with the fields/column loading and saving from a joomla table. See your comment in one of the latest mails:
''ok, with the video we are not able to see the request or the response thrown by your server, but given the huge amount of time the fields page took to load we assume there are a big number of fields at your table,so we think you may be facing any restriction about the number of variables your server allows to handle in a single request. For ex, the


setting can be restricting the request, thus throwing an error and making the save function fail. It's just a guess, if you are able to provide a temp access we can debug directly at your site and let you know our findings."

I give you the credentials of the superadmin


Moonsoft support 2024-05-09 12:17:16

The search based on a concatenated field doesn't work when the search type is set to 'Exact'. It reports 'No Result' even when the search value entered matches exactly a value in the database column. Here's my scenario...
I have three fields: Forename, Surname and Full_Name.
Full_Name is a calculated/concatenated field using the formula: concat(`firstnames`,' ',`surname`)
If I set the search type to 'Broad' the search dislays matched records on either the Forename or the Surname (as expected) but if I set the search type to 'Exact' it fails to find/display any.
So if I search for my name: Richard Williams it doesn't match/display it, so the issue appears to be something to do with matching the space character between the two words.


Create dynamic calculators

Buy now!
Support/development 10 hours

Get a bigger amount of hours for more complex tasks and get a 10% discount

Buy now!